This is a very easy fix, to remove the following warning:
```
WARNING: Running the setup command as `meson [options]` instead of `meson setup [options]` is ambiguous and deprecated.
```
The fix is to just run `meson setup` instead and it works like a charm.
Related PRs: i3/i3lock#365 and i3/i3status#538.
This causes test breakage when the developer/tester is running the tests
in i3, as the actual active instance socket is used instead of the test
instance.
Besides breaking tests, this is quite dangerous as tests like 319-gaps.t
will replace the **actual** config of the user (i.e.
~/.config/i3/config) instead of the current test config.
Broken after #5987
This was originally mentioned in #3085 but left for a future PR.
One of the noticeable limitations is that pressing the modifier while
the drag is already initiated, will not swap the containers but instead
cancel the drag. This is because of how `drag_pointer()` is written and
would be quite an involved case to handle it.
The crash was brought up in a comment in
https://github.com/i3/i3/discussions/6076#discussioncomment-9536969
The cause is that the command criteria are matching a window in the
scratchpad. In that case, the assertion in get_output_for_con() fails.
That happens because there is no `Output` for the `Con` output of a
scratchpad window.
I've decided to *not* remove the offending assertion but rather rely on
the caller not using the function with internal containers. My reasoning
is:
1. If get_output_for_con can return NULL then the caller will either
segfault (which is worse) or needs to check the return for NULL.
2. The case where the return can be NULL is already known, it happens
for internal containers.
3. Therefore, the caller should already prevent the situation with a
call to con_is_internal(). Thus, the `assert`ion can remain.
There is also the potential fix of con_get_workspace returning some
arbitrary output (e.g. first in the list or currently focused one)
instead of NULL. This can lead to more tricky to catch bugs.
This adds some detail to the workspace events documentation and is
written along the same lines as the window events documentation. This
was brought up in [#4392 (issue)](https://github.com/i3/i3/issues/4392).
This fixes the following warnings on 32 bit systems
```
[60/108] Compiling C object i3.p/src_regex.c.o
In file included from ../include/all.h:40,
from ../src/regex.c:10:
../src/regex.c: In function ‘regex_new’:
../include/log.h:29:33: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘size_t’ {aka ‘unsigned int’} [-Wformat=]
29 | #define ELOG(fmt, ...) errorlog("ERROR: " fmt, ##__VA_ARGS__)
| ^~~~~~~~~
../src/regex.c:35:9: note: in expansion of macro ‘ELOG’
35 | ELOG("PCRE regular expression compilation failed at %lu: %s\n",
| ^~~~
[93/108] Compiling C object i3-input.p/i3-input_main.c.o
../i3-input/main.c: In function ‘finish_input’:
../i3-input/main.c:173:29: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 2 has type ‘size_t’ {aka ‘unsigned int’} [-Wformat=]
173 | printf("occurrences = %ld\n", cnt);
| ~~^ ~~~
| | |
| | size_t {aka unsigned int}
| long int
| %d
```
One case when this might be useful is when i3 is restarted and there are
children that terminate after the previous i3 instance shut down but
before the new one set things up.
Fixes#5756
While this initially worked fine, at some point these patches broke
because libcairo started calling shmget(2) - a syscall not covered by
any pledge promise - and a common pitfall when using pledge with
graphics-oriented applications.
Various attempts were made to fix them, but at some time they were
simply disabled in the OpenBSD port:
a4a9f41dd75a03c386ba
This seems pointless and creates needless friction both for the i3 team
who was willing to carry ugly code and for the OpenBSD ports maintainers
who had to disable that code again.
Let's abandon this experiment.
Commit 3ae5f31d0 introduced the I3SOCK environment variable. This
prevents us from having to call `i3 --get-socketpath'. In case the
variable doesn't exist, fall back to the old ways.
Signed-off-by: Wesley Schwengle <wesleys@opperschaap.net>
If there is no newline character at the end of the version option's
output, the next command line prompt is written left to the version,
rather than under it.
Add simple `if exists' construct in the subscribe function. This
prevents a somewhat cryptic warnings such as these:
Use of uninitialized value $type in hash element at
/usr/share/perl5/AnyEvent/I3.pm line 309.
We still warn the user, but it is much clearer as to what the cause is.
It now shows something like this:
Could not subscribe to event type 'foo'. Supported events are _error
barconfig_update binding mode output shutdown tick window workspace
Signed-off-by: Wesley Schwengle <wesleys@opperschaap.net>
Since there is no separate error handling the `SIGUSR2` signal is
registered to get the write return code after exiting the program.
Fixes#5958
---------
Signed-off-by: Andre Werner <andre.werner@systec-electronic.com>
eg if you have workspaces: { 1, 2:a, 2:b, 3 } and are on workspace 1,
then 'workspace next' should traverse 1 -> 2:a -> 2:b -> 3 -> 1 instead
of 1 -> 2:a -> 3 -> 1.
Fixes#4452
The [official build instruction][1] are deprecated on Meson 1.3.1.
These command:
mkdir -p build && cd build
meson ..
ninja
... work but will yield the following warning:
> WARNING: Running the setup command as `meson [options]` instead of `meson setup [options]` is ambiguous and deprecated.
Here's the correct way, according to the [meson documentation][2]:
mkdir -p build
meson setup build
meson compile -C build
meson install -C build
[1]: https://i3wm.org/docs/hacking-howto.html#_building_i3
[2]: https://mesonbuild.com/Quick-guide.html#compiling-a-meson-project
This had pretty much identical behaviour to hide_edge_borders which made
it confusing. The `hide_edge_borders smart_no_gaps` implementation has an extra check
which fixes#5406.
Enforces a rule that we have followed for years now. Yes, the diff is
quite big but we get it over with once and we prevent having to nit-pick
future PRs.
If a window occupies the entirety of its workspace vertically and/or horizontally, pass it the _NET_WM_STATE_MAXIMIZED_{HORZ, VERT} atoms. This helps applications like Google Chrome draw the tab bar correctly and handle tab clicks correctly (see https://crbug.com/1495853).
This change is based on work from @yshui in #2380.
Grabing the pointer produces a `GrabFrozen` error in applications that
are run from key bindings. Since we don't need the pointer in such
cases, we can change the call to use ASYNC. This seems to be a
historical leftover.
I've tested locally that these still work:
- bindsym $mod+x ...
- bindsym --release $mod+x ...
- bindsym $mod+button1 ...
- bindsym --release $mod+button1 ...
- bindsym --release $mod+x exec program that grabs the keyboard
now works (see original issue)
Even in the main branch, I actually couldn't get `import` and `xdotool`
to fail with the pointer being frozen, potentially because these
programs wait a bit for the pointer to be unfrozen like i3lock does.
This patch came up in
https://github.com/i3/i3/issues/5735#issuecomment-1781321011
I wonder why the pointer is actually grabbed.
The argument I change in `xcb_grab_key` there, is `pointer_mode`, from
https://www.x.org/releases/X11R7.7/doc/man/man3/xcb_grab_key.3.xhtml:
```
pointer_mode
One of the following values:
XCB_GRAB_MODE_SYNC
The state of the keyboard appears to freeze: No further keyboard events are generated by the server until the grabbing client issues a releasing AllowEvents request or until the keyboard grab is released.
XCB_GRAB_MODE_ASYNC
Keyboard event processing continues normally.
```
I traced via `git blame` the usage of `xcb_grab_key` throughout 14 years
of i3 development and it seems that `pointer_mode` was always set to
`XCB_GRAB_MODE_SYNC`, going all the way back to
b664456706.
Fixes#5735
When the font from testcase's config exists on the system,
load_configuration() does not fallback to a 'fixed' one resulting in a
fail of this case.
The fallback scenario is added as well.
Instead of creating a graphics context for every surface_t, this commit
adds a cache that allows to "remember" up to two GCs. Thus, the code
uses less GCs. When a GC from the cache can be used, this also gets rid
of a round-trip to the X11 server. Both of these are tiny, insignificant
savings, but so what?
Since GCs are per-depth, this code needs access to get_visual_depth().
To avoid a code duplication, this function is moved to libi3.
Fixes: https://github.com/i3/i3/issues/3478
Signed-off-by: Uli Schlachter <psychon@znc.in>
Unfortunately, grabbing / ungrabbing doesn't seem to work correctly in
xvfb so we can't really test this.
I also fixed the deduplication code in bindings_get_buttons_to_grab().
Having just a single fork is beneficial, as it preserves the approprate
parent information for the children of i3, which is useful in some
scenarious e.g. when a child wants to do something on the wm's exit
(possible via `prctl(PR_SET_PDEATHSIG, ...)`).
Moreover, this is a zero-cost benefit: i3 is already using libev with
the default loop, which automatically reaps all the zombie children even
when there is no corresponding event set.
Resolves#5506
Also updates the function to use proper types, const and style.
The warning:
../i3/i3-input/main.c: In function ‘finish_input’:
../i3/i3-input/main.c:187:13: warning: ‘__builtin_strncat’ specified bound depends on the length of the source argument [-Wstringop-overflow=]
187 | strncat(dest, command, inputlen);
| ^
../i3/i3-input/main.c:175:20: note: length computed here
175 | int inputlen = strlen(command);
Which is triggered because gcc thinks it's bad that `input_len` (the
length of the source in the copy) is used instead of a length that is
inside the limits of the allocated size for the destination. However, in
practice, `full_len` is always than `input_len`.
They are newly failing since the previous commit (upgrading to Ubuntu focal),
so instead of debugging what the issue is, let’s just remove them entirely.
Not many i386 users are left, as the world is on amd64 and arm64 these days.
We use run_command for conditionals, meaning meson execution should not stop
when the command returns false. This change keeps our meson setup working
throughout the upcoming change of default behavior (check: true).
This requires --buildtype=debugoptimized (or --buildtype=release, but
optimizations need to be enabled), and will allow us to keep the i3 build free
of warnings during development.
Distributions like Debian build with -D_FORTIFY_SOURCE=2.
Unlike in the man page, only one --entry-type is reasonable possible.
On using multiple --entry-types and a command offers multiple, duplicates are removed i3-dmenu-desktop.
See more at #5291
added --show-duplicates flag for this
Previously, the code was directly accessing con->border_style, which circumvents
the special-casing for stacked/tabbed containers that forces window titles even
for title-less containers.
Fixes https://github.com/i3/i3/issues/5269
This commit moves subtracting the global gaps from the workspace gaps:
previously, this calculation was done while parsing the configuration
(order dependent), now it’s done at workspace assignment evaluation time.
related to https://github.com/i3/i3/issues/3724
fixes https://github.com/i3/i3/issues/5253
Currently, containers only consider their neighbors and screen edges.
If >2 containers are in a line, the outer containers adjust from outer gaps, but
the middle containers know nothing of this and only consider the inner gaps.
When the outer gaps differ substantially from the inner gaps, the left-most and
right-most containers are smaller as only they adjust for the larger outer gaps.
This commit changes the rendering: containers are now always inset by their
inner gap settings, and workspace containers is now inset by the outer gap
settings.
The result is that many tiled containers have the same size, and the gaps
overall work as the user might expect them to previous combinations of
outer/inner gap settings still produce the same result, albeit with fixed
outer-most sizes.
fixes https://github.com/Airblader/i3/issues/22
related to https://github.com/i3/i3/issues/3724
Co-authored-by: Cameron Leger <contact@cameronleger.com>
This reverts commit 6b658f88be.
The commit was misguided: the pixel values are already run through logical_px()
when parsing the configuration directive or command, so they should not be run
through another logical_px() pass at rendering time.
See https://linux.die.net/man/3/vendorshell
The important part is:
> MWM_DECOR_ALL
> All decorations *except* those specified by other flag bits that are set
This is the last remaining diff from the i3-gaps tree.
related to https://github.com/i3/i3/issues/3724
Tested using the following config with picom:
bar {
i3bar_command i3bar -t
status_command i3status
colors {
# fully transparent text on opaque background:
statusline #ffffff00
background #000000ff
}
}
I’m still not 100% happy with how the function turned out (it still does too
many things at once), but this seems like an improvement — at least reading and
navigating the code with LSP now works better.
This code was copied over unmodified from https://github.com/Airblader/i3-gaps.
I have split out the differences between i3-gaps and i3 into three areas:
1. Gaps
2. i3bar height
3. rgba colors
asciidoctor is a bit stricter in what it accepts: the leading and trailing lines
need to have the exact same number of characters, and apparently there needs to
be a blank line after the trailing delimiter line.
Currently, the cursor is XCURSOR_CURSOR_TOP_RIGHT_CORNER (== BORDER_TOP),
but the intended cursor was XCURSOR_CURSOR_MOVE.
noticed this as part of https://github.com/i3/i3/issues/5198
With the introduction of tiling drag, i3’s click behavior in window decorations
changed: before tiling drag, in a tabbed or stacked container, a window would be
focused/raised on mouse down. After tiling drag, on mouse up.
This commit sends XCB_ALLOW_REPLAY_POINTER before running the tiling drag code,
thereby restoring the focus/raise-on-mouse-down behavior without affecting the
tiling drag operation.
fixes https://github.com/i3/i3/issues/5169
Commit 70f23caa9a introduced new issues.
Instead of distinguishing " and \, as that commit attempted,
let’s instead keep the level of escaping by escaping each backslash,
just like each double quote.
I tested this with:
# recommended way to quote $ and " in quoted arguments, not ambiguous
Exec=/tmp/logargs "hello \\$PWD \\"and\\" more"
# permitted way to quote $ and " in quoted arguments, but ambiguous
Exec=/tmp/logargs "hello \$PWD \"and\" more"
# permitted way to quote arguments, slightly unusual to quote first arg
Exec="/tmp/logargs" hey
# a complicated shell expression, not ambiguous
Exec=sh -c "if [ -n \\"\\$*\\" ]; then exec /tmp/logargs --alternate-editor= --display=\\"\\$DISPLAY\\" \\"\\$@\\"; else exec /tmp/logargs --alternate-editor= --create-frame; fi" placeholder %F
related to https://github.com/i3/i3/issues/4697 (electrum, original)
related to https://github.com/i3/i3/issues/5152 (phpstorm, breakage)
related to https://github.com/i3/i3/issues/5156 (emacsclient, breakage)
- manage.c still used wrong `motif_border_style == BS_NORMAL`
- container must be set to floating first for correct code path and
correct max_user_border_style to be used in con_set_border_style
- Motif test now includes default_floating_border
Context:
Motif hints [1] allow applications to request specific window manager
frame decorations. Most applications like alacritty, chromium, and
godot, use the hints as a binary flag, setting or un-setting
`MWM_DECOR_ALL`.
Previously [2], we had disallowed applications to set the "normal"
border style through motif hints. This effectively meant that users that
had set `default_border pixel` would not see applications spawning with
normal decorations [3].
However, that meant that applications like godot [4] could not toggle
their border between none and normal so the behaviour changed with
v4.21 [5].
That change however also allowed applications to override the default
none/pixel border style the user set. For example, alacritty can be
configured to either have all or no decorations [6] and they always set
the motif hint on startup, completely overriding i3 user's preference:
1. If decorations are disabled with alacritty's config then they will
override `default_border normal` and no title will be used.
2. If decorations are enabled (also the default behavior) with
alacritty's config then they will override `default_border pixel` and
a title will be used.
This patch redefines how we interpret motif hints. When a client sets
`MWM_DECOR_ALL`, we interpret it as "the maximum decoration the user has
allowed for this window". I.e., if a client was all decorations and the
user expects the window to not have a title, we don't include the title
in "all" decorations.
The user's preference is determined by these:
1. For new tiling windows, as set by `default_border`
2. For new floating windows, as set by `default_floating_border`
3. For all windows that the user runs the `border` command, whatever is
the result of that command for that window.
Example:
- User opens new tiling window with `default_border pixel` => maximum
decoration = PIXEL
- Window requests all/title decorations => i3 enforces the user maximum
decoration, PIXEL (no change)
- Window requests no decorations => i3 accepts it and sets border to
NONE, maximum decoration remains PIXEL
- User toggles the border, next style is NORMAL => maximum decoration is
now NORMAL
- Window requests no decorations => i3 accepts it and sets border to
NONE
- Window requests all/title decorations => i3 accepts it and sets the
maximum border, NORMAL
- User toggles the border, next style is NONE => maximum decoration is
now NONE
- Window requests all/title decorations => i3 enforces the user maximum
decoration, NONE (no change)
With this, we will still allow behaviour where windows can toggle their
border style with motif hints [4][7].
Reference/footnotes:
[1]: https://linux.die.net/man/3/vendorshell
[2]: https://github.com/i3/i3/pull/2386
[3]: Notice how there is apparently a gap because `default border none`
settings would not be respected if an application wanted just "border"
decorations but this was never reported, probably because of the rare
conjunction of applications requesting that and users defaulting to none
borders.
[4]: https://github.com/godotengine/godot/issues/40037
[5]: https://github.com/i3/i3/pull/5135
[6]: Set by an underlying library here:
fafdedfb7d/src/platform_impl/linux/x11/util/hint.rs (L113-L142)
called by alactitty here:
4ddb608563/alacritty/src/display/window.rs (L341)
[7]: https://github.com/i3/i3/issues/3678Closes#3678Fixes#5149
The only place where this matters is with command `border toggle` which
cycles through them. Luckily, the behaviour does not change because the
order is the same with the new enum.
Currently, the cursor is XCURSOR_CURSOR_TOP_RIGHT_CORNER (== BORDER_TOP),
but the intended cursor was XCURSOR_CURSOR_MOVE.
noticed this as part of https://github.com/i3/i3/issues/5198
With the introduction of tiling drag, i3’s click behavior in window decorations
changed: before tiling drag, in a tabbed or stacked container, a window would be
focused/raised on mouse down. After tiling drag, on mouse up.
This commit sends XCB_ALLOW_REPLAY_POINTER before running the tiling drag code,
thereby restoring the focus/raise-on-mouse-down behavior without affecting the
tiling drag operation.
fixes https://github.com/i3/i3/issues/5169
Commit 70f23caa9a introduced new issues.
Instead of distinguishing " and \, as that commit attempted,
let’s instead keep the level of escaping by escaping each backslash,
just like each double quote.
I tested this with:
# recommended way to quote $ and " in quoted arguments, not ambiguous
Exec=/tmp/logargs "hello \\$PWD \\"and\\" more"
# permitted way to quote $ and " in quoted arguments, but ambiguous
Exec=/tmp/logargs "hello \$PWD \"and\" more"
# permitted way to quote arguments, slightly unusual to quote first arg
Exec="/tmp/logargs" hey
# a complicated shell expression, not ambiguous
Exec=sh -c "if [ -n \\"\\$*\\" ]; then exec /tmp/logargs --alternate-editor= --display=\\"\\$DISPLAY\\" \\"\\$@\\"; else exec /tmp/logargs --alternate-editor= --create-frame; fi" placeholder %F
related to https://github.com/i3/i3/issues/4697 (electrum, original)
related to https://github.com/i3/i3/issues/5152 (phpstorm, breakage)
related to https://github.com/i3/i3/issues/5156 (emacsclient, breakage)
- manage.c still used wrong `motif_border_style == BS_NORMAL`
- container must be set to floating first for correct code path and
correct max_user_border_style to be used in con_set_border_style
- Motif test now includes default_floating_border
Context:
Motif hints [1] allow applications to request specific window manager
frame decorations. Most applications like alacritty, chromium, and
godot, use the hints as a binary flag, setting or un-setting
`MWM_DECOR_ALL`.
Previously [2], we had disallowed applications to set the "normal"
border style through motif hints. This effectively meant that users that
had set `default_border pixel` would not see applications spawning with
normal decorations [3].
However, that meant that applications like godot [4] could not toggle
their border between none and normal so the behaviour changed with
v4.21 [5].
That change however also allowed applications to override the default
none/pixel border style the user set. For example, alacritty can be
configured to either have all or no decorations [6] and they always set
the motif hint on startup, completely overriding i3 user's preference:
1. If decorations are disabled with alacritty's config then they will
override `default_border normal` and no title will be used.
2. If decorations are enabled (also the default behavior) with
alacritty's config then they will override `default_border pixel` and
a title will be used.
This patch redefines how we interpret motif hints. When a client sets
`MWM_DECOR_ALL`, we interpret it as "the maximum decoration the user has
allowed for this window". I.e., if a client was all decorations and the
user expects the window to not have a title, we don't include the title
in "all" decorations.
The user's preference is determined by these:
1. For new tiling windows, as set by `default_border`
2. For new floating windows, as set by `default_floating_border`
3. For all windows that the user runs the `border` command, whatever is
the result of that command for that window.
Example:
- User opens new tiling window with `default_border pixel` => maximum
decoration = PIXEL
- Window requests all/title decorations => i3 enforces the user maximum
decoration, PIXEL (no change)
- Window requests no decorations => i3 accepts it and sets border to
NONE, maximum decoration remains PIXEL
- User toggles the border, next style is NORMAL => maximum decoration is
now NORMAL
- Window requests no decorations => i3 accepts it and sets border to
NONE
- Window requests all/title decorations => i3 accepts it and sets the
maximum border, NORMAL
- User toggles the border, next style is NONE => maximum decoration is
now NONE
- Window requests all/title decorations => i3 enforces the user maximum
decoration, NONE (no change)
With this, we will still allow behaviour where windows can toggle their
border style with motif hints [4][7].
Reference/footnotes:
[1]: https://linux.die.net/man/3/vendorshell
[2]: https://github.com/i3/i3/pull/2386
[3]: Notice how there is apparently a gap because `default border none`
settings would not be respected if an application wanted just "border"
decorations but this was never reported, probably because of the rare
conjunction of applications requesting that and users defaulting to none
borders.
[4]: https://github.com/godotengine/godot/issues/40037
[5]: https://github.com/i3/i3/pull/5135
[6]: Set by an underlying library here:
fafdedfb7d/src/platform_impl/linux/x11/util/hint.rs (L113-L142)
called by alactitty here:
4ddb608563/alacritty/src/display/window.rs (L341)
[7]: https://github.com/i3/i3/issues/3678Closes#3678Fixes#5149
The only place where this matters is with command `border toggle` which
cycles through them. Luckily, the behaviour does not change because the
order is the same with the new enum.
Originally I thought we should remove the build and test steps in favor of the
“meson dist” step. But, then we lose verbose build command lines and access
to the test logs, and having the failing test logs readily available is
critical.
So, instead, let’s make the “meson dist” step not repeat the work that was
already done in earlier steps. The Meson manual even documents the --no-tests
flag precisely for our use case:
> The meson dist command has a --no-tests option to skip build and tests steps
> of generated packages. It can be used to not waste time for example when done
> in CI that already does its own testing.
From https://mesonbuild.com/Creating-releases.html
fixes https://github.com/i3/i3/issues/5145
Before this commit, the test was flaky: it relied on the Perl test process
sending the kill() system call before i3 exited. This can easily be triggered
by adding a sleep(1) after the “cmd 'exit'” line.
This is because with i3_autostart => 1 (the default), i3test.pm kills i3
or bails out if it can’t.
So, we instead set i3_autostart => 0 and launch i3 ourselves.
This will unfortunately still make the code kill i3 and bail out,
because launch_with_config updates the $i3_pid variable that i3test.pm
uses for tracking whether it should clean up i3.
The solution is to exit i3 by calling exit_gracefully,
which will make the i3test.pm state correct.
related to https://github.com/i3/i3/issues/3009
Count extra_bytes correctly
If there is a variable with the same name as the rest of another
variable after removing $, then it will be counted twice. Therefore,
we need to completely replace it with spaces (variable names cannot
contain spaces) in order to correctly calculate the length of a new
string.
fixes https://github.com/i3/i3/pull/5002
Co-authored-by: Ivan Zharov <zhiv.email@gmail.com>
Co-authored-by: Michael Stapelberg <stapelberg@users.noreply.github.com>
The testsuite already contains quite a number of SIGCHLD handler
installation/un-installations. Here is my attempt at an inventary.
1. complete-run.pl installs a SIGCHLD handler in the `start_xserver()` function
call, which prints an error and exits when all x server processes have exited.
2. In the TestWorker child process, a SIGCHLD handler is installed to reap dead
test child processes.
3. The TestWorker child process forks another child process for running the test
file, where the previously installed SIGCHLD handler (point 2) is unset.
This is where this commit comes in: it installs a SIGCHLD handler in the test
file child process, which will trigger when the i3 subprocess dies.
4. (For completeness: i3test.pm defines an END block where it unsets the
previous SIGCHLD handler before it kills the subprocesses.)
With this commit, when i3 segfaults, the output will look like this:
Writing logfile to 'testsuite-2022-09-10-21-14-46-4.20-103-gb242bceb/complete-run.log'...
[:100] /home/michael/i3/testcases/t/167-workspace_layout.t: BAILOUT
completed 0 of 1 tests
test /home/michael/i3/testcases/t/167-workspace_layout.t bailed out:
could not kill i3: No such process
fixes https://github.com/i3/i3/issues/4437
When an error is encountered such as "The configured command for this shortcut
could not be run successfully", the "show errors" button on i3-nagbar doesn't
work if $PAGER is less, and $LESS contains either the -E or -F flag (the
window pops up, but immediately disappears).
Strip these flags from the LESS environment variable before invoking $pager.
Fixes#2643
Inner drop region behaves like move to mark.
The outer region is close to the edge (currently 30px from the edge).
This will place the container as a sibling in the given direction within
the parent container. If the move direction goes against the orientation
of the parent container, tree_move() is called.
Contributors:
Co-authored-by: Orestis Floros <orestisflo@gmail.com>
See #3085
- Inner drop region behaves like move to mark
- Handle workspaces
- Fix crash when target closes
- Initiate tiling drag from titlebar
- Hide indicator until container is dragged outside of original position
- Calculate outer_threshold using percentages instead of fixed pixel
values
- Emit 'move' event properly
- Don't focus previously unfocused containers
- Use tree_split() on different orientation
- Fix redundant split containers
- DT_PARENT
- Readability & optimizations
- Limit parent threshold by render_deco_height()
- Tests
- Fullscreen container handling
- Initiate drag from title bar
- Fix issue of EnterNotify events still triggering after drag_callback
is called
- Include decorations for drop target calculation
Co-authored-by: Michael Forster <email@michael-forster.de>
See #2178
- Original implementation of tiling drag + indicator window
> A container can be dragged by the title bar to one of the four sides
> of another container. That container will then be split either
> horizontally or vertically.
Co-authored-by: Tony Crisci <tony@dubstepdish.com>
See #2653
- Original implementation of outer/inner drop region indicator:
> There are two drop regions per direction.
>
> The inner region is closer to the center of the window. Dropping on
> this region will split the target container and put the container
> within the split at the given direction beside the target container.
>
> The outer region is close to the edge (currently 30px from the edge).
> This will place the container as a sibling in the given direction within
> the parent container.
>
> Dropping into the outer region moves the con beside the target. If the
> move direction goes against the orientation of the parent container, the
> con moves out of the row.
- Fix crash: Ignore containers without a managed window (eg i3bar)
Redraw split container parents when swapping child containers
Split container parents should be redrawn when swapping child containers so they show the correct window ordering (note without this higher level split parent container titles will only update when changing layout or moving child cons in/out.
Remove end token from BINDCOMMAND
fixesi3/i3#5000: bindsym command cannot be empty, because NULL string
causes i3 to segfault when copied in configure_binding()
The issue at [0] was opened and I just took a stab at it. I have no
prior experience with pcre and pcre2, but using [1,2] I hacked together
something that seems to work. Next, Michael told me to turn that
patch/hack into a PR, so here we are.
The dependency in meson.build now uses version:'>=10', but this is more
a random guess than actual knowledge.
There was a while loop in regex_new() that dealt with an error when pcre
was not compiled with UTF-8 support. This loop uses a magic constant of
32 for the error code. I just dropped this loop, because I was just
writing a hack and did not intend to turn this into a PR. Also, a quick "grep
32 /usr/include/pcre.h" does not find anything useful, so... *shrug*
pcre_study() was removed without replacement, so the corresponding code
is also simply removed.
Testing done: The test suite passes for me. YMMV.
[0]: https://github.com/i3/i3/issues/4682
[1]: https://www.pcre.org/current/doc/html/pcre2api.html
[2]: https://www.pcre.org/current/doc/html/pcre2demo.html
Signed-off-by: Uli Schlachter <psychon@znc.in>
Fixes: https://github.com/i3/i3/issues/4682
This way, if the user has provided a valid, existing output in the list
of outputs, the focus & move workspace to output commands will not
report a misleading failure.
Side-effect is that the command code will try to execute a no-op e.g. by
moving the workspace to the output it already is on. But that's what the
user is actually requesting in this case and it shouldn't be a problem.
Fixes#4691
Other approaches would be:
- Slow/fast pointer technique.
- Using a set/associative map to save 'seen' nodes. i3 does not have
such data structure.
Counting the total amount of windows is the simpler to implement.
I've also extracted the logic in a function and re-used it in render.c.
Fixes#4404
Benefits:
- Faster feedback in case of error
- More checks run in parallel
- Removes stuff from Dockerfiles
- Uses newest available clang-format (in ubuntu repos)
Fixes#3518
This fix avoids the issue of consuming our own warp events by never
calling warp on the wrong container.
Tried to add a test but it also succeeds with version before patch,
see #4604 for discussion
Co-Authored-By: Orestis <orestisflo@gmail.com>
Imagine you are a happy i3 user and want to also write patches for i3.
You use "Xephyr :1" to get another X11 server and then start your newly
build i3 in it with "DISPLAY=:1 ./i3". You test your changes and
everything seems fine. You are happy. Later that day, you try to log
out, but the $mod+Shift+e key binding from the default config no longer
works. i3-msg cannot connect to the IPC socket because "No such file or
directory". What is going on?
The problem boils down to $I3SOCK having something like two meanings.
When i3 starts, it sets the environment variable $I3SOCK to the path of
its IPC socket. That way, any process started from i3 inherits this and
i3-msg knows how to talk to i3. However, when this variable is already
set when i3 starts, then i3 will replace the existing socket. Thus, in
the earlier experiments, the "separate i3" that was used for
experimenting stole the "main i3"'s socket and replaced it with its own.
When it exited, it deleted that socket.
This commit adds half a work around to this problem: When creating the
IPC socket, i3 will now first try to connect() to the socket. If this
succeeds, it will complain and refuse to use this socket. If the
connect() call fails, it will proceed as usual and create the socket.
Note that trying to connect() to a socket that no process listens on
will fail. Thus, this new code only really "triggers" when some process
is actively listening on this socket and accepting connections.
Example output for when the socket is already in use:
$ I3SOCK=/tmp/sdfdsf DISPLAY=:2 ./i3
31.10.2021 17:03:55 - [libi3] ERROR: Refusing to create UNIX socket at /tmp/sdfdsf: Socket is already in use
31.10.2021 17:03:55 - ERROR: Could not create the IPC socket, IPC disabled
This commit sadly only provides part of the solution. i3 will still
delete the socket when shutting down, even if it failed to create the
IPC socket. Thus, the ipc socket will still break, but now only later.
This will be fixed separately.
First-step-towards-fixing: https://github.com/i3/i3/issues/4381
Signed-off-by: Uli Schlachter <psychon@znc.in>
man.th.title.max.length defaults to 20 which leads to a broken .TH line
for i3-migrate-config-to-v4.1:
.TH "I3\-MIGRATE\-CONFIG\" "1" "02/01/2021" "i3 4\&.19\&.1" "i3 Manual"
This change was (basically) suggested by @orestisfl in
https://github.com/i3/i3/pull/4638#issuecomment-958093518
Testing done:
$ I3SOCK=/dev/null DISPLAY=:2 LC_ALL=C build/i3
bind(): Address already in use
i3: Could not create the IPC socket: /dev/null
Signed-off-by: Uli Schlachter <psychon@znc.in>
man.th.title.max.length defaults to 20 which leads to a broken .TH line
for i3-migrate-config-to-v4.1:
.TH "I3\-MIGRATE\-CONFIG\" "1" "02/01/2021" "i3 4\&.19\&.1" "i3 Manual"
This is required when e.g. mpv is installed in the NixOS global system
environment *and* in the user environment.
Standalone reproducer:
mkdir -p test1/share/applications test2/share
ln -svf /usr/share/applications/i3.desktop test1/share/applications
ln -svf $PWD/test1/share/applications test2/share
export XDG_DATA_DIRS='test1/share:test2/share'
i3-dmenu-desktop
fixes#4522
Currently, i3 only logs FocusIn events. Thus, a debug log tells us when
some window gets the focus. However, we don't know when it loses the
focus. This commit remedies this by adding some log messages for this.
Since I had no idea what to log, this just logs all the fields from the
event plus tries to find a name for the window.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Idea-in-context-of: https://github.com/i3/i3/issues/4532
We do this by adding to included_files as i3 processes the configs.
This should allow for easy debugging, without having to change how i3 processes
config files.
related to #4192
When "something goes wrong" in cairo-land, the corresponding cairo
object goes into an error state. These errors are sticky. Thus, it is
enough to check for errors before destroying the context.
This commit adds a check in draw_util_surface_free() to check the cairo
context's status and print a log message if anything is wrong.
The idea here is to help debugging drawing issues. Instead of "nothing
visible", the corresponding log message hopefully helps debugging.
This code would have saved me lots of time in figuring out why my pull
request #4379 did not work.
Signed-off-by: Uli Schlachter <psychon@znc.in>
When adding/removing a monitor, the outputs are likely to be modified.
Send an IPC event "output", like when there is a screen configuration
change.
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Fixes#4464.
Inspired by changes from #4453 but I didn't end up using the original
code.
For ALIGN_LEFT and ALIGN_CENTER icon offset is calculated first and then
title offset is based on that. For ALIGN_RIGHT title offset is
calculated first but we make sure that the icon fits in the window.
Additionally, icons will now hide if there is not enough space to render
them + their padding. Realistically, this won't happen in normal
usecases.
Effectively, icons have higher precedence over text: draw_util_text will
hide text when it exceeds the max width and the code takes this into
consideration. Icons will only hide when they can't fit at all, not in
order to assure that the text can be displayed fully.
This is useful if we want to be able to start some services depending
on i3, notably some script using the socket or third-party bars like
polybar. To make use of this change, user is expected to use the
following stanza:
```
[Unit]
Description=i3 window manager
PartOf=graphical-session.target
[Service]
Type=notify
ExecStart=/usr/bin/i3
ExecStopPost=/bin/systemctl --user stop graphical-session.target
Restart=on-failure
```
Something similar is already possible using socket activation. For
example, we could use:
```
[Unit]
Description=i3 window manager socket
PartOf=graphical-session.target
[Socket]
ListenStream=%t/i3.sock
ExecStartPost=/bin/systemctl --user set-environment I3SOCK=%t/i3.sock
```
And other units could `Requires=i3.socket`. Unfortunately, not
everything is using I3SOCK. Notably, `i3 --get-socketpath` does not
and that's what i3ipcpp is doing. An alternative would be to patch `i3
--get-socketpath` to use I3SOCK if present, however, this may be a bit
risky. Should we check the environment variable first or the root
attribute?
Another alternative not requiring any modification is to have a
dedicated `i3-session.target`:
```
[Unit]
Description=i3 session
BindsTo=graphical-session.target
Wants=wallpaper.service
Wants=wallpaper.timer
Wants=polybar.service
Wants=i3-companion.service
```
And trigger it from i3:
```
exec_always --no-startup-id systemctl --user start --no-block i3-session.target
```
The proposed change being quite small, it seems harmless and
low-maintenance.
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Commands with more than 10 words would result in i3 crashing. The root
cause is that the stack which holds arguments with identifiers is
only 10 big, but generate-command-parser.pl was giving every word an
identifier of "".
This criterion matches all open windows, as a more readable (and
correct) version of the 'class=".*"' criterion (more correct because
it'll also match windows which don't have WM_CLASS set yet).
This feature defaults to off, and can be turned on for individual windows,
or (with for_window) for all new windows. See the userguide change.
This commit is partially based on work by:
• Marius Muja
• mickael9
• Esteve Varela Colominas
• Bernardo Menicagli
The implementation uses wordexp(3) just like sway:
https://github.com/i3/i3/issues/1197#issuecomment-226844106
Thanks to jajm for their implementation at
bb55709d0a
This required refactoring the config parser to be re-entrant
(no more global state) and to return an error instead of dying.
In case a file cannot be opened, i3 reports an error but proceeds with the
remaining configuration.
Key bindings can be overwritten or removed using the new --remove flag of the
bindsym/bindcode directive.
All files that were successfully included are displayed in i3 --moreversion.
One caveat is i3 config file variable expansion, see the note in the userguide.
fixes#4192
This helps write correct descriptions of the JSON schema for strongly
typed languages that support deserializing to native types (and
require a different type for null).
These seemed to be inconsistently specified.
Particularly, the "SYNC" message payload was not described anywhere.
Even when the payload is empty, it is helpful to specify that
explicitly, as it prevents the reader from having to guess whether if
it's really empty, or otherwise somehow implicitly obvious.
The "Reply format" section is now "Messages and replies", and covers
both the reply format and the format of sent messages.
- Make sure to place the description of the packet before the
description of the payload.
- Describe the relationship of messages and replies.
- Add note on pipelining.
xcb_flush() flushes xcb's output buffer. Thus, after this call, all
previous requests are surely written to the connection with the X11
server.
xcb_aux_sync() synchronises with the X11 server. It makes sure all
previous requests were sent to the X11 server and already processed. It
does this via free(xcb_get_input_focus_reply(xcb_get_input_focus())): It
sends a request and waits for its reply. It is guaranteed that the X11
server processes requests in-order.
This means that the sequence xcb_flush(); xcb_aux_sync() first writes
whatever is in the output buffer and then does another write for the
four bytes of the GetInputFocus request from xcb_aux_sync().
Put differently: xcb_flush(); xcb_aux_sync() doesn't do anything more
than just xcb_aux_sync(). In fact, it has slightly more overhead for the
same result.
Thus, this commit drops all calls to xcb_flush() immediately after
xcb_aux_sync().
Signed-off-by: Uli Schlachter <psychon@znc.in>
"Set" the wallpaper during startup only sometimes
Since commit 4f5e0e7, i3 would take a screenshot and set that as the
background pixmap of the root window during startup. This is the easy
part of setting a proper X11 wallpaper.
The code in question was added because something either set the
background pixmap of the root window to NONE or the X11 server was
started with "-background none". This is apparently done by default by
e.g. gdm to avoid some flickering while the X11 server starts up.
This commit makes this code conditional: Only when no wallpaper is
detected is a screenshot taken.
Since I could not find any way to query the background of a window, a
more direct approach is taken to detect this situation: First, we find
some part of the root window that is not currently covered. Then we open
a white window there, close it again and grab a screenshot. If a
wallpaper is set, the X11 server will draw this wallpaper after the
window is closed and something else will be visible in the screenshot.
However, the wallpaper could have a white pixel at the tested position.
Thus, this procedure is repeated with a black window.
Only when this procedure produces two different pixel values is a
screenshot taken and set as the wallpaper.
Fixes: https://github.com/i3/i3/issues/4371
Fixes: https://github.com/i3/i3/issues/2869
Signed-off-by: Uli Schlachter <psychon@znc.in>
I was confused by the previous state of the docs since I imagined that
there is still a race possible. Thus, the images are updated to
explicitly include the IPC reply from i3 (since that is an important
synchronisation component). I also tried to clarify some of the text.
Fixes: https://github.com/i3/i3/issues/4365
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commit makes libxcb prefetch some information that will be needed
later anyway. This avoids some round-trips to the X11 server since the
information is already present when needed.
Signed-off-by: Uli Schlachter <psychon@znc.in>
i3 actually manages to have two different cairo surfaces referring to
the same drawable. One comes from the code in draw_util. The second is
temporarily created while rendering text via draw_text(). No idea how
well cairo handles this case.
This commit instead changes the code to pass the already existing cairo
surface from the caller through.
This might or might not fix https://github.com/i3/i3/pull/4357. My
thinking here is that cairo now knows the actual size of the drawable
and thus does not clip the drawing to a smaller size.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Fix#4261
The previous method was modifying the same list it was iterating upon
causing an erronous iteration and thus not every workspace got assigned
back to were they should (only the first one).
got_output_reply() requests this information anyway and if it is
received before the output reply, the information will be erased by
get_output_reply().
This commit makes it so that when clicking on a tab for the first time,
its inactive-focused child is focused. This matches i3 behavior when
scrolling on tabs.
A second click on the tab titlebar focuses the tab container itself.
Subsequent clicks cycle between these two states.
Closes#4225.
Fix#4261
The previous method was modifying the same list it was iterating upon
causing an erronous iteration and thus not every workspace got assigned
back to were they should (only the first one).
* Upgrade logo's inkscape SVG attributes
Inscape changed their attribute handling with version 1.0, this commit
is dedicated to this change
* Update logo to remove small bulge
When going through the `binding_workspace_names` to prioritize
user-specified names, we only check if the workspace exists, not the
workspace number. If the user specified a `bindsym … workspace number X`
directive, then it is appended in `binding_workspace_names` and a
workspace is created using that number even though from the POV of a
user that uses numbers to change workspaces, that workspace already
exists.
In similar code here:
1d9160f2d2/src/workspace.c (L997)
we do the check.
Fixes#4238
We never did (and still do not) guarantee any order in which terminal emulators
are tried. Quoting from the i3-sensible-terminal man page:
> Please don’t complain about the order: If the user has any preference, they
> will have $TERMINAL set or modified their i3 configuration file.
This commit moves mate-terminal to the beginning of the list, which is
considered the most accessible terminal emulator among blind users.
fixes https://github.com/i3/i3/issues/4256
Currently i3bar click events provide x and y coordinates relative to all monitors.
I've added coordinates relative to the current output.
+-----------+-----------+
| | i3bar |
| +-----------+
| HDMI-0 | DP-0 |
| 1920x1080 | 2560x1080 |
+-----------+-----------+
When you click in the top right corner of the DP-0,
i3bar will provide something like this:
{
"x": 4480,
"y": 10,
"output_x": 2560,
"output_y": 10,
}
This is useful for creating a rofi menu or something else.
rofi -show run -location 1 -xoffset ${I3_OUTPUT_X} -yoffset ${I3_OUTPUT_Y}
The bug here is that workspace assignments with numbers are triggered
even if a named argument matches later on.
With this commit, get_assigned_output is called to correctly iterate the
workspace assignments.
Fixes#4021
I find the new loop more straightforward and easy to understand.
Old loop used to be:
foreach assignment:
foreach assignment2:
// find if this is the first valid output in this assignment
foreach workspace:
// find matching by assignment name
if workspace:
move workspace to output
New loop is:
foreach workspace:
foreach assignment:
if workspace is assigned to this output:
move workspace to output
With this, workspace assignments triggered by numbers during output
changes should be handled correctly.
Fixes#3685
This changes LICENSE text to the standard BSD-3-Clause text.
The wording is almost identical, with only "copyright holders
and contributors" replacing "Michael Stapelberg and contributors"
in the license text.
The `*_free_*` calls in this branch:
51b0583578/i3bar/src/xcb.c (L1854)
are never called when we remove the output from the tailq during a
refresh.
Fixes#4123
The `*_free_*` calls in this branch:
51b0583578/i3bar/src/xcb.c (L1854)
are never called when we remove the output from the tailq during a
refresh.
Fixes#4123
Otherwise, each time we start a nagbar, a cleanup handler is created.
However, each of these handlers tries to kill the same process (->data
is a pointer to config_error_nagbar_pid / command_error_nagbar_pid).
With this commit, both potential nagbar processes are killed once.
Other changes in nagbar_exited:
- Remove ERROR from ELOG as it shows up as "ERROR: ERROR:"
- Make sure to reset the PID even when the process did not exit
normally.
- Use ELOG when exitcode != 0
- Remove the not found error: if nagbar is not in $PATH, exec_i3_utility
prints an error as well.
For the record, I also implemented a more complicated approach with a
new watcher data structure:
bd3aaf3a33
While writing the commit message, it occurred to me to compare
watcher->pid with *watcher->data, which fixes the problems mentioned in
that patch.
Fixes#4104
…instead of building a release tarball over and over again.
This has become an issue as meson insists on running tests before creating a
release tarball (which is a good policy).
related to #4086
Motivation:
• faster builds (on an Intel Core i9-9900K):
( ../configure --disable-sanitizers && make -j8; )
19,47s user 2,78s system 395% cpu 5,632 total
( meson .. -Dmans=true -Ddocs=true -Dprefix=/usr && ninja; )
38,67s user 3,73s system 1095% cpu 3,871 total
• more approachable build system configuration in the
python-esque meson domain specific language instead of
the autotools m4 macro language
• built-in language server support thanks to ninja:
the required compile_commands.json is built automatically
and only needs to be linked from the source dir, e.g.:
ln -s build/compile_commands.json .
Changes:
• the embedded vcs version info format changed from e.g.
4.18-282-gabe46f69 (2020-05-16, branch "next")
to:
4.18-282-gabe46f69
I think it’s better to lose a little bit of detail for
the gained cleanliness of using meson’s vcs_tag()
• Drop unused xcb-event dependency.
• We can no longer enable sanitizers and debug options
based on whether we are in a release or non-release build,
because our new version logic runs at ninja build time,
not at meson configure time.
The new behavior is probably for the better in terms of
what people expect, and we can make the CI use address sanitizer
explicitly to ensure it is still exercised.
• We lose the AX_EXTEND_SRCDIR behavior, i.e. including the
path component of the parent of the source dir in all paths.
This was a trick we used for easier debugging, so that stack
traces would contain e.g. ../i3-4.18.1/src/main.c, instead of
just src/main.c.
The other mechanism (_i3_version symbol) that we have for including
the version number in the “backtrace full” (but not merely
“backtrace”) output of gdb still works.
• Release tarballs now use tar.xz. Why not.
Migration plan
This commit adds the meson build files to the tree, but does not remove
autotools yet. For the development phase, we will keep both build systems
functional (and built on travis).
Then, just before the i3 v4.19 release, we will remove autotools from the tree
and the release tarball will require meson to compile.
This way, we incentivize maintainers to change, while also offering them an easy
way out (if desired) by reverting the most recent commit. In practice, switching
a distribution package from autotools to meson should only be a few line change,
easier than applying the provided patch :). Take a look at the debian/ changes
in this commit for an example.
meson is broadly available everywhere that i3 is available: Both xorg-server and
systemd gained meson build files in 2017, so we can follow suit:
https://anholt.livejournal.com/52574.htmlhttps://in.waw.pl/~zbyszek/blog/systemd-meson.html
How do I?
For producing a coverage report, enable the b_coverage meson base option
and run ninja coverage-html:
% cd build
% meson .. -Db_coverage=true
% ninja
% ninja test
% ninja coverage-html
See also https://mesonbuild.com/howtox.html#producing-a-coverage-report
For using the address sanitizer, memory sanitizer or undefined behavior
sanitizer, use the b_sanitize meson base option:
% cd build
% meson .. -Db_sanitize=address
% ninja
See also https://mesonbuild.com/Builtin-options.html#base-options
related to #4086
meson only supports the top level (no subdirs), so this makes the transition
easier.
For this to work with autotools, we need to *disable* the subdir-objects option,
that autotools wants us to enable for forward-compatibility.
This results in a bunch of warnings at autoreconf-time, but we don’t care, given
that we intend to switch away from autotools. Both build systems working next to
each other (as best as they can) is more important.
related to #4086
This works better with meson, where .h files can be declared as being part of an
executable easily, but I couldn’t find a way to declare
e.g. include/atoms.xmacro as a dependency.
related to #4086
This is another regression from #4014: multiple arrows in a row mean
optional values. Re-introduce new states to force matching & proper
parser errors.
- Split cmd_bar into 2 functions, improving errors and reducing strcmps
- Only update barconfig when something has changed
- Only update barconfig for the specific bar that has changed
Fixes#3958
- Includes updated bigpicture.png from dump-asy.pl script
- The X11 root window is not a container
- Adds some extra information
bigpicture.png is created by converting the .asy to an .eps with `asy
bigpicture .eps` and then using the following gs command:
gs -dSAFER -dBATCH -dNOPAUSE -dEPSCrop -r600 -sDEVICE=pngalpha -sOutputFile=bigpicture.png bigpicture.eps
Instead of sorting alphanumerically, use a more opinionated order,
listing more "important" files towards the beginning.
Info in this section was a bit outdated. First of all, i3 contains many
more files that were not mentioned. Instead of trying to include
everything, I deleted some files with very obvious descriptions. We can
always re-add something if we want to add more details to it.
This still had some leftovers from the patch era. Since git and
specifically GitHub-like developing is much more mainstream now we don't
need to link introductions or even mention the idea of "patching".
The deleted "them" was referencing an old sentence referring to patches,
generated by the git cli. As emailing patches is not common at all for
GitHub repos, I removed the sentence altogether.
Also simplifies the 'branches' subsection a bit. Asking people to verify
their patch on master seems too much preliminary work and I doubt that
anyone does it anyway.
The previous fix when using _DEPENDENCIES was wrong because that
dependency is only created for the final executable. However, the build
fails when building the object file. The manual explicitly mentions that
using _DEPENDENCIES is wrong for source files:
> In rare cases you may need to add other kinds of files such as linker
> scripts, but listing a source file in _DEPENDENCIES is wrong. If some
> source file needs to be built before all the components of a program
> are built, consider using the BUILT_SOURCES variable instead (see
> Sources).
https://www.gnu.org/software/automake/manual/automake.html#Linking
Instead, using BUILT_SOURCES works, as mentioned in the manual.
https://www.gnu.org/software/automake/manual/automake.html#Sources
I have also removed the dependencies from i3_SOURCES since AFAIK
dependencies to header files don't do anything. I have verified that
modifying the header correctly re-triggers the build for i3 &
i3-config-wizard.
> Header files listed in a _SOURCES definition will be included in the
> distribution but otherwise ignored. In case it isn’t obvious, you
> should not include the header file generated by configure in a
> _SOURCES variable; this file should not be distributed. Lex (.l) and
> Yacc (.y) files can also be listed; see Yacc and Lex.
https://www.gnu.org/software/automake/manual/automake.html#Program-Sources
An alternative instead of BUILT_SOURCES that should also work in our
case is found in this section:
https://www.gnu.org/software/automake/manual/automake.html#Built-Sources-Example
see "Recording Dependencies manually". The syntax would be:
foo.$(OBJEXT): $(config_parser_SOURCES) $(command_parser_SOURCES)
The benefit of this over BUILT_SOURCES is that it will work for targets
other than 'all', 'check' and 'install'. However, since we don't really
have such targets we don't need to do this right now.
Tested extensively using this script:
#!/bin/bash
set -x
autoreconf -fi
while mkdir build && cd build && ../configure && make -j; do
cd ..
rm -rf build
done
Fixes#3670
i3-config-wizard uses libi3.a as part of its build process. When
parallel build is enabled, build of i3-config-wizard may start before
libi3.a finished building. Fix this by adding dependency on libi3.a
Fixes: #4020
* Add RELEASE-NOTES template for next
The placeholder items are useful instead of having to find the •
character for every new release.
Closes#4040
* Remove leftover bugfix release notes from tree
Fixes#4039
Crash with docking clients where the floating field is set even though
floating_enable refuses to make them floating.
See issue for example with logs.
Following the reproduction instructions from
https://github.com/i3/i3/issues/3242#issuecomment-436175346
For me, #3242 happened when the following sequence executed:
1. Fullscreening window correctly calls `stop_child()` in
6e24e2ad6f/i3bar/src/xcb.c (L685)
2. Xrandr change, `reconfig_windows()` is called and `output->visible` is
set to `true` in this line:
6e24e2ad6f/i3bar/src/xcb.c (L1791)
3. When the window's fullscreen is disabled,
`handle_visibility_notify()` returns in this line:
6e24e2ad6f/i3bar/src/xcb.c (L677)
because previously `output->visible` was set to `true`
To fix this, I call `cont_child()` more leniently since it is a no-op
when the child is not stopped.
Fixes#3242Closes#3761
Previously, i3 used to clean the parent pixmap only if the first child
has a titlebar.
This worked well for case `V[a b]` when both `a` and `b` have titlebars
(clearing is required), or both haven't (clearing is not required).
However, in case if `a` has no titlebar, but `b` has, this could lead
to graphical glitches.
This commit rearranges the order of conditions to make sure that the
parent pixmap is cleared regardless of the border style of the first
child.
This is similar to #3820 but does not use qsort but an insertion sort in
con_attach.
Since each bar block automatically gets its own incremental bar id,
bards end up being sorted according to their definition order in the
config file.
For i3bar, the WM_CLASS is modified to include an instance name which
depends on the bar_id. This could be useful for other reason, e.g. users
targeting a specific bar instance.
Fixes#3491
Probably fixes various related issues:
Closes#2276Closes#2459Closes#2936Closes#3766
Tested using
bindsym $mod+Shift+i exec xrandr --output DVI-D-0 --mode 1920x1080 --pos 0x0 --rotate normal --output DVI-I-1 --off, restart
The core issue here is that the JSON read during a restart might contain
invalid outputs when the new process is done reading it.
The default `tiling` and `floating` behavior is preserved and matches
both cases.
Adds a new handler to `remanage_window` on A_I3_FLOATING_WINDOW change.
Mainly in order to `run_assignments`, this makes `for_window [floating]`
directives to work for windows which where initially opened as tiling.
Now, when floating is enabled, `for_window` will trigger correctly. Same
applies to `for_window [tiling]`.
The obvious solution of `run_assignments` after
`floating_{enable,disable}` doesn't work because `run_assignments`
modifies the parser state in src/assignments.c:51.
Fixes#3588
Co-Authored-By: Michael Stapelberg <michael@stapelberg.de>
Another option is to modify resize_find_tiling_participants but this
would also affect resizing of tiling containers in scripts, so I chose
to make this change specific to resizing with the mouse.
Follow-up after #3983Fixes#3980
Following the reproduction instructions from
https://github.com/i3/i3/issues/3242#issuecomment-436175346
For me, #3242 happened when the following sequence executed:
1. Fullscreening window correctly calls `stop_child()` in
6e24e2ad6f/i3bar/src/xcb.c (L685)
2. Xrandr change, `reconfig_windows()` is called and `output->visible` is
set to `true` in this line:
6e24e2ad6f/i3bar/src/xcb.c (L1791)
3. When the window's fullscreen is disabled,
`handle_visibility_notify()` returns in this line:
6e24e2ad6f/i3bar/src/xcb.c (L677)
because previously `output->visible` was set to `true`
To fix this, I call `cont_child()` more leniently since it is a no-op
when the child is not stopped.
Fixes#3242Closes#3761
Some property handlers trying to fetch property again if `prop == NULL`.
This is redundant since these properties are either fetched by
property_notify() just before or deleted.
Before this commit, large workspace numbers treated oddly:
$ i3-msg 'rename workspace to 1234567890'
# displayed in i3bar as `0`
$ i3-msg 'rename workspace to 4294967200'
$ i3-msg -t get_workspaces | jq '.[]|select(.focused).num'
-96 # int32_t overflow
$ i3-msg 'rename workspace to 99999999999999999999'
$ i3-msg -t get_workspaces | jq '.[]|select(.focused).num'
-1 # treated as unnumbered
This commit puts a consistent limit on workspace numbers. Now
workspaces with numbers beyond INT32_MAX are treated as unnumbered.
* clang-format: bring back ForeachMacros
ForeachMacros was disabled in 4211274fcd
due to the breakage of include/queue.h. The currently used version,
clang-format-6.0 doesn't break it.
* Add curly braces
Co-authored-by: Orestis Floros <orestisflo@gmail.com>
The previously used AC_SEARCH_LIBS uses AC_LANG_CALL, which is discouraged
because it intentionally violates the C type system: it has no way of specifying
function parameters, so it does not include the required headers to suppress
type warnings:
https://www.gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.69/html_node/Generating-Sources.html
The new code does what AC_SEARCH_LIBS does, but uses AC_LANG_PROGRAM instead of
AC_LANG_CALL. It explicitly includes iconv.h and calls iconv_open with the
correct number and type of arguments.
This fixes compilation on systems where libiconv’s iconv.h is discovered first,
but glibc also provides iconv. Previously, this would result in configure
discovering glibc’s iconv, and make failing to compile because -liconv wasn’t
specified, but iconv.h pulled in libiconv.
We currently do not evaluate match criteria for the exec command
since generally executing the same command multiple times is
unlikely to make sense.
However, it does make sense when the match is empty and this should
prevent the command from running, which currently does not happen.
For consisteny we execute the command as many times as there are
matched criteria, but print a warning if it matches more than one
container.
fixes#3903
When unmanaging a window we need to reparent it back to the root
window. With this patch we do so at the current position of the
container such that we don't throw away the geometry position.
This fixes cases where clients withdraw a window and reparent it
later on, expecting to keep the same geometry (in particular dock
clients) but then end up on a wrong output.
fixes#3819
I had a dilemma about the behaviour here:
1. Prohibit focus leaving the workspace in any case unless if
get_tree_next's initial argument is a workspace. This is what this
commit does (also i3-cycle).
2. Leave the workspace if no warp is possible (eg workspace with single
container or `focus right` with `V[a b c*]`).
Fixes#2180
- Makes `tree_next` not recursive.
- Adds `focus next|prev [sibling]` command. See (1.) and (2.) in
https://github.com/i3/i3/issues/2587#issuecomment-378505551 (Issue also
requests move command, not implemented here).
- Directional focus command now supports command criteria.
Wrapping is not implemented inside a floating container. This was also
true before the refactor so I am not changing it here.
This has changed after #3787.
The packed attribute was added in
75aac5bc02 for _NET_WORKAREA. However,
eec80838ab removed _NET_WORKAREA support.
I did some quick greping for `memcpy.+Rect` and didn't find any similar
code that could theoretically lead to problems.
This commit should fix "move con to parent" trick (see below) in the
case when con->parent->parent is a workspace.
The trick:
mark _a, focus parent, focus parent, mark _b,
[con_mark=_a] move window to mark _b, [con_mark=_a] focus
The trick got broken in commit 626af81232
in order to fix an i3 crash (#2003). Reverting said commit fixes the
trick. The crash is caused by the fact that empty workspace isn't
considered a split (checked in src/con.c:1324), so the moved window ends
up as a sibling of the target workspace, not as its child.
Move drag_pointer() and related definitions from floating.c to new file
drag_pointer.c since it's applicable not only to floating windows but
also to resizing of tiled windows.
Some apps including XTerm start with a WM_CLIENT_LEADER property
containing their own window ID. Before this commit, i3 tried to center
such windows onto itself and did it wrong since
`leader->rect == {0,0,0,0}` at this moment.
The first affected commit is 128122e766,
however, before it such windows already was misplaced, but got sanitized
afterward [1].
[1]: 8a3ef3a81b/src/floating.c (L329-L335)Fixes#3606
Fixes#3785 -- the issue where the Travis build failed because of gcc's
-Werror=address-of-packed-member.
Adds an equality function to avoid relying on memcmp().
This is strictly better: if the configured name does not match the current name,
the correct workspace will still be used.
When creating a new workspace, the configured name is still used.
This fixes the case where moving a container to a scratchpad hidden
container via a mark would cause the container to be tiling on the
__i3_scratch workspace. This still moves the container to the
__i3_scratch workspace, but properly adds it to the scratchpad so that
it becomes usable instead of requiring criteria to regain access to.
This change will make things strictly better for new users (without an existing
configuration file) and has no effect on existing users.
The tools should be fairly uncontentious, I hope, especially as they only serve
as a starting point anyway: users can quickly delete what they don’t want, or
change it into what they prefer.
But having something is strictly better than having nothing :)
We make some space in the config file by removing the old paragraph about pixel
fonts, which seems rather outdated and irrelevant to me.
This is strictly better: if the configured name does not match the current name,
the correct workspace will still be used.
When creating a new workspace, the configured name is still used.
This is achieved by retaining the IPC connection which is sending the restart
command across the restart.
This is the cleaner fix for https://github.com/i3/go-i3/issues/3fixes#3565
This change introduces support for four new properties on the i3bar
protocol, namely "border_top", "border_right", "border_bottom"
and "border_left".
If a block is drawn with a border, these values define the width of
the corresponding edge in pixels. They all default to 1 if not
specified to preserve compatibility.
fixes#3722
We introduce a --transparency flag for i3bar in order to enable a mode which
supports the use of RGBA colors.
An important constraint here is that tray icons will always have
a fully transparent background.
fixes#3723
The testcase is changed because it was actually incorrect. Easy to
verify because:
> _NET_CURRENT_DESKTOP
> …
> The index of the current desktop. This is always an integer between 0
> and _NET_NUMBER_OF_DESKTOPS - 1.
Fixes#3696.
Also updates the viewports.
Finally, fixes an issue with _NET_CURRENT_DESKTOP not being updated
after a workspace rename. Example:
- workspaces 1, 2, 3
- rename workspace 1 to 5
- All workspaces changed their index but _NET_CURRENT_DESKTOP was not
updated
- manage_window: log the window in the start of the function so that the
reader knows what the rest of the messages refer to, even if the
function exits prematurely.
- con_is_floating: Message is spammy
c2a1b6e9 was a bit overzealous, other actions should be executed if the
button was pressed after the workspace buttons but before the
statusline.
Also, should we allow other actions everywhere in the bar if click
events are disabled by the child?
- Having both parse_configuration and parse_file is excessive now
- We detect if we are parsing only by checking if conn is NULL, not with
use_nagbar
- font.pattern needs to be set to NULL because it is freed in
free_font()
Fixes#3660
Also fixes an issue where action would be called if the button press was
on a separator. For example, if a user scrolled on a separator, the
workspace would change.
Applies to --release commands as well.
Closes#3635.
Probably the bug can still happen when a tree_close_internal happens
inside a workspace_show but modifying the code to avoid them seems to
not be worth it.
- The result from con_get_output was always not NULL because
con_get_output asserts so
- get_output_by_name should always be able to get an output from the
corresponding container
- workspace_move_to_output doesn't return bool anymore since it can't
fail
This is a regression from bce088679.
An other way to fix this would be to concatenate strings inside the
strtok loop when an output starts with a double quote but I'd rather
let the parser do the word splitting.
Fixes#3646
This fixes a crash which I could not reproduce in a testcase with reasonable effort, but the user reported the fix works.
Compare with src/x.c:946.
fixes#3554fixes#3645
Fixes#3595
Like the issue mentions:
> instead of the newly created workspace (not referenced by variable
> here) the `"init"` event is fired with the current workspace (`ws`).
Plus, there was another issue where duplicate workspace init events
where being sent because of workspace_get().
304-ipc-workspace-init.t: Subtest "move workspace to output" fails with
current next.
Fixes#3631
No event was being sent here:
2d6e09a66a/src/randr.c (L487)
533-randr15.t: I confirmed that SKIP still works if the xrandr command
fails.
Added test fails with current next.
After 204eefc. Alternative fix:
diff --git a/src/floating.c b/src/floating.c
index f5c61782..6dd79668 100644
--- a/src/floating.c
+++ b/src/floating.c
@@ -954,7 +954,7 @@ bool floating_reposition(Con *con, Rect newrect) {
con->scratchpad_state = SCRATCHPAD_CHANGED;
/* Workspace change will already result in a tree_render. */
- if (!reassigned) {
+ if (!reassigned && workspace_is_visible(con_get_workspace(con))) {
render_con(con);
x_push_node(con);
}
but I don't think that the extra complexity is worth it.
Change in handlers.c because of d2d6d6e0 where the bug also appears.
Fixes#3567
- __lsan_do_leak_check() will terminate the process, so move it to the
end of the function.
- ev_loop_destroy() must be called after ipc_shutdown() because the
latter calls ev_ functions.
Fixes#3599
I was able to reproduce #3579 in Linux by running:
`sudo sysctl net.core.wmem_default=10000`
If a subscription message was too big to be sent at once, it was
possible to break a client by sending a reply to an other message sent
by the client. Eg:
- Write 8192 out of 11612 bytes of a workspace event.
- Blockingly write the reply to a workspace change message.
- Write the rest 3420 bytes of the workspace event.
This commit fixes this by utilizing the ipc queue for all types of
writes.
ipc_receive_message can only be called from a callback started in
ipc_new_client. This callback uses the same file descriptor with the
client also created in ipc_new_client. When the client is deleted, the
read callback is now also stopped. Thus, we can assume that whenever
ipc_receive_message is called, the corresponding client should still
exist.
- ipc_client now contains pointers to both write and read watchers. When
freed, a client will stop both of them.
- IPC_HANDLERs now work with ipc_clients instead of fds.
Fixes#3579.
on_remove_child calls tree_close_internal which calls tree_render and
the tree is in an invalid state if con->parent still points to the old
parent.
Fixes#3556
- __lsan_do_leak_check() will terminate the process, so move it to the
end of the function.
- ev_loop_destroy() must be called after ipc_shutdown() because the
latter calls ev_ functions.
Fixes#3599
I was able to reproduce #3579 in Linux by running:
`sudo sysctl net.core.wmem_default=10000`
If a subscription message was too big to be sent at once, it was
possible to break a client by sending a reply to an other message sent
by the client. Eg:
- Write 8192 out of 11612 bytes of a workspace event.
- Blockingly write the reply to a workspace change message.
- Write the rest 3420 bytes of the workspace event.
This commit fixes this by utilizing the ipc queue for all types of
writes.
ipc_receive_message can only be called from a callback started in
ipc_new_client. This callback uses the same file descriptor with the
client also created in ipc_new_client. When the client is deleted, the
read callback is now also stopped. Thus, we can assume that whenever
ipc_receive_message is called, the corresponding client should still
exist.
- ipc_client now contains pointers to both write and read watchers. When
freed, a client will stop both of them.
- IPC_HANDLERs now work with ipc_clients instead of fds.
Fixes#3579.
errx() already appends \n internally. "\n" in the error message will
result in a blank line after the message. die() is just a wrapper around
errx() so it receives the same treatment.
After 204eefc. Alternative fix:
diff --git a/src/floating.c b/src/floating.c
index f5c61782..6dd79668 100644
--- a/src/floating.c
+++ b/src/floating.c
@@ -954,7 +954,7 @@ bool floating_reposition(Con *con, Rect newrect) {
con->scratchpad_state = SCRATCHPAD_CHANGED;
/* Workspace change will already result in a tree_render. */
- if (!reassigned) {
+ if (!reassigned && workspace_is_visible(con_get_workspace(con))) {
render_con(con);
x_push_node(con);
}
but I don't think that the extra complexity is worth it.
Change in handlers.c because of d2d6d6e0 where the bug also appears.
Fixes#3567
The userguide contained a commented-out section for marks, which
included the line:
> TODO: make i3-input replace %s
The line was added in a26a11c609 (May
2011), at which point i3-input did not have a -F switch. The switch
was added only in 1737a78fcd (September
2011), but the documentation was never updated to enable the
commented-out examples.
- Explicitly document --replace, which was previously only mentioned
in the command syntax.
- Improve wording: "a window can only have one mark" is slightly
misleading because it appears to describe the limitation as a
property of the model, whereas this actually pertains the mark
command.
on_remove_child calls tree_close_internal which calls tree_render and
the tree is in an invalid state if con->parent still points to the old
parent.
Fixes#3556
Using the wrong X11 connection breaks the libev event handling model:
xcb_flush() must be called immediately before handing control to libev.
Before this fix:
1. xcb_prepare_cb would read and flush conn
2. restore_xcb_prepare_cb would read and flush restore_conn,
BUT also inadvertantly call xcb_flush(conn), resulting in new
events being filled into the XCB event queue
3. libev waits for new events
4. after 1 minute, libev times out and the events are processed
Diagnosed using strace on testcases/complete-run.pl.
related to commit 0d8b6714e3
related to #3510
Basic idea: if the window has a shape, set the parent container shape as
the union of the window shape and the shape of the frame borders.
Co-authored-by: Uli Schlachter <psychon@znc.in>
- ICCCM says: > If a base size is not provided, the minimum size is to
be used in its place and vice versa.
i3 didn't obey the "vice versa" part. Min size and base size are both
saved without replacements in window_update_normal_hints,
floating_check_size makes the needed replacements if either was not
provided.
- Aspect ratio is now saved correctly in manage_window because
window_update_normal_hints is called.
- i3 didn't save the aspect ratio if the window conformed the given
aspect ratio range when handle_normal_hints was called. If the window
was resized to a size outside of the given bounds, i3 didn't correct it.
- Aspect ratio now affects only tiling windows, like the rest of the
normal size hints
- The aspect ratio calculation is now done without a loop
A real life example of how these changes affect the workflow:
An mpv window, when playing a video, sets its min == max aspect ratio
during mapping. i3 ignored these hints. When resized, the window's
aspect ratio was not preserved. With this commit, resizing floating mpv
windows will always preserve the aspect ratio.
Previously, it first calculated one of the containers' next percentage, and then subtracted the previous percentage to find the actual change.
Now it directly calculates the change, and subtracts and adds the change to the two affected containers.
Added util function con_rect_size_in_orientation.
Removed px_resize_to_percent; inlined, using con_rect_size_in_orientation.
Also, prematurely return when pixel diff is 0, as no action is necessary.
This is related to [this issue on i3-gaps](https://github.com/Airblader/i3/issues/247).
Example problematic layout:
{
"layout": "splith",
"marks": ["H1"],
"nodes": [
{
"swallows": [
{
"class": "^a$"
}
]
}
]
}
Since the marks were added to the json_node during end_map, the
container that ended up getting the "H1" mark was the child instead of
the parent.
This brings the headline for the configuration files inline with the
recent move to XDG directories.
Signed-off-by: Morten Linderud <morten@linderud.pw>
Ubuntu’s apt started refusing to load package files from unauthenticated
repositories, but the package for which we did that (xcb-xrm) is available in
newer versions of Ubuntu, so I just removed that part altogether.
Apparently this has been broken since April, and nobody noticed :-/
This fixes a regression introduced in 6d983b5. Consider 2 outputs:
fake-0: workspace '1'
fake-1: workspaces '2','3'
Workspace 1 focused, workspace 2 visible.
Open a floating window in 1 and move it to 3. Now, the floating window
appears in workspace 2 and disappears once focus is switched to
that workspace.
Instead of focusing 'old_focus' which might refer to a container in a
different output, we should restore focus by focusing the previously
focused workspace of the output.
Fixes#1329Fixes#3317 (duplicate)
Examples where the tray "disappeared":
- Start without a "tray_output", reload config with "tray_output none",
remove "tray_output none" and reload.
- Start with "tray_output primary" (or "tray_output <output>"), disable
the primary output and then reconnect it.
Fixes#2010
Cached in output_for_tray
While reading the UserGuide, I had to refer to the TL;DR image on top to find the default keybind for "Focus Parent" since it's not mentioned in the text.
This pr fixes it.
mk-build-deps started using the changelog file to get the version number, but a
bug prevents it from falling back correctly to 1.0 if no changelog is
present. This has been fixed upstream in
4b15abd4f0,
but we can just ship the changelog file until that fix lands.
Fixes for undefined behaviour on signed shift
Change literal 1 to unsigned to allow safe bitshift of 31.
Caught by cppcheck.
Make 0xFF unsigned to prevent a left shift into signed bit.
Spotted by @orestisf1993
copy has been used before this point - so it is too late to be concerned
about a NULL pointer now.
This is OK as sstrdup() calls err() on NULL return from the underlying
strdup() call.
Raised by cppcheck.
Controls the window titles alignment in title bars. Possible values are:
- left
- center
- right
Co-authored-by: Orestis Floros <orestisf1993@gmail.com>
- Made title_align a config directive instead of a command. Helps with
some tree_render() issues we had.
- Made title_max_width the same for all 3 cases.
- Modified title offset calculations and added explanations for each
case.
- Append title_padding to mark_width if a mark exists.
Fixes#1750
Benefits are that we don't open a fake container and don't call many
complicated functions that can lead to redraws (x_push_changes calls) as
discussed in #2954.
Fixes#2810:
Windows exchange floating mode & window rects.
Swap will still not work with CT_FLOATING_CONs but this doesn't make
much sense.
Fixes#3280:
The behaviour is not very user friendly but swap behaves exactly as it
should. The rest is a tree_flatten issue. Attached pictures in #2954.
- Use workspace_show that correctly updates _NET_CURRENT_DESKTOP, warps
mouse.
- Use TAILQ_INSERT_TAIL only for focus_head. Focus order is not related
to direction.
- Call con_focus only if con was focused before. See testcase for
directional move with command criteria.
- Correct first call of move_to_output_directed in tree_move which
didn't call ipc_send_window_event("move", con) and
ewmh_update_wm_desktop().
- Don't produce events when the move doesn't happen. Correct
276-ipc-window-move.t as well.
strlen already assumes that the string is NULL-terminated.
Like in https://github.com/i3/i3status/pull/312 but for whatever reason
gcc didn't warn about this here.
If i3-msg is invoked with -t subscribe, it will wait for the first event
matching the given payload, before exiting.
For instance, get the number of the next focused workspace with:
i3-msg -t subscribe '[ "workspace" ]' | jshon -e current -e num
Like inotifywait, the -m flag allows to wait indefinitely for events,
instead of exiting right after receiving the first one.
For example, continuously monitor the names of focused windows with:
i3-msg -t subscribe -m '[ "window" ]' | jq .container.name
i3-msg currently exits right after sending the IPC message if the quiet
flag is set. This means that if an error occurred when issuing a
command, e.g. "i3-msg -q foobar", it gets silently ignored.
What we really want is to just skip printing but still check the reply.
At the same time, explicitly print the reply when we need to, instead of
using an exit label.
For compatiblity reasons, Wine will request iconic state and cannot
ensure that the WM has agreed on it; immediately revert to normal to
avoid being stuck in a paused state.
Now clicks begin at the start of the "actual" block, offsets and
separators don't trigger click events. The width property is now just
the width of the block, including border.
Fixes#3380.
- Add routine that will refocus the expected window on test failure.
Thus, failure on one test will not make others fail.
- Remove some redundant commands, prefer fresh_workspace for screen
changing.
- Kill previous windows between sections if the next section does not
depend on the previous layout.
con_detach and con_attach modify the focus stack.
This will make sure that the currently focused workspace will remain
focused after disabling an output.
This fixes a crash produced with the following config:
# i3 config file (v4)
workspace 1 output $screen1
workspace 2 output $screen2
exec --no-startup-id "i3-msg workspace 1, open && i3-msg workspace 2 && xrandr --output $screen2 --off && xrandr --output $screen1 --auto --output $screen2 --auto --right-of $screen1 "
Which results in:
ERROR: AddressSanitizer: heap-use-after-free on address …
READ of size 8 at 0x614000001f48 thread T0
#0 0x5563df6e73a8 in init_ws_for_output i3/src/randr.c:468
#1 0x5563df6ef3b4 in randr_query_outputs i3/src/randr.c:940
#2 0x5563df68dbe1 in handle_screen_change i3/src/handlers.c:450
… is located 264 bytes inside of 448-byte region …
freed by thread T0 here:
#1 0x5563df634b0a in con_free i3/src/con.c:96
#2 0x5563df7151e6 in tree_close_internal i3/src/tree.c:344
#3 0x5563df7280fe in workspace_show i3/src/workspace.c:499
#4 0x5563df6e7315 in init_ws_for_output i3/src/randr.c:457
#5 0x5563df6ef3b4 in randr_query_outputs i3/src/randr.c:940
#6 0x5563df68dbe1 in handle_screen_change i3/src/handlers.c:450
Which is similar to #3228, #3248.
- Improve / add various error messages.
- Replace all `LOG(…); ysuccess(false);` with `yerror(…);`.
- switch_mode: Remove redundant "ERROR:" ELOG string.
- cmd_move_con_to_workspace*: Make sure that we don't try to move an
empty workspace to another workspace. This can be problematic when we
match a workspace using command criteria (eg marks) and the target is a
non-existing workspace. We create the new workspace but since nothing is
moved there, we are left with an empty workspace. See added testcase.
Modified section on the layout file's non-compliance with the JSON
standard. The section previously stated that having multiple top-level
JSON texts is non-compliant. This isn't the case. It's just that most
JSON parsers will treat that as if it is non-compliant.
Fixes#3156.
I couldn't reproduce the problem in a "natural" way so I cheated:
1. Start i3 with gdb
2. Set breakpoing on tree_restore
3. Run, open window, i3-msg restart
5. Open the file in *path with a hex editor
6. Edit the "name" field of the window and insert bytes that are not
valid UTF8
7. Continue
After parsing fails, all nodes including croot are incomplete, meaning
they have to be deleted. We can't recover in any reasonable way so we
have to allow non-UTF8 characters to avoid this situation altogether.
The default i3 config uses the `exec` command without `--no-startup-id`
to launch:
1. i3-nagbar
4cba9fcbda/etc/config (L150)
2. i3-config-wizard
4cba9fcbda/etc/config (L194)
A user that opens i3 for the first time will be greeted with a "loading"
cursor because of i3-config-wizard.
Introduces resize_neighboring_cons in resize.c which is also used by
resize_graphical_handler.
Co-authored-by: Andrew Laucius <andrewla@gmail.com>
Authored original code and tests in #3240. I rewrote most of the
resizing code and fixed the failing tests.
These are the changes that clang-format 6.0.1 makes to the codebase that
clang-format-3.8 doesn't change back.
Useful for those that use a more recent version of clang-format in their
local machines.
This commit will also fix the following bugs:
1. click.c: Users could drag global fullscreen floating containers.
2. render.c: Floating containers would get rendered with a global fullscreen container in another
workspace.
The first issue is that there seems to be a typo: fullscreen->window
should have been child->window. The corrected check is redundant since
the while loop checks if the transient_con has a window.
The second issue is that popup_during_fullscreen is never checked even
though the behaviour should be exclusive to the "smart" option.
A race condition is possible. For example, if we first receive a
XCB_MOTION_NOTIFY event and then, while drain_drag_events is still
running, a XCB_BUTTON_RELEASE event the first event is never handled
because we return.
This fixes the flakiness of the tests in #3085.
Right now tree_render() is called twice on DRAG_REVERT since
floating_reposition calls it.
Also, on DRAG_REVERT the scratchpad state shouldn't change since the
user canceled the action.
This change only affects clients that are subscribed to events, which
should be the main cause of our problems.
In the common case (no buffered data) the behaviour doesn't change at
all: the message is sent directly, no ev_io / ev_timeout callback is
enabled. Once a write to a client's socket is not completed fully
(returns with EAGAIN error), we put the message in the tail of a queue
and init an ev_io callback and a corresponding timer. If the timer is
triggered first, the socket is closed and the client connection is
removed. If the socket becomes writeable before the timeout we either
reset the timer if we couldn't push all the buffered data or completely
remove it if everything was pushed.
We could also replace ipc_send_message() for all client connections in
i3, not just those subscribed to events.
Furthermore, we could limit the amount of messages stored and increase
the timeout (or use multiple timeouts): eg it's ok if a client is not
reading for 10 seconds and we are only holding 5KB of messages for them
but it is not ok if they are inactive for 5 seconds and we have 30MB of
messages held.
Closes#2999Closes#2539
This commit makes multiple changes in tree_close_internal. I didn't
split them because they are not completely independent.
- Remove force_set_focus parameter
This parameter was always set to `false` throughout the code base except
for one case where it was set to `(con == focused)`, when killing a
floating con's parent (the one with type CT_FLOATING_CON). But this case
is not needed anymore since the special handling of CT_FLOATING_CONs in
con_next_focused was removed in #2941.
- Assume that con_next_focused does not returned a container of type
CT_DOCKAREA. This is reasonable since con_next_focused uses the
focus_head stack and has special handling of CT_DOCKAREA containers.
- Remove is_mapped
This variable was only used in the if block towards the end of
tree_close_internal. Ignoring the, now removed, dockarea code and the
use of force_set_focus this block performed only one useful action:
focus the `next` container when `con == focused`. `con == focused` was a
necessary and sufficient condition for the con_activate call:
if `con != focused` we could reach the inner if blocks because of the
other conditions but would never focus another container. If `con ==
focused` then all other conditions would be irrelevant.
- Remove special handling of floating containers
Since the `next` focused container is calculated through the parent for
floating containers, I moved this code to con_next_focused.
Also, because of the removal of force_set_focus, it appears that we can
call con_on_remove_child for floating containers as well.
This was introduced in 252db3b8c (#3245). That commit moved the
con_activate line inside the loop, meaning it wouldn't always be called.
When the mouse moved after a rename with focus_follows_mouse enabled,
check_crossing_screen_boundary (src/handlers.c:111) called
con_descend_focused that used the wrong focus order.
I also change con_activate to con_focus since we don't really want to
raise floating containers there.
Fixes#3325
This prohibits the usage of workspaces assigned to other outputs in
create_workspace_on_output.
Eg, with config:
workspace 1 output fake-0
workspace 2 output fake-0
and 2 screens workspace 2 would be used for the second screen even
though it is assigned to the first one.
Also introduces a test for workspace assignments that includes the case
described above and some tests that don't fail in the next branch.
This also replaces code in create_workspace_on_output() that is
theoretically more efficient but:
1. It isn't a huge difference since it depends on the number of outputs,
that shouldn't be high.
2. get_assigned_output will be modified and used for #555, then its
logic should be followed in create_workspace_on_output() too.
Another note for create_workspace_on_output: if assigned is not NULL the
condition (assigned != output->con) should never be false, ie if there
is an assigned output to this name, it isn't the current one. This
happens because the current callers check for assignments before calling
create_workspace_on_output().
https://www.x.org/releases/current/doc/kbproto/xkbproto.html#Detectable_Autorepeat
Detectable autorepeat should only affect --release bindings. Currently,
when a user keeps a key pressed, we get multiple KeyPress and KeyRelease
events. With this change, we still get multiple KeyPress events, which
means that you can still keep a key pressed to repeatedly execute a
normal binding, but only one KeyRelease event when the key is physically
released.
Unfortunately, this change is not currently testable because detectable
autorepeat doesn't seem to work under Xephyr. AwesomeWM experienced the
same problem:
6f2424e901Fixes#3306
The current text is confusing. '--no-auto-back-and-forth' doesn't
disable the 'workspace back_and_forth' command, the flag is not even
valid for that command.
X will not allow a window with ParentRelative background to be created
or reparented under a window with mismatching color depth.
Deal with this by destroying the container frame and creating a new one
with the right depth upon swallowing.
Defer destruction of the frame window until after the updated tree has
been rendered to avoid some distracting flickering.
Fixes#3297
This fixes a new warning from GCC 8.1, -Wstringop-truncation:
https://gcc.gnu.org/gcc-8/changes.htmlhttps://gcc.gnu.org/onlinedocs/gcc-8.1.0/gcc/Warning-Options.html#index-Wstringop-truncation
Replacing with memcpy is what gcc suggests:
> As another example, the following call to strncpy results in copying
> to d just the characters preceding the terminating NUL, without
> appending the NUL to the end. Assuming the result of strncpy is
> necessarily a NUL-terminated string is a common mistake, and so the
> call is diagnosed. To avoid the warning when the result is not
> expected to be NUL-terminated, call memcpy instead.
> void copy (char *d, const char *s)
> {
> strncpy (d, s, strlen (s));
> }
fbce834b introduced a bug where scrolling over the decoration while
another container is focused would not focus the tabbed/stacked
container itself, but would instead move focus through the currently
focused container.
- Align right border
- Add a missing '/' in libsn's and util-xrm's link for consistency
- Replace wrong character for border next to pango's min version
- Correct the Pod::Simple link
When moving a workspace to the current output by way of a rename, if the
current workspace is empty, it will be removed by `workspace_show`.
Attempting to restore focus to this removed workspace causes a crash.
Follow the pattern in workspace.c:996 to only restore the original focus if the
original workspace still exists.
Add a test to ensure that the renamed workspace moves to its appropriate
output and that a crash does not occur.
Fixes#3228
handle_screen_change() and handle_configure_notify() call
randr_query_outputs() where root_output is not initialized because
randr_init() is never called when config.fake_outputs is not NULL.
When we don't modify the focus we aren't risking giving focus to a
container behind the current fullscreen one.
_con_move_to_con can with ignore_focus is called through the swap
command or through con_move_to_workspace for floating containers. This
change shouldn't break the expectations of the callers there.
Fixes issue #3259.
This is enough to fix the crash discussed in #3259 even though the next
commit can fix it independently. This commit is useful because it
generally makes sense to abort the command when the first call to
_con_move_to_con fails.
- 'border toggle' now accepts an optional pixel argument which will be
ignored when switching to BS_NONE.
- 'border pixel' now defaults to 1 pixel instead of 2.
- Calling 'border normal' or 'border pixel' will use the configured
default_border_width if one exists. Also applies to floating windows.
Fix the issue #3227(https://github.com/i3/i3/issues/3227).
1).Make cmd_scratchpad_show() use the information coming from scratchpad_show().
2).Add a test case 298-scratchpad-show.t.
Was used for the removed option 'terminal' and for 'font'. 'font' is no
longer this aggressive and doesn't use the macro.
Killing i3 when an option is missing would be super backwards
incompatible so I doubt we are going to use this ever again.
When i3bar is called with the -V flag but there is no 'verbose yes'
directive in the bar {} config, the verbosity config value is reset.
This will introduce the opposite, negligible issue: you can't disable
i3bar's verbosity by deleting the 'verbose yes' directive in the bar {}
config. To fix this we would need an enum for config.verbose.
Closes#3220.
The title marker lines have to be aligned with the previous lines.
The error was caught by asciidoctor, which tends to be picker than
asciidoc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Was a small typo.
This also has the (positive) side-effect of allowing to move all the
content of a marked workspace next to the target container, see added
tests.
Currently when renaming outputs, an output assignment of "left" will
cause the workspace to move left. Treat this assignment as a proper name
instead (even though it is unlikely an output will be named "left").
Move logic for determining output to move to out of
`workspace_move_to_output`
Add test for ignoring direcionality during rename.
Fixes#3208.
Using 'default:' cases can hide logical errors which would lead to i3
crashes for users. With this change the compiler will print a warning
when a case is not handled. For example, if I add a new value in the
Font.type enum:
../../i3/libi3/font.c: In function ‘draw_text’:
../../i3/libi3/font.c:378:5: warning: enumeration value ‘NEWFONT’ not handled in switch [-Wswitch]
switch (savedFont->type) {
^~~~~~
The current behaviour is buggy in the following layout:
T [ A* V [ B C ] ], where the focus stack in V is B > C.
When the user scrolls down, focus correctly moves to B but if the user
scrolls down again the whole vertical container is focused.
This happens because 'bool scroll_next_possible' is false but
con_activate is called on the tabbed container's sibling - the vertical
container.
i3bar’s X11 output is not what our testcases are testing — the state
manipulations which i3bar triggers via IPC messages to i3 are what we are
interested in.
Sending the sync command via IPC ensures pending IPC messages are handled by i3
before the sync response is read. This is rarely useful for direct IPC
connections to i3, but becomes useful when synchronizing with i3bar, which might
have pending IPC messages in response to button clicks.
Explanation for the changed test:
After $third is switched to floating, the test moves focus to $second.
So, the parent of $second (the stacked container) is above $third in the
focus stack and it's children ($first, $second) should get focused
before $second. When $second is switched to floating the correct focus
order for the workspace should be $second->parent (floating con is the
parent) > $first->parent (stacked con) > $third.
Fixes#1975
Add --modifier flag to i3-config-wizard
The --modifier flag accepts either alt or win, and will generate the
configuration file without opening a window.
Also adds i3-config-wizard's flags to the manpage.
Fixes#3136.
Steps to reproduce:
1. Force the branch to be taken:
diff --git a/src/bindings.c b/src/bindings.c
index fe77bc8f..caa5848c 100644
--- a/src/bindings.c
+++ b/src/bindings.c
@@ -941,7 +941,7 @@ bool load_keymap(void) {
struct xkb_keymap *new_keymap = NULL;
int32_t device_id;
- if (xkb_supported && (device_id = xkb_x11_get_core_keyboard_device_id(conn)) > -1) {
+ if (0) {
if ((new_keymap = xkb_x11_keymap_new_from_device(xkb_context, conn, device_id, 0)) == NULL) {
ELOG("xkb_x11_keymap_new_from_device failed\n");
return false;
2. Run `python2 ./xproperty.py _XKB_RULES_NAMES ''` (from
https://github.com/siemer/xproperty) in the xinitrc
3. Memory sanitizers detect memory leaks.
Note: We don't (and didn't) pass NULL in xkb_keymap_new_from_names() but
an xkb_rule_names structures with NULL fields (fill_rmlvo_from_root only
fills its argument when there are no errors) should be equivalent:
767fa86d42/NEWS (L349-L351)
> The function xkb_keymap_new_from_names() now accepts a NULL value for
the 'names' parameter, instead of failing. This is equivalent to passing
a 'struct xkb_rule_names' with all fields set to NULL.
Fixes#2535.
Seems to be the intention, indicated by this comment (con.c:1307-1309):
/* For split containers, we use the currently focused container within it.
* This allows setting marks on, e.g., tabbed containers which will move
* con to a new tab behind the focused tab. */
Related to #3085.
xkb_state_new uses calloc and may fail in a rare case, which would cause a memory leak.
Note that xkb_state_unref checks if the parameter given is not null (!state) before freeing.
Calls to xkb_state_new have been grouped to remove code duplication.
Signed-off-by: Elouan Martinet <exa@elou.world>
con_next_focused uses con's parent. But since con can be inside an
unfocused container this means that one of it's siblings could become
focused in the current workspace.
The current_ws is shown latter anyway:
if (!ignore_focus) {
workspace_show(current_ws);
...
This also causes the following bug:
- Open a window in an empty workspace
- Switch to another workspace
- seturgent to the first window
- Move another window to the first workspace
- Urgent flag is now reset
This significantly reduces the number of ELOGs while dragging floating
containers. The behaviour is improved since floating containers in the
edge of the screen will still get reassigned to their closest workspace.
For example, consider this setup:
fake-outputs 500x500+0+0,500x500+500+0
Now, open a window in the right output and run:
i3-msg floating enable, move position 0 px 450 px
The window is on the bottom edge of the left workspace but if you run:
i3-msg focus mode_toggle
focus will go to the right workspace since floating_maybe_reassign_ws
didn't change the assigned workspace of the floating container.
This allows the floating container's top left corner to be mapped
outside any output as long as they are contained partially by one. This,
for example, will allow:
mpv --geometry +1+1 video.mp4
For windows mapped to (0, 0) see comment in floating.c:270-273:
/* Some clients (like GIMP’s color picker window) get mapped
* to (0, 0), so we push them to a reasonable position
* (centered over their leader) */
The floating_reassign_ws call is removed since we try to place the new
floating container in the current output:
/* Sanity check: Are the coordinates on the appropriate output? If not, we
* need to change them */
Fixes#1341
_NET_WM_STATE_FOCUSED is set on _NET_WM_STATE to indicate that the
window is focused. It must be set when the window is newly focused and
removed once the window no longer has focus.
> _NET_WM_STATE_FOCUSED indicates whether the window's decorations are
> drawn in an active state. Clients MUST regard it as a read-only hint.
> It cannot be set at map time or changed via a _NET_WM_STATE client
> message.
For example, this is used by GTK applications to show the decoration in
an active or inactive state. This change can be tested by opening a GTK
application (like evince), focusing the window and unfocusing the
window, and observing a change in the window decorations.
Fixes#2273
For command:
move window to [absolute] position X px Y px
if the optional keyword 'absolute' is provided the end result is the
same even though it is implemented differently. Only difference is that
with absolute the floating window can move completely outside of any
output.
This commit removes the 'method' argument and only keeps the sane
implementation.
With example config:
mode "a_mode" {
bindcode 27 --release mode "default"
}
bindsym $mod+r mode "a_mode"
The first time $mod+r is pressed "a_mode" is activated like normal. When
r (bindcode 27) is pressed to exit the mode:
- On the KeyPress event the corresponding bind->release is correctly
marked as B_UPON_KEYRELEASE_IGNORE_MODS.
- On the KeyRelease event the command 'mode "default"' is executed but
bind->release is still B_UPON_KEYRELEASE_IGNORE_MODS since they are only
reset on KeyPress events.
The second time $mod+r is pressed and "a_mode" is activated and when the
r key is released the 'mode "default"' is executed even though the mods
are not matching since bind->release == B_UPON_KEYRELEASE_IGNORE_MODS.
This still doesn't catch 2 cases:
1. When the order is: press $mod -> press r -> release $mod -> release
r. Since 'r' is released without any modifiers the binding matches.
2. With:
mode "resize" {
bindsym --release r mode "default"
}
bindsym r mode "resize"
This is arguably correct: on the KeyPress event we switch to the mode and
on the KeyRelease we switch back.
Before this commit, get_binding() exited on the first match without
marking the rest --release bindings with B_UPON_KEYRELEASE_IGNORE_MODS.
Similarly, once it found a --release binding during a KeyPress event it
would stop searching for a matching key press binding.
Example config, placing the --release line first will trigger the second
problem:
# i3 config file (v4)
bindsym Super_L exec notify-send "press"
# or
# bindcode 133 exec notify-send "press"
bindsym --release Super_L exec notify-send "release"
# or
# bindcode --release 133 exec notify-send "release"
Fixes#2733
From 548d74015c:
> 1. press $mod, press x, release x, release $mod
> 2. press $mod, press x, release $mod, release x
case (2.) didn't work, now it should be fixed.
When we run 'reload' all the assignments are freed:
e3e09119bf/src/config.c (L99-L109)
Assignments are saved to each window after they are executed:
e3e09119bf/src/assignments.c (L41-L46)
This means that the pointers stored in window->ran_assignments are
invalid (shouldn't be dangerous currently but could lead to a segfault
if the code is modified) after a 'reload'.
Before:
$ i3-msg floating disable, move window to position 100 px 100 px
ERROR: Your command: (null)
ERROR: (null)
ERROR: Cannot change position of a window/container because it is not floating.
[{"success":true},{"success":false,"error":"Cannot change position of a window/container because it is not floating."}]
After:
$ i3-msg floating disable, move window to position 100 px 100 px
ERROR: Cannot change position of a window/container because it is not floating.
[{"success":true},{"success":false,"error":"Cannot change position of a window/container because it is not floating."}]
Remove the assumption that only two atoms can possibly be set in
t/253-multiple-net-wm-state-atoms.t so that the tests will pass when
more atoms are supported that may be set during this test.
Fixes:
- Issue where moving an urgent (unfocused) window resets it's urgency
hint.
- Moving an unfocused container to a new parent should not move it to
the top of the focus stack.
This deals with (admittedly somewhat misbehaving) clients which
use XSetInputFocus to take focus, but then don't properly restore
focus. This has been observed with TK apps, but also, e.g., Steam.
fixes#2722fixes#3096
From comment:
https://github.com/i3/i3/issues/2990#issuecomment-368345169
To easily reproduce:
1. Open 2 floating windows
2. Focus (with `focus_follows_mouse`) the one behind
3. Move the mouse to the other workspace
4. Move the mouse inside the previous workspace (without it even
touching a window)
The front page and docs landing page emphasize documentation, but the user guide looks like it hasn't been updated since 2013. It seems from the history of the file that this number is misleading. Let me know if I'm missing anything.
The old comments gave the impression that you had to define workspace names upfront, which is not true. This also keeps the overall config as brief as possible.
Relabeling the workspaces required the user to update the labels at least in two places of the i3 config file (switch to workspace + move focused container to workspace) to keep a consistent state.
This got even worse when the user started to reference the workspaces elsewhere, e.g. for assigning containers to specific workspaces.
This change supports the DRY principle for users. Relabeling the workspaces is now merely a matter of changing the respective variable ($ws1, $ws2, … $ws10).
Add support for relative coordinates in i3bar click events
Rename {x,y}_rel to relative_{x,y}
Update i3bar-protocol doc to mention the added fields in click events
The problem here is that con_fullscreen_permits_focusing() does not
check if there is a blocking fullscreen container in the workspace that
the container to be focused belongs. This makes it possible to focus a
container behind a fullscreen window if it's in an unfocused workspace.
This commit introduces a change in the 'focus' command behaviour. When
focusing a container blocked by a fullscreen container, either CF_OUTPUT
or CF_GLOBAL, the blocking container loses its fullscreen mode and the
target container is focused like normal.
This should not affect directional focus commands: left, right, up,
down, parent, child.
Fixes issue #1819.
The bug triggers when _workspace_show calls tree_close_internal and
old == old_focus. Ie, when the old workspace was empty and needs to be
closed but then is accessed as output_push_sticky_windows's argument:
Breakpoint 1, output_push_sticky_windows (to_focus=0x55555589c8a0) at ../../i3/src/output.c:102
102 con_move_to_workspace(current, visible_ws, true, false, current != to_focus->parent);
(gdb) print con_exists(to_focus)
$1 = false
The access violation can also be prevented by checking if
con_exists(old_focus) but it shouldn't be necessary: the old_focus
container can only be killed when it is an empty workspace.
With --enable-sanitizers this causes i3 to exit but with
--disable-sanitizers the access violation doesn't reliably cause a crash
and the con_move_to_workspace call continues with:
(gdb) print current != to_focus->parent
$2 = 1
Since current->type is CT_FLOATING_CON and to_focus->type is
CT_WORKSPACE, in this specific case ignore_focus would always be true.
So, in this case, passing NULL instead of old_focus to
output_push_sticky_windows doesn't change the behaviour of i3.
Fixes#3075.
Prevents a false-positive error eg with config file:
set $mod Mod4
bindsym $mod+h split h
bindsym $mod+v split v
ERROR: CONFIG: Expected one of these tokens: <end>, '#', 'set ', ...
ERROR: CONFIG: Line 8: status_command i3status
ERROR: CONFIG: Line 9: }
ERROR: CONFIG: Line 10: <BE><BE><BE><BE><BE><BE>
With this change i3 will correctly switch to the focused workspace.
This fixes bug with moving floating windows with 'move <direction>' or by dragging like _NET_CURRENT_DESKTOP not getting updated or 'workspace back_and_forth' not working.
Fixes#2921.
i3bar's handle_button is modified to also handle XCB_BUTTON_RELEASE
events. During these button release events, only custom commands are
checked to avoid sending multiple workspace ipc messages.
The way this patch is implemented will allow to assign a custom command
for both the press and release of the same button:
bar {
...
bindsym buttonX exec command1
bindsym --release buttonX exec command2
}
Fixes#3068.
Issue #3049 describes a case where terminating i3 by means of SIGTERM
causes it to leak the runtime directory and all its contents. There are
multiple issues at play: first, any cleanup handlers registered via
atexit are never invoked when a signal terminates the program (see
atexit(3)). Hence, the log SHM log cleanup performed in i3_exit is not
invoked in that case. Second, compared to the shutdown path for the
'exit' command, we do not unlink the UNIX domain socket we create,
causing it to be leaked as well. Third, a handler for SIGTERM is not
registered at all despite handle_signal claiming to be the handler for
all 'Term' signals.
This change addresses all three problems and results in a graceful exit
including cleanup to happen when we receive a signal with the default
action 'Term'. It addresses issue #3049.
In i3bar/src/config.c we compare string lengths agains magic numbers.
This change replaces those numbers with the lengths of the strings they
represent.
The userguide still mentions an old 'goto' command which no longer
exists and will be ignored silently (when used in the i3 config) or
causes an error to be reported (when invoked from the command line).
This change updates the userguide to correct this problem. In addition
to that it also updates the i3-input command shown to no longer use the
deprecated -p flag but -F instead.
Previously, we used ev_check watchers, which are executed at the beginning of an
event loop iteration.
This was problematic if one of the handlers happened to fill the XCB event
queue, e.g. by reading a reply from X11 and an event happened in the meantime.
In that situation, we would hand control to the event loop, entirely ignoring
the pending event. This would manifest itself as a 1-minute hang,
reproducible (sometimes) in the i3 testsuite.
issue #2790 describes an instance of this issue in i3bar, and we fixed that by
changing the watcher priority to run last. Handling events in xcb_prepare_cb has
the same effect, as ev_prepare watchers are run just before the event loop goes
to sleep.
We need to set dont_map => 1 on the sync window to prevent an endless loop.
Further, t/219-ipc-window-focus.t made assumptions about windows being named
incrementally, and that assumption is broken by the sync window opened by the
first sync_with_i3 call from open_window, so use the more reliable ->name.
The sender of the _NET_ACTIVE_WINDOW client message might know better when to
set focus than i3, as i3 does not know about unmanaged (override_redirect=1)
windows.
related to https://github.com/i3/i3lock/issues/35
1). Add one regression test in 167-workspace_layout.t:
- Get a fresh workspace
- Set the layout to something
- Create windows
- Try to switch to another layout
- Check if successful
- Repeat for all 12 possible transitions
2). Add another regression test in 167-workspace_layout.t:
- Check that the command 'layout toggle split' works regardless of
what layout we're using
stbuf.st_size is of type off_t, which the standard defines as “extended signed
integral type”¹, and for which there is no correct printf format string. Hence,
we need to cast it into a hopefully-large-enough type (ugh) and use the
corresponding format string. In our case, int64_t should do it, as config files
really shouldn’t be anywhere close to those numbers.
① http://pubs.opengroup.org/onlinepubs/007908799/xsh/systypes.h.html
This way, when changing focus between outputs, the directional focus
command will focus the focused window within the parent container that
is next in the given direction.
Previously, the next window of the given direction was focused which is
Inconsistent with changing focus inside the same output.
Fixes#1160.
Allow enabling forced focus wrapping by specifying "focus_wrapping
force" in i3's configuration. This syntax supersedes the previous
"force_focus_wrapping yes" one, which remains available for backwards
compatibility.
This fixes a crash that occurs when disabling floating for a container
while it is being moved or resized.
@Deiz describes the problem:
> It occurs because the command that disables floating runs before the
event loop. So, the window is tiled, its floating parent is destroyed,
but then a key event is handled which causes the position/size of the
now-destroyed parent to be modified.
Fixes#1627
Applied for:
1. '[...] focus' for a floating container raises it to the top.
2. Focusing a window through a focus event raises it to the top.
Fixes#2572
This fixes a crash that occurs when disabling floating for a container
while it is being moved or resized.
@Deiz describes the problem:
> It occurs because the command that disables floating runs before the
event loop. So, the window is tiled, its floating parent is destroyed,
but then a key event is handled which causes the position/size of the
now-destroyed parent to be modified.
Fixes#1627
Applied for:
1. '[...] focus' for a floating container raises it to the top.
2. Focusing a window through a focus event raises it to the top.
Fixes#2572
canonicalize_output_name allowed the "primary" special output name to
be canonicalized, thus converting it to the name of whatever output
was the primary output at the time. This caused settings
(specifically, i3bar output and tray_output settings) to be stored as
specific output names, instead of the intended special names whose
referred output may change as the system's configuration (i.e. current
primary output) changes.
Add a check to canonicalize_output_name to return the name as-is if it
is the special name "primary".
Allow appending 'P' to the fake output specification to set the
created output's "primary" flag, to allow writing test cases that
depend on the presence of a primary output.
fake_outputs_init would unconditionally increase the string read
pointer variable (walk) by one character more than the number of
characters that have been read, to skip past the character delimiting
records (a comma). However, when the input string was not terminated
by a comma, it would cause the function to read past the null
terminator instead.
Avoid this by explicitly checking for the expected delimiter.
fake_outputs_init used a sprintf invocation with a throw-away buffer
to estimate how many characters the sscanf invocation consumed. This
was unnecessary, and also potentially incorrect, as differences
between the read and formatted strings (such as leading zeros) could
lead to fake_outputs_init to lose its track.
Instead, use the %n format specifier which allows saving the number of
characters consumed by sscanf so far. %n is part of C99.
canonicalize_output_name allowed the "primary" special output name to
be canonicalized, thus converting it to the name of whatever output
was the primary output at the time. This caused settings
(specifically, i3bar output and tray_output settings) to be stored as
specific output names, instead of the intended special names whose
referred output may change as the system's configuration (i.e. current
primary output) changes.
Add a check to canonicalize_output_name to return the name as-is if it
is the special name "primary".
Allow appending 'P' to the fake output specification to set the
created output's "primary" flag, to allow writing test cases that
depend on the presence of a primary output.
fake_outputs_init would unconditionally increase the string read
pointer variable (walk) by one character more than the number of
characters that have been read, to skip past the character delimiting
records (a comma). However, when the input string was not terminated
by a comma, it would cause the function to read past the null
terminator instead.
Avoid this by explicitly checking for the expected delimiter.
fake_outputs_init used a sprintf invocation with a throw-away buffer
to estimate how many characters the sscanf invocation consumed. This
was unnecessary, and also potentially incorrect, as differences
between the read and formatted strings (such as leading zeros) could
lead to fake_outputs_init to lose its track.
Instead, use the %n format specifier which allows saving the number of
characters consumed by sscanf so far. %n is part of C99.
I previously tried to fix the check, but could only come up with a fix which
required removing our module pre-loading, which makes the tests considerably
more expensive. Instead, let’s just remove the check.
$config is never touched after being initially set up.
Not restarting i3 between each test case reduces the runtime of this test by an
order of magnitude.
All other message types are verbs, only our first-ever message COMMAND wasn’t.
While we’re here, also change the message type dictionary into a table with
clickable links to the corresponding reply type.
Authors of downstream IPC libraries are encouraged to keep the old name around
so as to not break existing code, but mark it as deprecated.
This fixes a regression introduced in commit
4e88c10564: when attempting to move the
single child of a container in the direction of another output, i3
would move the window to the output, despite the window not being at
the edge of its output, instead of moving it to its parent container.
The bug occurred because the check for moving containers across
outputs with non-default workspace layouts (issue #1603) did not
actually verify that the moved window lies at the edge of the
workspace, despite what its comment said.
Fixes issue #2466.
All other message types are verbs, only our first-ever message COMMAND wasn’t.
While we’re here, also change the message type dictionary into a table with
clickable links to the corresponding reply type.
Authors of downstream IPC libraries are encouraged to keep the old name around
so as to not break existing code, but mark it as deprecated.
This fixes a regression introduced in commit
4e88c10564: when attempting to move the
single child of a container in the direction of another output, i3
would move the window to the output, despite the window not being at
the edge of its output, instead of moving it to its parent container.
The bug occurred because the check for moving containers across
outputs with non-default workspace layouts (issue #1603) did not
actually verify that the moved window lies at the edge of the
workspace, despite what its comment said.
Fixes issue #2466.
Makes "assign [<criteria>] workspace number <number>" work in the same
manner as "move to workspace number <number>" instead of assigning the
window to a workspace named "number <number>".
config.spec is modified to expect a 'number' string and an extra
argument is used in cfg_assign.
For workspaces that don't exist yet, workspace_get is used as a
fallback. This also allows the user to assign to "<number> <workspace>"
eg "2: work" and the full name will be used if workspace number 2
doesn't exist yet.
Fixes#2590.
This way you can assign the test windows to an empty workspace to avoid
interacting with them (when xvfb-run is not an option):
assign [instance="i3test"] workspace testing
I previously tried to fix the check, but could only come up with a fix which
required removing our module pre-loading, which makes the tests considerably
more expensive. Instead, let’s just remove the check.
This commit also introduces slurp() which reads a file in its entirety. Using
this function instead of doing IO in the functions in load_layout.c again and
again makes the code cleaner (fixing at least two memory leaks) and avoids
re-reading the same file 3 times.
related to #2755
Convert the output names specified in the "output" and "tray_output"
fields in bar blocks in i3's configuration to the referred output's
primary name. This allows specifying names other than the primary
output's name in the given fields without changing the IPC protocol.
In addition to the name of the monitor itself (which is still used as
the i3 output's primary name), register RandR output names associated
with the RandR monitor as alternative i3 output names.
Currently, only one name is ever added, and only the first name is
ever accessed; actually using the capability to store and access
multiple names comes in the following commits.
Currently simply returns output->name, but this will make it easier to
change how output names are stored in the following commits.
Also replace reading output->name with invocations of
output_primary_name. Code which writes output->name is unchanged. Done
using a mostly mechanical replacement of output->name to
output_primary_name(output).
- Promote the "How to build?" sub-section to a top-level
section ("Building i3")
- Convert the "Introduction" sub-section as the intro to the remaining
contents of the "Using git / sending patches" section
- Keep "Which branch to use?" as a level-3 sub-section, thus making it
a sub-section of what used to be the "Introduction" sub-section.
The test runs `xrandr setmonitor`, which will otherwise affect any test
scheduled after 533-randr15.t, causing flakyness in t/217-NET_CURRENT_DESKTOP.t
for example.
This file uses the same settings which we currently have in our vim modeline,
but can be picked up by many different editors without having to add and
maintain editor-specific modelines in all of our source files.
This commit also introduces slurp() which reads a file in its entirety. Using
this function instead of doing IO in the functions in load_layout.c again and
again makes the code cleaner (fixing at least two memory leaks) and avoids
re-reading the same file 3 times.
related to #2755
Convert the output names specified in the "output" and "tray_output"
fields in bar blocks in i3's configuration to the referred output's
primary name. This allows specifying names other than the primary
output's name in the given fields without changing the IPC protocol.
In addition to the name of the monitor itself (which is still used as
the i3 output's primary name), register RandR output names associated
with the RandR monitor as alternative i3 output names.
Currently, only one name is ever added, and only the first name is
ever accessed; actually using the capability to store and access
multiple names comes in the following commits.
Currently simply returns output->name, but this will make it easier to
change how output names are stored in the following commits.
Also replace reading output->name with invocations of
output_primary_name. Code which writes output->name is unchanged. Done
using a mostly mechanical replacement of output->name to
output_primary_name(output).
- Promote the "How to build?" sub-section to a top-level
section ("Building i3")
- Convert the "Introduction" sub-section as the intro to the remaining
contents of the "Using git / sending patches" section
- Keep "Which branch to use?" as a level-3 sub-section, thus making it
a sub-section of what used to be the "Introduction" sub-section.
The test runs `xrandr setmonitor`, which will otherwise affect any test
scheduled after 533-randr15.t, causing flakyness in t/217-NET_CURRENT_DESKTOP.t
for example.
• The output currently contains a large number of false-positives and — AFAICT —
no actual issues.
• Upstream shows little interest in addressing the long-standing issues with the
TAILQ macros, so the false-positive situation probably won’t change soon:
https://bugs.llvm.org/show_bug.cgi?id=18222
Currently, we largely spend travis CPU cycles on this, for no additional value.
$config is never touched after being initially set up.
Not restarting i3 between each test case reduces the runtime of this test by an
order of magnitude.
For opaque text, SOURCE is not any different from OVER. However, when
drawing color glyphs (which consist of RGBA pixels instead of strokes)
SOURCE's handling of alpha is not what we want.
I stumbled across this because cairo 1.15.8 seems to clear the surface
before drawing color emoji if the operator is SOURCE, deleting every-
thing drawn before. Arguably, the area outside the glyph bounds should
not be touched, but even if this is a cairo bug the problem of alpha
within the glyph remains.
The code in handle_signal() wasn't clearing the struct sigaction before passing it to sigaction().
This meant that we would block a random set of signals while executing the default handler, or jump to the uninitialized __sa_sigaction__ (instead of sa_handler).
Initialize properly as we do in setup_signal_handler().
If conn == NULL or display == NULL, init_dpi() jumps to init_dpi_end
before (declaring and) initializing resource. In init_dpi_end, there
is a free(resource) call conditionally on resource != NULL, so this
may lead to a bogus free. Found by clang -Wsometimes-uninitialized.
The code in handle_signal() wasn't clearing the struct sigaction before passing it to sigaction().
This meant that we would block a random set of signals while executing the default handler, or jump to the uninitialized __sa_sigaction__ (instead of sa_handler).
Initialize properly as we do in setup_signal_handler().
If conn == NULL or display == NULL, init_dpi() jumps to init_dpi_end
before (declaring and) initializing resource. In init_dpi_end, there
is a free(resource) call conditionally on resource != NULL, so this
may lead to a bogus free. Found by clang -Wsometimes-uninitialized.
This fixes the following issue when having an error early in the config file:
==1562==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6220000180ff at pc 0x55c837edb1d3 bp 0x7ffee7534650 sp 0x7ffee7534648
READ of size 1 at 0x6220000180ff thread T0
#0 0x55c837edb1d2 in start_of_line ../../i3/src/config_parser.c:238
#1 0x55c837edc96f in parse_config ../../i3/src/config_parser.c:493
#2 0x55c837edf527 in parse_file ../../i3/src/config_parser.c:1091
#3 0x55c837ecf14b in parse_configuration ../../i3/src/config.c:65
#4 0x55c837ed1ef4 in load_configuration ../../i3/src/config.c:230
#5 0x55c837f0a8d0 in main ../../i3/src/main.c:539
#6 0x7fb63ae042b0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202b0)
#7 0x55c837e95eb9 in _start (/home/michael/i3/build/i3+0x4beb9)
0x6220000180ff is located 1 bytes to the left of 5165-byte region [0x622000018100,0x62200001952d)
allocated by thread T0 here:
#0 0x7fb63e590cf8 in malloc (/usr/lib/x86_64-linux-gnu/libasan.so.3+0xc1cf8)
#1 0x55c837f59aa6 in smalloc ../../i3/libi3/safewrappers.c:24
#2 0x55c837edef45 in parse_file ../../i3/src/config_parser.c:1029
#3 0x55c837ecf14b in parse_configuration ../../i3/src/config.c:65
#4 0x55c837ed1ef4 in load_configuration ../../i3/src/config.c:230
#5 0x55c837f0a8d0 in main ../../i3/src/main.c:539
#6 0x7fb63ae042b0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202b0)
This introduces memory usage by one copy of the config file, which is an
acceptable trade-off for being able to easily revert data loss.
The default config is 6KB, user configs will be in the same ballpark.
fixes#2856
Official autoconf docs contraindicate the use of the $sysconfdir
variable in configure.ac. For reference:
https://www.gnu.org/software/autoconf/manual/autoconf-2.63/html_node/Installation-Directory-Variables.html
The macro SYSCONFDIR (ordinarilly set to "/etc") is required to find
a system configuration file installed with i3. In some build setups,
this may not be defined properly in when the configure script is
compiled.
Instead, define this variable in AM_CPPFLAGS as the documentation
indicates.
fixes#2832
If getopt() returns '?' (option with a missing argument), exit the program with an error code rather than continuing the execution.
Fix the issue #2804 (https://github.com/i3/i3/issues/2804).
This patch fixes the issue #2802 (https://github.com/i3/i3/issues/2802).
1). Revise the state machine for the 'rename workspace' command.
These scenarios are considered:
a). 'rename workspace to to bla'
state transitions: RENAME -> RENAME_WORKSPACE -> RENAME_WORKSPACE_LIKELY_TO -> RENAME_WORKSPACE_LIKELY_TO_NEW_NAME
b). 'rename workspace to tosomething'
state transitions: RENAME -> RENAME_WORKSPACE -> RENAME_WORKSPACE_LIKELY_TO
c). 'rename workspace to to'
state transitions: RENAME -> RENAME_WORKSPACE -> RENAME_WORKSPACE_LIKELY_TO
d). 'rename workspace to bla'
state transitions: RENAME -> RENAME_WORKSPACE -> RENAME_WORKSPACE_LIKELY_TO
e). 'rename workspace bla to foo'
state transitions: RENAME -> RENAME_WORKSPACE -> RENAME_WORKSPACE_TO -> RENAME_WORKSPACE_TO_NEW_NAME
2). Add a test case in 117-workspace.t for the scenario b.
The lookup order stated in the i3 manpage was is contratiction to the
actual lookup order, which was introduced with commit
bfa12a5819.
Since that commit (6.5 years ago) the "traditional" paths took precedence
over XDG_CONFIG paths.
Subset comparison was introduced with the rather large commit
bf3cd41b5d, but I now think we should use
equality.
In other words, the following key binding:
bindsym Mod4+x nop Mod4+x
previously would have been triggered when pressing Mod3+Mod4+x.
Strictly speaking, this is a change of behavior, but it breaks none of our
tests, and using equality instead of subset comparison enables more use-cases.
fixes#2002
This patch fixes the issue #2511(https://github.com/i3/i3/issues/2511).
1). Memorize the marks, but only call con_mark once the container has finished parsing. (Credit: This is @Airblader's patch.)
2). Add a test case 267-regress-mark-restart.t for regression test to check if mark and restart command crash i3.
If a .desktop entry is being added to the list of Menu items by its "Name" field, it should not be added again by its command or filename.
If it is being added by its command, it should not be added again by its filename.
As of 2f0f8b1, i3bar will properly clean up on output change events.
However, this requires us to query the workspaces again to avoid a
display error in i3bar.
fixes#2740fixes#2743
This introduces the flag --exclude-titlebar for mouse bindings which
allows bindings like
bindsym --whole-window --border --exclude-titlebar button3 focus
fixes#2347
According to the Desktop Entry Specification
https://specifications.freedesktop.org/desktop-entry-spec/desktop-entry-spec-latest.html#exec-variables
the executable name or path of the executable may be quoted. This is not
properly respected when i3-dmenu-desktop extracts the command name from
the Exec entry.
Examples of values that fail and what they currently result in:
- "bar" -> "bar"
- "foo/bar" -> bar"
- "foo foobar/bar" -> "foo
- "foo\sbar" -> "foo\sbar"
- foo\sbar -> foo\sbar
- "foo\\\\bar" -> "foo\\\\bar"
With this PR the 'layout toggle' command can be passed any
combination of valid layout keywords as arguments. They will
be activated one after another each time you issue the command,
advancing from left to right always selecting the layout after
the currently active layout or the leftmost layout if the active
layout is not in the argument list.
This PR also incorporates the feature request from #2476.
With commit d58dbc3 we started ignoring Expose events in a sequence
except for the last one. Since we only copied the affected part of
the window in the Expose event handler, this caused incorrectly
rendered window decorations.
Instead of reverting to the old behavior, we now copy the entire window
content on this single, last event with the following rationale:
- It's cheaper to copy a larger chunk once than multiple smaller
chunks doing one server roundtrip each.
- That's how we do it when rendering out decoration on decoration
changes as well.
fixes#2683
The possible values "rename", "reload" and "restored" of the property
'change' from the workspace event were missing. Because no events of
those types contain an old workspace, this was trivial.
This event is triggered when the connection to the ipc is about to
shutdown because of a user action such as with a `restart` or `exit`
command. The `change` field indicates why the ipc is shutting down. It
can be either "restart" or "exit".
fixes#2318
Previously rendering marks and the title were skipped if the title is empty. With marks
this is obviously wrong, with the title it is also wrong because title_format might be
set.
Doing a hard exit() is a rather harsh action for something i3 can handle
perfectly fine and is only meant to be a check to make debugging easier
for users in certain situations.
Thanks to @psychon for pointing this out during the review of PR #2624.
This commit extends this change to all other occurences of Expose events
within i3.
While defining the same mode usually wouldn't hurt and, in fact, the old behavior
allows to split the definition of a binding mode into several blocks, this
can lead to user errors where they accidentally define a mode twice and don't understand
why the mode behaves a certain way (this has been observed in real life :-)).
There's no good usecase for splitting a single binding mode into multiple blocks, thus
the new behavior is better.
fixes#2615
This commit is a rewrite of the popup dialogs used when i3 crashes. We now
use our draw_util suite and both properly react to EXPOSE events and clean
up the windows when the handler exits.
As a side-effect, this fixes#2422
This commit removes all traces of setting and reverting the input focus
in i3-input. We don't need to do this because grabbing the keyboard is
sufficient to have the attention we need.
Changing the input focus and reverting it can cause situations where i3
executes the IPC command before processing the FocusIn events. This leads
to i3's input focus change to be rejected due to the timing, leading to
an inconsistent focus state.
fixes#2597
This commit introduces proper support for the minimum size on floating
windows by ensuring that it is respected during mapping, later changes as
well as resizes.
Furthermore, this commit fixes minor issues with how the hints are handled
during calculations.
fixes#2436
This comes with the intentionally undocumented --disable-randr15 command
line flag and disable-randr15 configuration directive. We will add
documentation before the release if and only if it turns out that users
actually need to use this flag in their setups. Ideally, nobody would
need to use the flag and everything would just keep working, but it’s
better to be safe than sorry.
fixes#1799
xcb_draw_line is unused since commit
d7f9700ba4
xcb_draw_rect is unused since commit
a79d33fc7f
xcb_raise_window is unused since commit
7208d01048
xcb_warp_pointer is unused since commit
755c618cd4
This tool is similar to xtrace in usage in that it intercepts traffic to
the X server. The motivating feature for writing the tool is its ability
to inject prepared reply messages instead of the server’s reply. In
this particular case, we’ll inject a RRGetMonitors reply to test i3’s
RandR 1.5 code paths.
The added testcase is a noop for now, but with the code that’s lingering
in the randr15 branch, i3 does actually detect monitors as per the
injected reply:
2016-11-20 21:10:05 - randr.c:__randr_query_outputs:618 -
RandR 1.5 available, querying monitors
2016-11-20 21:10:05 - randr.c:__randr_query_outputs:628 -
1 RandR monitors found (timestamp 0)
2016-11-20 21:10:05 - randr.c:__randr_query_outputs:646 -
name DP3, x 0, y 0, width 3840 px, height 2160 px, width 520 mm,
height 290 mm, primary 1, automatic 1
This is preparation work for issue #1799
Fix memory leaks when executing 'i3 --moreversion'.
=================================================================
==14852==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 159 byte(s) in 1 object(s) allocated from:
#0 0x7fea40855602 in malloc (/usr/lib/x86_64-linux-gnu/libasan.so.2+0x98602)
#1 0x4c4c4a in smalloc ../../i3/libi3/safewrappers.c:24
#2 0x4c3aee in ipc_recv_message ../../i3/libi3/ipc_recv_message.c:61
#3 0x44dc2e in display_running_version ../../i3/src/display_version.c:94
#4 0x472947 in main ../../i3/src/main.c:269
#5 0x7fea3d0c982f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2082f)
Direct leak of 39 byte(s) in 2 object(s) allocated from:
#0 0x7fea40855602 in malloc (/usr/lib/x86_64-linux-gnu/libasan.so.2+0x98602)
#1 0x7fea3d11f7d7 in vasprintf (/lib/x86_64-linux-gnu/libc.so.6+0x767d7)
SUMMARY: AddressSanitizer: 198 byte(s) leaked in 3 allocation(s).
https://llvm.org/bugs/show_bug.cgi?id=30353 was filed for the unintended
line break between in e.g. “TAILQ_ENTRY(foo)\nbar;”.
Until that’s fixed or a workaround is known, we’ll live with line
breaks. To make it a bit easier for readers to see what’s going on, I
added extra line breaks around each such struct member/variable
definition, so that they at least visually are a single unit.
fixes#2174
Without the prefix, the etc/ directory will be copied from the source
directory, as opposed to the debian/tmp directory into which files were
installed.
Fix the issue #2421 (https://github.com/i3/i3/issues/2421).
floating_enable() invokes tree_close_internal() to free con->parent.
After con->parent is freed in tree_close_internal() but before con->parent is reassigned by the caller, con->parent may be dereferenced and causes i3 crash.
The backtrace below is an example.
The already-freed pointer is dereferenced again through the pointer "focused" in x_push_changes().
Reassign con->parent before calling tree_close_internal() to fix this use-after-free bug.
0x0000000000416372 in con_get_workspace (con=0x7ab9c0) at ../i3/src/con.c:375
0x0000000000416103 in con_has_managed_window (con=0x7ab9c0) at ../i3/src/con.c:266
0x000000000042b413 in x_push_changes (con=0x78d190) at ../i3/src/x.c:1132
0x0000000l0004533e8 in tree_render () at ../i3/src/tree.c:504
0x0000000000452b4f in tree_close_internal (con=0x7b67c0, kill_window=DONT_KILL_WINDOW, dont_kill_parent=false, force_set_focus=false)
../i3/src/tree.c:314
0x00000000004196f0 in con_on_remove_child (con=0x7b67c0) at ../i3/src/con.c:1801
0x0000000000452eb7 in tree_close_internal (con=0x783840, kill_window=DONT_KILL_WINDOW, dont_kill_parent=false, force_set_focus=false)
../i3/src/tree.c:364
0x0000000000431516 in floating_enable (con=0x7ab9c0, automatic=false) at ../i3/src/floating.c:183
0x0000000000431eed in toggle_floating_mode (con=0x7ab9c0, automatic=false) at ../i3/src/floating.c:379
0x0000000000420d92 in cmd_floating (current_match=0x679a20 , cmd_output=0x679aa0 , floating_mode=0x7ab8c0 "toggle")
../i3/src/commands.c:1088
0x000000000043e5ae in GENERATED_call (call_identifier=60, result=0x679aa0 ) at include/GENERATED_command_call.h:486
0x000000000043ee19 in next_state (token=0x675d70 ) at ../i3/src/commands_parser.c:187
0x000000000043f2fb in parse_command (input=0x7b4fe0 "floating toggle", gen=0x0) at ../i3/src/commands_parser.c:308
0x00000000004125f8 in run_binding (bind=0x784260, con=0x0) at ../i3/src/bindings.c:792
0x000000000042bace in handle_key_press (event=0x7a01a0) at ../i3/src/key_press.c:33
0x000000000044e6aa in handle_event (type=2, event=0x7a01a0) at ../i3/src/handlers.c:1420
0x0000000000439533 in xcb_check_cb (loop=0x7ffff532f8e0, w=0x68c140, revents=32768) at ../i3/src/main.c:133
0x00007ffff5125d73 in ev_invoke_pending () from /usr/lib/x86_64-linux-gnu/libev.so.4
0x00007ffff51293de in ev_run () from /usr/lib/x86_64-linux-gnu/libev.so.4
0x0000000000439418 in ev_loop (loop=0x7ffff532f8e0, flags=0) at /usr/include/ev.h:835
0x000000000043d51d in main (argc=3, argv=0x7fffffffe0a8) at ../i3/src/main.c:913
I3_VERSION is used as string literal in config.h, i.e.:
#define I3_VERSION …
Where “…” is replaced with the contents of I3_VERSION.
For our travis builds, we persist the version number to I3_VERSION,
i.e.:
$ cat I3_VERSION
4.12-150-g8ddc187 (2016-10-25, branch "next")
Previously, config.h would end up with:
#define I3_VERSION "4.12-150-g8ddc187 (2016-10-25, branch "next")"
Note the unquoted double quotes around “next”, which are invalid in
C string literals.
Hence, this commit uses sed to escape double quotes, question marks and
backslashes (see also http://stackoverflow.com/a/12208808/712014).
The @<:@ and @:>@ quadrigraphs that m4 expands to [ and ], respectively,
see also http://stackoverflow.com/a/2309394/712014
Including config.h is necessary to get e.g. the _GNU_SOURCE define and
any other definitions that autoconf declares. Hence, config.h needs to
be included as the first header in each file.
This is done either via:
1. Including "common.h" (i3bar)
2. Including "libi3.h"
3. Including "all.h" (i3)
4. Including <config.h> directly
Also remove now-unused I3__FILE__, add copyright/license statement
where missing and switch include/all.h to #pragma once.
This commit probably comes as a surprise to some, given that one of i3’s
explicitly stated goals used to be “Do not use programs such as
autoconf/automake for configuration and creating unreadable/broken makefiles”.
I phrased this goal over 7 years ago, based largely on a grudge that I
inherited, which — as I’ve realized in the meantime — was largely held against
FOSS in general, and not actually nuanced criticism of autotools.
In the meantime, I have come to realize that the knee-jerk reaction of “I could
do this better!” (i.e. writing our own build system in this particular case) is
usually misguided, and nowadays I strongly suggest trying hard to fix the
existing system for the benefit of all existing and future users.
Further, I recently got to experience the other side of the coin, as I packaged
a new version of FreeRADIUS for Debian, which at the time of writing used
autoconf in combination with boilermake, a custom make-based build system that
only FreeRADIUS uses. Understanding the build system enough to fix issues and
enable parallel compilation took me an entire day. That time is time which
potentially every downstream maintainer needs to invest, and the resulting
knowledge cannot be applied to any other project.
Hence, I believe it’s a good idea switch i3 to autotools. Yes, it might be that
particular features were easier to implement/understand in our custom
Makefiles, and there might be individuals who have an easier time reading
through our custom Makefiles than learning autotools. All of these
considerations are outweighed by the benefits we get from using the same build
system as literally thousands of other FOSS software packages.
Aside from these somewhat philosophical considerations, there’s also practical
improvements which this change brings us. See the “changes” section below.
┌──────────────────────────────────────────────────────────────────────────────┐
│ new workflow │
└──────────────────────────────────────────────────────────────────────────────┘
You can now build i3 like you build any other software package which uses
autotools. Here’s a memory refresher:
autoreconf -fi
mkdir -p build && cd build
../configure
make -j8
(The autoreconf -fi step is unnecessary if you are building from a release
tarball, but shouldn’t hurt either.)
┌──────────────────────────────────────────────────────────────────────────────┐
│ recommended reading │
└──────────────────────────────────────────────────────────────────────────────┘
I very much recommend reading “A Practitioner's Guide to GNU Autoconf,
Automake, and Libtool” by John Calcote (https://www.nostarch.com/autotools.htm).
That book is from 2010 and, AFAICT, is the most up to date comprehensive
description of autotools. Do not read older documentation. In particular, if a
document you’re reading mentions configure.in (deprecated filename) or
recursive make (now considered harmful), it’s likely outdated.
┌──────────────────────────────────────────────────────────────────────────────┐
│ changes │
└──────────────────────────────────────────────────────────────────────────────┘
This commit implements the following new functionality/changes in behavior:
• We use the AX_ENABLE_BUILDDIR macro to enforce builds happening in a separate
directory. This is a prerequisite for the AX_EXTEND_SRCDIR macro and building
in a separate directory is common practice anyway. In case this causes any
trouble when packaging i3 for your distribution, please let me know.
• “make check” runs the i3 testsuite.
You can still use ./testcases/complete-run.pl to get the interactive progress
output.
• “make distcheck” (runs testsuite on “make dist” result, tiny bit quicker
feedback cycle than waiting for the travis build to catch the issue).
• “make uninstall” (occasionally requested by users who compile from source)
• “make” will build manpages/docs by default if the tools are installed.
Conversely, manpages/docs are not tried to be built for users who don’t want
to install all these dependencies to get started hacking on i3.
• non-release builds will enable address sanitizer by default. Use the
--disable-sanitizers configure option to turn off all sanitizers, and see
--help for available sanitizers.
• Support for pre-compiled headers (PCH) has been dropped for now in the
interest of simplicitly. Maybe we can re-add it later.
• coverage reports are now generated using “make check-code-coverage”, which
requires specifying --enable-code-coverage when calling configure.
┌──────────────────────────────────────────────────────────────────────────────┐
│ build system feature parity/testing │
└──────────────────────────────────────────────────────────────────────────────┘
In addition to what’s described above, I tested the following features:
• “make install” installs the same files (plus documentation and manpages)
cd i3-old && make install PREFIX=/tmp/inst/old
cd i3-new && ./configure --prefix=/tmp/inst/new
cd /tmp/inst
(cd old && for f in $(find); do [ -e "../new/$f" ] || echo "$f missing"; done)
• make dist generates a tarball which includes the same files
cd i3-old && make dist
cd i3-new/x86_64-pc-linux-gnu && make dist
colordiff -u <(tar tf i3-old/i3-4.12.tar.bz2 | sort) \
<(tar tf i3-new/x86_64-pc-linux-gnu/i3-4.12.tar.gz | sort)
There are some expected differences:
• Some files have been renamed (e.g. the new etc/ and share/ subdirectories)
• Some files will now be generated at build-time, so only their corresponding
.in file is shipped (e.g. testcases/complete-run.pl)
• The generated parser files are shipped in the dist tarball (they only
depend on the parser-specs/* files, not on the target system)
• autotools infrastructure is shipped (e.g. “configure”, “missing”, etc.)
• DLOG and ELOG statements still produce the same file name in logfiles
• Listing source code in gdb still works.
• gdb backtraces contain the i3-<version> path component
• release.sh still works
• version embedding
1. git checkout shows “4.12-136-gf720023 (2016-10-10, branch "autotools")”
2. tarball of a git version shows “4.12-non-git”
3. release tarball shows 4.13
• debug mode is enabled by default for non-release builds
• enabling verbose builds via V=1
┌──────────────────────────────────────────────────────────────────────────────┐
│ speed │
└──────────────────────────────────────────────────────────────────────────────┘
There is no noticeable difference in compilation speed itself (of binaries,
documentation and manpages):
i3-old $ time make all docs mans -j8
make all docs mans -j8 28.92s user 2.15s system 640% cpu 4.852 total
i3-new $ time make -j8
make -j8 27.08s user 1.92s system 620% cpu 4.669 total
In terms of one-time costs:
configuring the build system (../configure) takes about 2.7s on my machine,
generating the build system (autoreconf -fi) takes about 3.1s on my machine.
┌──────────────────────────────────────────────────────────────────────────────┐
│ m4 macros │
└──────────────────────────────────────────────────────────────────────────────┘
All files in m4/ have been copied from the autoconf-archive package in version
b6aeb1988f4b6c78bf39d97b6c4f6e1d594d59b9 and should be updated whenever they
change.
This commit has been tested with autoconf 2.69 and automake 1.15.
Some tray clients such as VLC use override_redirect on their tray window. As per
specification this means i3bar won't receive a ConfigureRequest, but instead a
ResizeRequest will be triggered. If not selected, the X server will simply confirm
the request which leads to a broken tray window size.
This commit selects and handles the event just like a configure request is handled.
fixes#2494
The idea was to ensure the symbol would always be present. For that, we need
__attribute__((used)), not __attribute__((unused)). Further, ensure the
variable has static storage, as the used attribute only applies to variables
with static storage. See also http://stackoverflow.com/a/29545417/712014
We strive to avoid conditional compilation in i3 as much as possible.
cairo and pangocairo have been around long enough in the versions that
we need that it’s time to unconditionally depend on them.
Also update DEPENDS with the last-known-good-versions while at it.
We call scratchpad_show() on _NET_ACTIVE_WINDOW requests if the request
came from a pager. This is consistent with the i3 »focus« command because
we assume the user requested to see the window, so we do the only
sensible thing.
fixes#2455
When receiving an ENTER_NOTIFY event on a dock client we returned as to not
focus the dock client (cf. #321 and #323). However, we still need to check
for crossing output boundaries and if that happened focus the new output.
Otherwise it can happen that the cursor is on a different output than the
focused output. When opening a window, this would open it on the old output
and then warp the mouse there. This effect will be even worse if the window
is immediately moved with 'move position mouse' as the window will end up
in its correct position on the new output and the cursor warped to the old
output.
relates to #2081
We add $HOME to the environment variables we define for a test case
in order to redirect it from the user's actual home directory. This
is necessary because xcb-util-xrm will fall back to $HOME/.Xresources
when determining the DPI. If a user has this set to, e.g., 192 on their
machine, this would break tests.
Since tests shouldn't rely on the system they run in, we redirect the
home directory altogether to simulate a clean slate.
relates to #2465
When I3SOCK is present, socket_path might be a pointer to an
environment variable, which cannot be free'd in line 157. This
commit duplicates the string if I3SOCK is present, thus making
socket_path a free-able pointer again.
…instead of lexicographically sorting strings, which fails for the
following situation:
4.12-96-g086276b
4.12-97-g59c070b
4.12-108-gb850cfb
This bug resulted in new packages being built and uploaded, then
immediately deleted.
Thanks to eeemsi for reporting the issue.
This commit correctly handles colormaps by
* Using the static default colormap we determine on startup if the
con has the corresponding depth. This avoids creating pointless
colormaps.
* Not freeing the default colormap to not have stray colormaps on
containers. This fixes an issue with certain programs such as xwd.
* Creating a custom colormap when necessary and freeing it when the
container is killed.
fixes#2435
Before this commit, i3 only compared the user-specified modifiers and
incorrectly ignored the resolved modifiers (such as the numlock
fallback).
While at it, also fix the testcase which treated numlock as a momentary
modifier, whereas it really is a latched modifier.
fixes#2418
Previously, we always discarded the NumLock bit when looking up key
bindings for key press events, and we always grabbed every keycode with
and without the NumLock modifier.
With this commit, the NumLock bit is no longer discarded: since the
previous commit 3bd5e6e5c8 we can
correctly look up key bindings with/without the NumLock bit, as both
variants are stored in |keycodes_head|.
Further, before adding the NumLock fallback (resulting in grabbing the
keycode with the NumLock modifier), we now check whether the key has the
same meaning when NumLock is enabled. This correctly distinguishes the
KP_End vs. KP_1 case, i.e. one can now use the following key bindings:
# No longer accidentally triggered when pressing KP_1.
bindsym KP_End nop KP_End
# Properly distinguished now:
bindsym KP_End nop KP_End
bindsym Mod2+KP_1 nop KP_1
fixes#2346
since OpenBSD pthread does not support pthread_condattr_setpshared().
This patch could also stay in the OpenBSD ports tree or depend on a
configure test macro rather than defined __OpenBSD__.
Prior to this commit a binding specifying only --whole-window would
trigger even when clicking on the window border. However, this should
only happen if --border is specified.
fixes#2348
Use case:
* When managing multiple terminals in a workspace, the borders makes it easier
to know where the focus is, but when there is only one it's obvious where the
focus is.
* When there's only a web browser for example, the borders are actually counter-
productive since it makes clicking a side scrollbar or a tab a bit harder (if I
smash my cursor to the side or the top of the workspace, I have to move it in
the other direction by just a few pixels to be able to grab it)
Behaviour:
* No borders when there's a single window in a workspace
* Borders when there are multiple windows in a workspace
fixes#2188
This patch introduces a new 'set_from_resource' config directive which
allows defining a variable by retrieving its value from the X resource
database. This avoids having to configure a color scheme in multiple
files. The directive takes an additional fallback value which is used
in case the resource cannot be found or during config validation where
no X connection is available.
Furthermore, this patch includes the following changes:
- If the same variable is defined twice, we now properly overwrite the
value of the assignment rather than inserting two variable definitions
with the same key.
- We now depend on xcb-util-xrm to query the resource.
- Increase the buffer size for variable / resource assignments.
fixes#2130
If an output is disabled during a restart, for example because a binding
such as
bindsym $mod+Shift+r exec "xrandr --auto", restart
is used, it can happen that we first write the layout to disk and only
then receive the RandR change events. This leads to a situation where
the restored tree will contain these outputs, but the restarted i3
process will not receive the RandR events, thus the internal output in i3
is marked disabled.
This patch finds these cases after a restart and force-disables the
affected outputs.
fixes#2326
In most cases this won't make a difference, but consider the following
scenario:
* Some application acquires input focus on its own (which the window manager
is not involved in, so it will "always" work).
* Before the FocusIn / FocusOut events are processed by i3, the
workflow to push X changes is run, resulting in xcb_set_input_focus()
being called.
Using XCB_CURRENT_TIME, this means i3 will "win" and override the focus,
even though it simply wasn't aware (yet) that focus had already been taken
over by someone else. When processing the FocusIn / FocusOut events, i3
assumes that the focus is already set which results in a broken focus
state as i3 assumes some container has the input focus when it doesn't.
With the new behavior, i3's attempt to set the input focus will fail if
the FocusIn / FocusOut events have not yet processed. Once they are processed,
the focus state will be automatically corrected.
fixes#2322
This code has been neutralized for many years now and served no purpose
other than cluttering up the code. We obviously don't need it and it's
out of date anyway.
If there's ever any reason to restore (parts of) it, we have git for
that. But we don't need to keep commented out code around.
This commit removes the title indentation in certain nested container
situations. The behavior was considered broken as it didn't seem to
make sense and it was unclear why this was introduced.
Given that nobody on i3-discuss@ complained about removing this logic
within two weeks, we are now removing it to make the title rendering
code a little less complex.
fixes#2247
This commit fixes two issues:
* We detect the EWMH support window from the root window. If this window
currently has the input focus, we ignore this. We do this because this
window is not a window the user is aware of and positioning relative to
it makes no sense.
* We also detect whether the current input focus is in an i3-frame window.
This can happen, e.g., when selecting a parent (split) container. Since
frame windows are direct children of the root window, we must not
translate its coordinates or we get weird results and i3-input ends up
off-screen (see #2312). For all other windows, including those without
any WM_CLASS, we proceed as before.
fixes#2312
When allowing multiple marks on a container, we renamed the "mark"
field to "marks". This breaks i3-save-tree which will now filter out
the marks on a window because it doesn't match anymore. This commit
fixes that issue.
Thanks to /u/xenomachina for hinting to this issue.
Since we don't actually stop drawing a title (or marks) with the
distance of the border width on the right side, but instead with
a hard-coded two pixel distance, we can only redraw that much of
the border without potentiall cutting off text.
relates to #2247
Use `uintptr_t` to cast the con id to int instead of `long int`. This
type is guaranteed to hold the pointer as an int regardless of platform.
fixes#2283
Previously we counted the number of (direct) children of the workspace to
decide whether no_focus should be applied or not. However, this doesn't
work correctly if there's a single container with multiple windows on the
workspace.
This patch correctly counts all windows on the workspace.
fixes#2292
This is a followup to #2049. While we had fixed that bug by only grabbing
buttons 4 and 5 if there is a whole-window binding for that button, this
did not consider buttons higher than 5 as found on many mice.
Therefore, we now ditch the special handling for scrollwheel buttons and
instead do the same for all buttons higher than 3.
fixes#2271
The resulting packages are pushed to Debian repositories hosted on
bintray.com.
This is the first step to move away from our custom buildbot setup (see
https://i3wm.org/docs/buildbot.html for details on that) towards
infrastructure which is more standard (travis) and in the open.
With this change, multi-monitor presentations (e.g. as implemented by
LibreOffice Impress) work out of the box. Previously, one had to move
the presentation windows to the right outputs oneself.
If a user reloads the config while in some binding mode, the binding mode
will revert to the default, but no event will ever be fired, causing a
broken i3bar mode display.
This patch explicitly reverts to the default binding mode before reloading
the config. We reload rather than switch to the binding mode after having
reloaded the config because there's no guarantee that mode will even still
exist.
fixes#2228
This patch correctly determines the previously focused workspace on the
target output when moving a workspace to another output. Before, we used
nodes_head for this, which will not actually return the previously focused
workspace, but just the first workspace on that output. Hence, we now use
focus_head instead.
This bug was introduced all the way back in 1e143fea when the feature of
moving workspaces to another output was first implemented.
fixes#2229
This patch introduces a proprietary atom I3_FLOATING_WINDOW which will be
set and maintained for floating windows and removed on tiling containers.
This allows users to select on this atom, e.g., in their compositor
configuration or in utility scripts (without using the IPC).
fixes#2223
Manually updating a magic number doesn’t work in the long run.
With this change, the number of atoms contained in
include/atoms_NET_SUPPORTED.xmacro is used.
fixes#2230
This commit removes an unnecessary fallback to the first output's name as
this name ("first") will only be used to see whether "tray_output none"
has been specified, anyway.
We also add documentation that clearly states when we want to initialize
the tray and when we don't want to do the same.
relates to #2220
This commit removes the code for falling back to the first available
output for the system tray if 'tray_output primary' has been specified
but there is no primary output (managed by this bar).
This fallback behavior was broken/unreachable because the tray
will never be initialized in this situation in the first place. Having
this dead code lead to a wrong assumption in #1855 and hence to
commit e2e7b70d00, which makes the
system tray not show up for many users when first installing i3.
Thanks to @rtlanceroad for reporting this issue.
fixes#2220
This is essentially a revert of daf00a9 which introduced a mechanism
to float workspace containers by wrapping all children into a new
container and floating it.
This caused a bug and there's no good reason (anymore) to allow doing
this in the first place as we don't support floating nested containers.
fixes#2166
This allows "modifier none" (and "modifier off") for the bar config
in order to disable the modifier key altogether. This is useful
for users who use a different approach to hiding / showing the bar,
e.g., a custom keybind that involved multiple keys or scripts.
fixes#2208
Until now, only the config directive for borders (new_window,
new_float) respected the DPI setting (using logical_px). This
patch makes sure we also do so for runtime "border" commands.
fixes#2202
We now build a docker base container based on debian sid (where the very
latest packages are available). That base container is updated once a
month, or whenever travis-build.Dockerfile or debian/control change, but
re-used for subsequent travis runs. While the initial build might take
up to 15 minutes, subsequent builds typically run in a minute or two.
All the different steps that we run on travis are now factored into
separate scripts in the travis/ directory.
Switching to docker should also help with issue #2174.
Ignoring the focus leads to a broken focus if the pointer is, e.g.,
over i3bar at the point in time the window is moved by the client
message. It also causes i3bar's workspace display to break.
Thanks to GermainZ for reporting.
We don't actually need to grab the buttons to fix#2097, but doing so
will cause a freeze due to unreleased events.
We partially revert 6f12f02 which avoids the freeze, but doesn't break
functionality.
relates to #2097fixes#2168
We already claim _NET_WM_DESKTOP support in _NET_SUPPORTED since around 2009,
but haven't actually done anything with it. However, especially pagers like
gnome-panel rely on this property to be updated and many tools, like GTK, want
to use the corresponding client messages to make a window sticky, move it
around etc.
This patch implements full support according to the EWMH spec. This means:
* We set the property on all windows when managing it.
* We keep the property updated on all windows at all times.
* We read and respect the property upon managing a window if it was set before
mapping the window.
* We react to client messages for it.
* We remove the property on withdrawn windows.
Note that the special value 0xFFFFFFFF, according to the spec, means that the
window shall be shown on all workspaces. We do this by making it sticky and
float it. This shows it on all workspaces at least on the output it is on.
Furthermore, the spec gives us the freedom to ignore _NET_WM_DESKTOP when
managing a window if we have good reason to. In our case, we give window
swallowing a higher priority since the user would likely expect that and we
want to keep placeholder windows only around for as long as we have to.
However, we do prioritize this property over, for example, startup
notifications.
fixes#2153fixes#1507fixes#938
pledges for i3:
"stdio rpath unix" for talking to the i3 socket usually in /tmp
"proc exec" for executing programs
"wpath cpath" are needed for the restart-in-place functionality
To make this work, @semarie pointed out that it is sufficient to ensure
that we get physical_mem_bytes only once, namely in init_logging().
pledges for i3-msg:
"stdio rpath unix" are needed for talking to the i3-socket
pledges for i3-nagbar
"rpath getpw" to find the home directory
"wpath cpath" to write the script
"proc exec" to execute the script
This disables the default leak-check-on-exit behavior which reports a
bunch of leaks that are only leaks while exiting, at which point they
don’t matter, because the operating system will clean up the memory our
process used.
This prevents the following linker warning (only when compiling with
-fsanitize=address):
/usr/bin/ld: Warning: size of symbol `DEFAULT_BINDING_MODE' changed
from 8 in src/resize.o to 64 in src/bindings.o
The newly introduced decoration_border color incorrectly uses the default value
for "background" as a fallback when not specified. Instead, it should use the
user-specified "background" as a fallback.
fixes#2149
Commit 287a0b4 introduced a segfault when validating the i3 config
as the root_screen will not be set in this case, causing a null
pointer dereference.
fixes#2144
This patch moves the title_format information from windows to containers.
Furthermore, it allows correctly setting it on window-less containers and
displays the title accordingly for split containers.
We now also dump and read title_format in GET_TREE / during restarts.
fixes#2120
Re-introduce fully-fledged get_colorpixel function, which enables arbitrary
color depths for the display. The previous code is kept as an optimization for
the case of a true color display, where a X11 roundtrip is unnecessary.
Corrects the cases where the colorpixel is not 0xRRGGBB : we have to
use the full color_t struct to describe font colors, as Pango expects
RGB values and not an XCB colorpixel value.
According to the User's Guide [1], an `assign` command allows a
`workspace` token after the selector, as an alternative or in addition
to the unicode arrow `→`. In reality, however, the `workspace` token is
not recognized.
Example:
assign [class="Firefox"] workspace "1: Browser"
should assign Firefox windows to workspace `1: Browser`, but the the
browser window appears on a new workspace called
`workspace "1: Browser"` instead.
With this fix, both `→` and `workspace` are recognized (and ignored)
after the selector.
[1] https://i3wm.org/docs/userguide.html#_automatically_putting_clients_on_specific_workspaces
We now execute the validations when "kill" is executed even if match
criteria are used. This prevents users from killing workspace containers,
which instead kills all clients (as before when not using criteria).
fixes#1761
It should be clear for callers of this function that this is an internal
function that skips certain validations which might be important. Therefore
we make it clear that this is an internal function by renaming it.
relates to #1761
We need to move the urgent flag when moving a container across
workspaces before calling on_remove_child on the parent in order
to avoid a crash.
fixes#2128
Even if the X11 root window cursor is not set up correctly for some
reason, with this fix, users should at least see the correct cursor when
the pointer is over i3bar.
see issue #2114
This fixes race conditions, for example when i3bar gets reconfigured
after the available outputs change. In that specific case, i3bar sends a
ConfigureWindow request (see
b5693d6fb3/i3bar/src/xcb.c (L376))
which normally is turned into a ConfigureRequest that i3 largely
ignores, only the dock client’s height is considered (see
b5693d6fb3/src/handlers.c (L390)).
Turning ConfigureWindow into ConfigureRequest is only done when the
SubstructureRedirect event mask is set, and because we temporarily
removed _all_ events from our mask, the ConfigureWindow request went
through unmodified.
This in turn lead to the i3bar client window (not its decoration frame)
being positioned at e.g. y=1304, whereas dock client windows should
always end up at x=0 y=0 within their decoration frame. The result of
the i3bar client window being out of the visible space was either a
black i3bar or graphics corruption.
This also fixes issue #1904, I think. I couldn’t reproduce issue #1904
specifically, but when i3bar is in the misconfigured state, it will
receive a VisibilityNotify event, telling i3bar that it is obscured.
This would explain why i3bar sent a SIGSTOP in issue #1904.
fixes#1904
Previously, if a match specification contained the con_id or con_mark criterion,
all other criteria were ignored. However, a user may want to specify one of
those two unique identifiers and still specify others as well, for example to
match the currently focused window, but only if it has a certain WM_CLASS:
[con_id=__focused__ class=special] kill
We now check all specified criteria.
fixes#2111
This commit fixes#1969 by adding support for matching a window's type
against _NET_WM_WINDOW_TYPE_NOTIFICATION. The userguide and tests were
updated to reflect this change.
Previously, mouse bindings could only be run when a window was present,
by using --whole-window. Such bindings would not work on empty
workspaces. However, this is a valid usecase for bindings like
bindsym $mod+button4 workspace prev
bindsym $mod+button5 workspace next
Hence, we need to grab the root window as well and run bindings on it.
fixes#2097
Previously, using a command like
[con_id=foo] kill
would kill the currently focused window because while an error for
not being able to parse the con_id was logged, no further action
was taken, which caused the criterion to be ignored. In this case,
the fallback behavior of using the focused window took over.
For con_id, id and window_type we now reject incorrect values with
an error and abort the command.
fixes#2091
We now only log an error but do not exit when creating the graphics
context fails. While, if this happens, rendering will likely be wrong,
this is still better than terminating the user's session entirely due
to a rendering problem, potentially causing data loss.
relates to #2094
The values of a Rect are unsigned, but can contain signed values.
Using MAX when the value is negative causes incorrect behavior and
makes the result stay negative, which is what we wanted to avoid here
in the first place.
Fix by properly casting the value for the comparison.
fixes#2094
If a window with border is set to "border none" and then closed, we would
call cairo_destroy / cairo_surface_destroy twice, causing an assertion
failure in cairo as the objects already had zero references the second
time. We fix this by explicitly setting these objects to NULL.
relates to #1278
With this patch, we use 32-bit visuals per default whenever it is
available. Otherwise, we fall back to the actual root window's
depth, which will typically be 24-bit.
Before this patch, we already used 32-bit depth for containers with
a window that uses 32-bit. However, this means that we didn't use
32-bit for split parent containers on which decoration is drawn.
For 32-bit windows using transparency, this caused a graphical glitch
because the decoration pixmap behind it would show through. This
behavior is fixed with this change.
relates to #1278
Such containers never require a pixmap anyway. In particular for the __i3
output (used for the scratchpad workspace), this would cause an allocation
error anyway because it can be very big -- so big, in fact, that X cannot
allocate the pixmap for it.
Until now, this error was silently ignored due to the fact that we did not
create the pixmap checked (and asserted its success), but with cairo this
would cause a crash because we'd try to create a surface for a pixmap
which doesn't exist.
relates to #1278
With this patch we remove the temporary draw_util_colorpixel_to_color
function we introduced previously by parsing the colors as color_t to
begin with.
relates to #1278
We return early from drawing functions if the surface to draw to is not
initialized properly. There is no immediate need to do so, at least no
crashes have been observed, but it mirrors the previous behavior a bit
more closely. Furthermore, i3 should not crash due to not being able to
make some rendering call, so this provides some stability.
relates to #1278
This patch migrates all decoration rendering of i3 to cairo. Using the
compile switch CAIRO_SUPPORT, rendering can be switched back to the
previous XCB behavior, just like with the previous migration to cairo
in i3bar.
This patch also fixes a bug in draw_util.c where copying one surface
to another would use incorrect coordinates if the source coordinates
are not 0, 0.
Furthermore, this patch implicitly fixes some minor issues in the
decoration rendering which would be ignored previously due to the fact
that errors would only show up in the event queue, but not cause the
rendering code path to crash. One example is zero-height pixmaps which
are not allowed. Using cairo, these would cause i3 to instantly segfault,
so this patch avoids this.
Lastly, this patch annotates other issues found but not fixed in this patch
using TODO comments, e.g., the zero-height check not working correctly
and the comment that it should probably work the same way for zero-width
pixmaps.
relates to #1278
This patch fixes a bug when copying one surface to another.
Since it only exposes itself when used with non-trivial source
coordinates, it didn't surface before when only used for i3bar.
relates to #1278
In order to prepare for using cairo for rendering i3 decorations,
we need to make the draw_util.c from i3bar available via libi3 such
that both i3bar and i3 can use it.
relates to #1278
Mouse bindings that target the window that was clicked send the command
to the parser with `con_id` of the clicked window serialized base 16
for compatability with FreeBSD. See 7c2842e for explaination.
Set base to 0 for strtol to handle base 16 numbers for that reason.
This allows mouse bindings that target specific windows to work
correctly. Without this change, the focused window is always targetted
rather than the window that was actually clicked.
Regression introduced in b744c5e.
With this patch, we support the special value "0" for _NET_WM_USER_TIME
on a window upon managing it, which indicates that the window shall not
be focused.
fixes#2064
This reverts commit 9692c1498b.
That commit accidentally defaulted to group mask 1, but the default
should be to match any group mask, so that having multiple layouts
loaded at the same time works.
fixes#2062
With this patch, we only grab the scrollwheel buttons (4 and 5) when
managing a window if a whole window key binding exists for these buttons.
This allows both of these usecases:
- Bindings to scrollwheel buttons using --whole-window (see #1701).
- Scrolling in a window without focusing it if no such binding
exists (see #2049).
Furthermore, we drop all button grabs and regrab them after a config
reload in order to reevaluate the new bindings correctly.
fixes#2049
We refactor the button grabbing into a function to allow the next patch
both to
- conditionally grab different sets of buttons
- grab the buttons again when reloading the config.
relates to #2049
With the recent cairo bugfix, we can now switch to using cairo for
rendering i3bar per default by raising the minimum version of cairo
to 1.14.4, if this cairo version is available.
resolves#2048
As there is no need to keep autostart commands in memory, we can safely
remove them as soon as they have been executed. As we previously didn't
clear them at all during config reloads, this also fixes a memory leak.
Note that neither autostarts nor autostarts_always is executed during
config reloads, so removing them from memory is fine as an i3 restart
will cause them to be parsed again.
fixes#2044
1. i3 config validation failed when the new line is missing from the end of file.
The error was: "ERROR: Your line continuation is too long, it exceeds 4096 bytes".
It is wrong to assume that there is always a '\n' at the end of each line in the config file.
(Not for the last line.)
Fix it via adding a end-of-file check.
2. See the issue #2051. (https://github.com/i3/i3/issues/2051)
This patch introduces the possibility to specify the tray_output directive
multiple times. All values will be used by i3bar, in the order they are
given.
This way, a single bar configuration can be used for several machines with
internal output names "eDP1" and "LVDS-0" by specifying tray_output for both.
Any external output (e.g., "DP-0") will still not receive the tray. The same
effect can be achieved by using "primary", but forces the user to couple the
tray display to the primary output which may not be desirable behavior.
relates to #555
Since splitting a docking container was allowed and successful, the check
to prevent floating it fails to work. This causes a crash because the
workspace of the container cannot be determined as the dockarea is higher
up in the tree than the workspace it belongs to.
This patch extends to sanity check to nested dock containers when trying to
float a container and also disallows manually splitting a docked container
or changing its layout.
fixes#2034
We need to store the information that an assignment was run for a window
before actually executing the command. Otherwise, if the command causes
a change that causes assignments to be run again, the window might be
matched again, causing an infinite loop and hence i3 to freeze or crash.
Assignments don't necessarily represent workspace assignments, but could
also be used, e.g., for no_focus. Hence, there's no point in logging
dest.workspace for all assignments.
- Render key names and key bindings verbatim if they could be used like
that in the configuration (no special format for "colloquial" names:
Alt, Windows, ...)
- Use only lower case letters for key bindings
In some cases the IDs of section titles was placed after the section
title. With that in the rendered HTML the ID was placed on the paragraph
and not on the heading. This led to heading not being shown when the
corresponding link was clicked.
The headline indicated that it would be possible to move containers and *workspaces* to marks but the following text clearly shows that it should state containers and *windows*.
When a window is moved to a mark and the marked container is a workspace,
we can skip any other logic and just call con_move_to_workspace directly.
fixes#2003
With this patch, the no_focus directive will be ignored if the
to-be-opened window is the first on its workspace as there's no
reason the user would not want to focus it in this case.
This improves usability when, for example, using a tabbed
workspace_layout.
fixes#1987
This patch extends the previously introduced flag --no-auto-back-and-forth
to also apply to
move window to workspace <name>
move window to workspace number <number>
relates to #2028
Since splitting a docking container was allowed and successful, the check
to prevent floating it fails to work. This causes a crash because the
workspace of the container cannot be determined as the dockarea is higher
up in the tree than the workspace it belongs to.
This patch extends to sanity check to nested dock containers when trying to
float a container and also disallows manually splitting a docked container
or changing its layout.
fixes#2034
We need to store the information that an assignment was run for a window
before actually executing the command. Otherwise, if the command causes
a change that causes assignments to be run again, the window might be
matched again, causing an infinite loop and hence i3 to freeze or crash.
Assignments don't necessarily represent workspace assignments, but could
also be used, e.g., for no_focus. Hence, there's no point in logging
dest.workspace for all assignments.
Suppose a horizontally oriented workspace has two windows open. Issuing "split h" on
the right window creates a nested horizontal container. If we now resize in "width"
direction, the resize doesn't work because it will only operate on the current parent,
which is a container with only one child, so the resize command exits.
This is unexpected behavior from a user point of view. Hence, with this patch, we
ensure that we don't just go up the tree until we find a parent with the correct
orientation, but also keep going if that parent has only a single child.
fixes#2015
This patch introduces the --no-auto-back-and-forth flag to both of
workspace --no-auto-back-and-forth <name>
workspace --no-auto-back-and-forth number <number>
This flag will only have an effect if the back_and_forth feature is
enabled. If passed, the feature will be ignored for this particular
call only.
fixes#2028
This patch adds two new status block keys, background and border, which
define the respective colors for the status block. If not specified, the
current behavior is kept, e.g., no background / border will be drawn.
If the status block is marked urgent, the urgent color is prioritized.
fixes#2022
This allows matching with
[con_id=__focused__] unmark
for commands that do not default to operating on the focused window
if no criteria have been specified (such as unmark).
relates to #2014
This patch allows using 'unmark' on matched windows. The old behavior
of applying it to all windows if no criteria were specified is kept.
relates to #2014
In order to keep compatibility to before allowing multiple marks on a window,
we introduce a flag "--add" that must be set to put more than one mark on a
window. The default, which is also available as "--replace", keeps the old
behavior of overwriting a mark when setting a new one.
fixes#2014
This patch allows multiple marks to be set on a single window. The restriction that a mark may
only be on one window at a time is still upheld as this is necessary for commands like
"move window to mark" to make sense.
relates to #2014
- Render key names and key bindings verbatim if they could be used like
that in the configuration (no special format for "colloquial" names:
Alt, Windows, ...)
- Use only lower case letters for key bindings
In some cases the IDs of section titles was placed after the section
title. With that in the rendered HTML the ID was placed on the paragraph
and not on the heading. This led to heading not being shown when the
corresponding link was clicked.
The headline indicated that it would be possible to move containers and *workspaces* to marks but the following text clearly shows that it should state containers and *windows*.
When a window is moved to a mark and the marked container is a workspace,
we can skip any other logic and just call con_move_to_workspace directly.
fixes#2003
See the issue #1798 (http://github.com/i3/i3/issues/1798).
+workspace_next+ as-is cycles through either numbered or named workspaces,
but when it reaches the last numbered/named workspace, it only looks for
named workspaces. This commit changes it: look for named workspaces after
exhausting numbered ones, but also for numbered ones after exhausting
named ones.
Also add a test case 528-workspace-next-prev.t (numbered workspaces and named
workspaces on 2 outputs) for testing this.
This commit restores the old XCB drawing code paths while keeping the
cairo drawing available via a compile-time switch (I3BAR_CAIRO). This
is necessary as cairo currently has a bug that breaks i3bar for users
without the RENDER extension, which might be the case, e.g., for VNC
users.
For more context, see #1989 and the discussions about its fix. Once the
cairo fix is available in a stable release, i3 can depend on that version
and remove the XCB drawing code paths.
fixes#1989
This commit refactors the i3bar drawing code to also define an abstraction
function for clearing a surface. This is needed to fully abstract i3bar/xcb.c's
drawing code so that we can introduce a switch to easily exchange the
underlying drawing mechanism.
This introduces the flag "--pango" on the mode config directive to
explicitly enable pango markup for mode names. Not setting this will
cause the mode name to be rendered as is.
This fixes a regression in 4.11 where mode names containing characters
such as '<' would break user's configs as they didn't escape these
characters.
fixes#1992
With this patch, the no_focus directive will be ignored if the
to-be-opened window is the first on its workspace as there's no
reason the user would not want to focus it in this case.
This improves usability when, for example, using a tabbed
workspace_layout.
fixes#1987
Since libi3 currently creates its own cairo surface for drawing text, we
need to mark our own surface as dirty to force cairo to invalidate its
cache. Otherwise, this will result in graphical glitches such as the text
not showing up at all.
This wrapper can be removed in the future when libi3 is adapted to reuse
the same cairo surface as we do for all other drawing operations.
We pass alpha channel information to the current text drawing code
and use it if it is available. The previous behavior of using full
opacity for RGB format colors is preserved.
This patch creates all necessary windows for i3bar with 32-bit visuals if available.
It also introduces the possibility to define RGBA colors (next to RGB colors), which
allows the user to set the opacity of any color. This requires running a compositor.
With this patch we also start supporting _NET_SYSTEM_TRAY_VISUAL, which is necessary
for the tray icons so they create the tray window with the correct depth and visual.
1). See the issue #1926. For example, the second keybinding is not detected as a duplicate:
bindcode Mod4+24 sticky toggle
bindsym Mod4+q focus parent
2). To fix it, check duplicated bindings when translating the keysym to keycodes.
`vlog()` can not handle log messages longer than 4096 bytes. However, the
message generated in `store_restart_layout()` is likely to exceed this
as it contains a long JSON string.
This has caused a few SEGFAULTS during restarts for me when running with
`-d all`.
Fix this by truncating the message to 4096 bytes and punching in a newline at
the end.
This fixes a bug I introduced in #1921. When restarting i3 in place a
stray workspace was created on the root_output during restart. On first
start, this workspace would have been moved to the first real and empty
output.
However, this does not produce the desired result during restarts when
workspaces are alread present on all real outputs. The stray workspace would
still be added to the first real output which already contains some
workspaces. Thus, adding a new empty workspace to it.
Fix this by delaying creation of the root output's workspace until it is
known whether the output is active or not.
Fixes#1940
This is necessary during a restart of i3 when restoring floating windows. In this situation, we restore the layout before setting up the RandR outputs which would set the window's size to 0, making it invisible.
Thanks to hwangcc23 and spudowiar for reporting.
fixes#1910fixes#1934
1. Reference: issue #1929
2. When restarting, add the argument "-d all" if debuglog is on.
3. Add add_argument() for adding/replacing the given argument.
This patch introduces a root output covering the root window. It is used
in two cases:
1. RandR is not available. In this case, the previous behaviour of
creating a single output covering the root window is preserved.
2. RandR is available, but there is no active output. In this case,
the root output is enabled and will be the only active output.
If any RandR output becomes available, the root output will be
disabled again. Existing mechanisms for migrating workspaces will
just work without modification.
I've carefully slipped in a global variable `Output root_output` representing
that output.
Fixes#926 and #1489
This commit also reworks the way focusing sticky windows is prevented by not focusing them temporarily at all, but preventing the focus in the first place.
If no other window is available on the active workspace, we now select the EWMH support window (used to indicate that an EWMH-compliant window manager is preent) as the focus window rather than the root window. The NET_WM_ACTIVE window will still be set to XCB_WINDOW_NONE to pretend that no window is actually focused.
This fixes the issue that when using the root window, a fallback mechanism in X11 takes effect which routes keyboard input to the window under the cursor, independent of whether that window has the input focus. Using the EWMH window instead, we can avoid this behavior. We cannot simply set it to XCB_WINDOW_NONE as this would discard all keyboard events, breaking keybindings.
fixes#1378
This reverts commit e71c304444.
It turns out that several users have workflows in which they turn off
their monitors without using e.g. `xrandr --output DP-1 --off`. The
result is that the monitors are disconnected, but not disabled.
With commit e71c304444, i3 started to see
these two states as one and the same state, but that causes more harm
than it does good. For example, for some users with only one monitor, i3
would just exit when these users turned off their monitor.
related to #1858, #1839fixes#1845
Reordering once (as we did it before this commit) would only sort the
bindings by the _first_ bit of their event_state_mask, but we need to
sort them by _all_ bits of their event_state_mask.
fixes#1870
fixes#1835
This commit improves the translation of keysyms to keycodes by loading
keymaps using libxkbcommon-x11 and using libxkbcommon for figuring out
the keymap, depending on each keybinding’s modifiers. This way, the
upper layers of complex layouts are now usable with i3’s bindsym
directive, such as de_neo’s layer 3 and higher.
Furthermore, the commit generalizes the handling of different XKB
groups. We formerly had support only for two separate groups, the
default group 1, and group 2. While Mode_switch is only one way to
switch to group 2, we called the binding option Mode_switch. With this
commit, the new names Group1, Group2 (an alias for Mode_switch), Group3
and Group4 are introduced for configuring bindings. This is only useful
for advanced keyboard layouts, such as people loading two keyboard
layouts and switching between them (us, ru seems to be a popular
combination).
When grabbing keys, one can only specify the modifier mask, but not an
XKB state mask (or value), so we still dynamically unbind and re-bind
keys whenever the XKB group changes.
The commit was manually tested using the following i3 config:
bindsym Group4+n nop heya from group 4
bindsym Group3+n nop heya from group 3
bindsym Group2+n nop heya from group 2
bindsym n nop heya
bindsym shift+N nop explicit shift binding
bindsym shift+r nop implicit shift binding
bindcode Group2+38 nop fallback overwritten in group 2 only
bindcode 38 nop fallback
…with the following layout:
setxkbmap -layout "us,ua,ru,de" -variant ",winkeys,,neo" \
-option "grp:shift_caps_toggle,grp_led:scroll" \
-model pc104 -rules evdev
By default (xkb group 1, us layout), pressing “n” will result in the
“heya” message appearing. Pressing “a” will result in the “fallback”
message appearing. “j” is not triggered.
By pressing Shift+CapsLock you switch to the next group (xkb group 2, ua
layout). Pressing “a” will result in the “fallback overwritten in group
2 only” message, pressing “n” will still result in “heya”. “j” is not
triggered.
In the next group (xkb group 3, ru layout), pressing “a” will result in
the “fallback” message again, pressing “n” will result in “heya”,
“j” is not triggered.
In the last group (xkb group 4, de_neo layout), pressing “a” will still
result in “fallback”, pressing “n” will result in “heya”, pressing “j”
will result in “heya from group 4”.
Pressing shift+n results in “explicit shift binding”, pressing shift+r
results in “implicit shift binding”. This ensures that keysym
translation falls back to looking at non-shift keys (“r” can be used
instead of ”R”) and that the order of keybindings doesn’t play a role
(“bindsym n” does not override “bindsym shift+n”, even though it’s
specified earlier in the config).
The fallback behavior ensures use-cases such as ticket #1775 are still
covered.
Only binding keys when the X server is in the corresponding XKB group
ensures use-cases such as ticket #585 are still covered.
This reverts commit e71c304444.
It turns out that several users have workflows in which they turn off
their monitors without using e.g. `xrandr --output DP-1 --off`. The
result is that the monitors are disconnected, but not disabled.
With commit e71c304444, i3 started to see
these two states as one and the same state, but that causes more harm
than it does good. For example, for some users with only one monitor, i3
would just exit when these users turned off their monitor.
related to #1858, #1839fixes#1845
With commit c738b2e454 we changed i3 so
that the default keybindings can be used when ISO_Next_Group is enabled,
but bindings which explicitly use Mode_switch have precedence. This
behavior required the use of bindcode instead of bindsym.
With this commit, when switching from group 1 to group 2 using
ISO_Next_Group, i3 will re-translate all keybindings (looking at column
2/3, regardless of whether the keybinding itself specifies Mode_switch)
and re-grab them.
That way, the keybinding “bindsym $mod+x nop foo” will work when
pressing $mod+x without Mode_switch and when pressing the corresponding
$mod+x (different key) with Mode_switch. A binding such as “bindsym
Mode_switch+$mod+x nop bar” will still have precedence.
The intention here is to make bindsym keybindings work well with dual
keyboard layouts (such as {dvorak, us} or {us, ru}), so that users can
switch between groups and still have their (logical) keybindings behave
the same way.
fixes#1775
Do not log an XCB_MOTION_NOTIFY event in handlers.c because this
clutters the log.
Only log in the motion notify handler if something important happens.
If I restart i3 4.10.2 twice, e.g. with
$ i3-msg restart; sleep 3; i3-msg restart
the second time I get the following two errors:
05/22/15 10:46:03 - ERROR: mkdir(/tmp/i3-theo.toAK7N) failed: File exists
05/22/15 10:46:03 - ERROR: Could not create "/tmp/i3-theo.toAK7N" for storing the restart layout, layout will be lost.
The first one is from mkdirp() in src/ipc.c and the second one is from
store_restart_layout() in src/util.c.
Notice that I do _not_ get the ``open()'' or ``Could not write restart layout to
...'' error messages, so the layout writing code after line 260 in
store_restart_layout() succeeded and the layout isn't actually lost. Thus,
these error messages are a bit misleading, especially the second one (which is
triggered by the failure of mkdirp()).
POSIX says about `mkdir -p':
``Each dir operand that names an existing directory shall be ignored without
error.''
Therefore, I suggest the following simple patch that makes mkdirp() succeed if
the named file exists and actually is a directory. This silences the second
error as well.
Try to detect base 16 numbers given to `con_id` and `id` for command criteria
by setting the base of strtol to 0. This should also detect octal.
This is necessary because mouse bindings now may be serialized as hex as of
5c32de4.
The comment immediately following implied that this was the intended
behaviour. Not doing so means that compound commands that both move a
window to a new workspace as well as do something that depends on the
workspace's geometry (e.g. 'move position center' or 'floating enable'
on a tiled window) would use the workspace's calloc'd 0x0+0x0 geometry.
Check if the `connection` of the randr output is
XCB_RANDR_CONNECTION_DISONNECTED and disable the output if it is.
This fixes an issue where the output would not be disabled if the output was
physically unplugged from the machine.
When InputHint is not in WM_HINTS (i.e., the flag is not set), treat the window
as if the InputHint was set (the default behavior). This means that i3 will
focus the window when it becomes managed.
fixes#1676
%p is equivalent to either %x or %lx, depending on the pointer size of the
platform. Before this commit, we always used %d, which has the same behavior
on Linux, but is not automatically expanded to %ld on e.g. FreeBSD.
fixes#1661
* common.mk: use -lsocket -liconv -lgen on Illumos/Solaris
* mkdirp: return int and accept a mode argument
* use i3's mkdirp on everything except Illumos
1. Allow to use the line continuation, which is indicated by \ before the new line character, in config files.
2. Add a new testcase "247-config-line-continuation.t" for
a). testing line continuation
b). making sure string escaping still works
c). testing line continuations within a string
b). testing line continuations with too many lines
If the match expression is a plain number (e.g., '99'), the number of a workspace will be compared strictly. Otherwise, the match expression is taken as a regular expression and compared against the workspace's name.
This allows all of the following:
for_window [workspace=5] ...
for_window [workspace="5:foo"] ...
for_window [workspace="foo"] ...
fixes#1769
Fix TODO in bindings.c.
There is no problem to use atoi here since either keycode 0 or button0 is invalid.
But strtol is more flexible and is recommanded for conversion.
The format string set with "title_format" can contain the placeholder "%title" which will be replaced with the actual window title.
By not overwriting window->name itself, we make sure that assignment matching still works as expected.
fixes#1723
If I restart i3 4.10.2 twice, e.g. with
$ i3-msg restart; sleep 3; i3-msg restart
the second time I get the following two errors:
05/22/15 10:46:03 - ERROR: mkdir(/tmp/i3-theo.toAK7N) failed: File exists
05/22/15 10:46:03 - ERROR: Could not create "/tmp/i3-theo.toAK7N" for storing the restart layout, layout will be lost.
The first one is from mkdirp() in src/ipc.c and the second one is from
store_restart_layout() in src/util.c.
Notice that I do _not_ get the ``open()'' or ``Could not write restart layout to
...'' error messages, so the layout writing code after line 260 in
store_restart_layout() succeeded and the layout isn't actually lost. Thus,
these error messages are a bit misleading, especially the second one (which is
triggered by the failure of mkdirp()).
POSIX says about `mkdir -p':
``Each dir operand that names an existing directory shall be ignored without
error.''
Therefore, I suggest the following simple patch that makes mkdirp() succeed if
the named file exists and actually is a directory. This silences the second
error as well.
* <xyz> denotes that some string must be used which is not a fixed value (e.g., a command), but a variable string (text, a number, ...)
* [xyz] denotes that the parameter is optional
* abc|xyz denotes that either abc or xyz must be given
Try to detect base 16 numbers given to `con_id` and `id` for command criteria
by setting the base of strtol to 0. This should also detect octal.
This is necessary because mouse bindings now may be serialized as hex as of
5c32de4.
* Motivate users to come up with clear and minimal instructions on how to reproduce a problem before submitting an issue.
* Encourage users to restart i3 before reproducing the problem so that the log file can stay small and noise-free.
* Mention the non-support of closed source software.
The comment immediately following implied that this was the intended
behaviour. Not doing so means that compound commands that both move a
window to a new workspace as well as do something that depends on the
workspace's geometry (e.g. 'move position center' or 'floating enable'
on a tiled window) would use the workspace's calloc'd 0x0+0x0 geometry.
When InputHint is not in WM_HINTS (i.e., the flag is not set), treat the window
as if the InputHint was set (the default behavior). This means that i3 will
focus the window when it becomes managed.
fixes#1676
%p is equivalent to either %x or %lx, depending on the pointer size of the
platform. Before this commit, we always used %d, which has the same behavior
on Linux, but is not automatically expanded to %ld on e.g. FreeBSD.
fixes#1661
If the user clicks on the very top of i3bar above a tray icon, i3bar might
mistakenly trigger the click event for the last status block. This is due to
the fact that the click detection considers the separator width of the block
even though on the last block this is ignored, incorrectly spanning the block's
width partially (or entirely) across the tray area.
Check if the `connection` of the randr output is
XCB_RANDR_CONNECTION_DISONNECTED and disable the output if it is.
This fixes an issue where the output would not be disabled if the output was
physically unplugged from the machine.
* Implement criterion specs just like it is done in the spec for the config
* Declare variables in test case early so the 'my' keyword can be dropped in the actual test cases
The Makefiles should put binaries in $(EXEC_PREFIX) and
architecture-independent files in $(PREFIX). Also a user may have a
prefixed- pkg-config, as in the case of cross compiling on Exherbo
Linux, so respect the well-accepted $(PKG_CONFIG) variable for this
purpose.
Outputs may disappear momentarily and come back later.
To prevent i3 from exit when no output is available momentarily, add a timeout delay_exit_on_zero_displays.
When `complete-run.pl` is given `--coverage-testing`, try to generate an
html coverage testing report for the run. This requires i3 to be
compiled with coverage testing support.
We only support unique marks, so looping over all matched windows must be prevented.
If more than one window is matched, we reject it with an error message.
fixes#1614
Introduce a config directive "show_marks [yes|no]" to en- or disable drawing marks on window decorations.
To not change the look & feel of existing configurations, the default is "no".
If a window has a mark set, e.g., "example", it will be printed on the right side of the window decorations.
The format is "[example]" and the name of the window is truncated if necessary.
Marks starting with an underscore ("_") will be ignored.
When a window receives a _NET_ACTIVE_WINDOW message, it can steal the focus. This may not be preferable to all users.
With this directive, the user can choose from one of the following:
1) 'smart' - focus the container if its workspace is visible, otherwise set the urgency flag (default)
2) 'urgent' - always set the urgency flag, do not steal focus
3) 'focus' - always switch focus, never set the urgency hint
4) 'none' - ignore the request entirely (do not switch focus, nor set the urgency hint)
fixes#1426
This option allows toggling marks on a window without knowing whether the mark is already set or not.
It behaves as follows:
1) If the matched window has no mark, the new mark is set.
2) If the matched window has another mark, the old mark is removed and the new mark is set.
3) If the matched window already has the mark, the mark is removed.
The behavior that all non-matched windows have this mark removed is kept.
fixes#1463
This will ensure that our code stays free of warnings, at least for the
warnings that we have enabled. (Using _FORTIFY_SOURCE > 0 leads to more
warnings, some of them are harder to address.)
1. Add a function writeall and make swrite wrap that function. Use either writeall or swrite, depending on whether we want to exit on errors or not.
2. Fix warnings when compiling with a higher optimisation level.
(CFLAGS ?= -pipe -O3 -march=native -mtune=native -freorder-blocks-and-partition)
Signed-off-by: hwangcc <hwangcc@csie.nctu.edu.tw>
This guarantees the whole visible area of the pixmap is reinitialized,
and ensures that the click bounding boxes are properly aligned with
the displayed text.
If a primary screen is set and the CRTC information can be retrieved,
i3-nagbar will now open on the primary screen. Otherwise, the old (fixed)
position will be used as a fallback.
fixes#1405
When an urgent container is moved to another workspace, the urgency hint
1) is unset on the source workspace and
2) set on the target workspace
fixes#1187
Handle changes to the property _NET_WM_STRUT_PARTIAL by reallocating
screen space in the dock area when the dock client requests a new
position.
This will allow changes to the bar config directive `position` to be
effective on the `reload` command.
fixes#1294
This introduces a "separator_symbol" property for the i3bar configuration.
If set, the specified string will be used as a separator instead of a vertical line. Since it is an optional configuration, complete backwards compatibility is given.
fixes#1472
Otherwise, placeholder windows would accumulate these over restarts. The
worst part is that they don’t get dumped properly, meaning an empty
swallows specification ends up in the state, which matches any window,
so other random windows would be matched into the placeholder (e.g.
i3bar).
fixes#1502
This reverts commit cbd51ce664.
If you’ve started using this feature, I’m very sorry, but I think it’s
better to revert it entirely, as it will only cause more problems in the
future as more and more people upgrade and get bitten by this if we
didn’t revert it…
fixes#1536
Add `markup` to the i3bar protocol as a block member.
This is a string that determines how the block should be parsed as
markup. "pango" indicates the block should be parsed as Pango markup.
"none" indicates the block should not be parsed as markup.
When `new_window` is given in the config, config validation with `i3 -C`
would segfault.
Add a NULL check in logical_px() to check for the case when the config
is being validated without an X server to prevent this.
This combines detecting of current and clicked workspaces into one cycle
and then checks if the x coordinate of the clicked point is greater than
the workspace buttons width.
This allows "--workspace 3" for numbered workspaces, e.g., if the name is actually
"3:foo". This introduces the same functionality the IPC already offers in many places.
This draws the statusline after drawing (and calculating width of) the
workspace buttons and fixes calculation of its maximum visible width.
This (hopefully) guarantees that these two will never overlap.
This fixes the bug when statusline pixmap wasn't entirely cleared that
caused random artifacts to appear when the statusline width is greater
than the screen width.
If no option is given, i3-save-tree should default to the currently focused workspace.
Specifying both --workspace and --output will still yield an error.
When renaming a workspace on another output that moves the workspace to
the current output, the renamed workspace would be shown even though it
does not contain the focused container.
Explicitly show the focused workspace after the move. This is necessary
because `workspace_move_to_output` will show the workspace that is
moved.
014aa7ff74 fixed incorrect align of small
symbols, but also introduced a problem with texts with mixed large and
normal symbols. Fix it by centering the text vertically only if its
height is smaller that the saved font height.
Fixes#1543.
If the mouse cursor is hidden (by unclutter, for example), then scrolling
in the window decoration creates an event with a child
(i.e. event->child != XCB_NONE). This causes route_click() to be called
with dest=CLICK_INSIDE, which prevents scrolling through a stacked layout.
To fix this, check if a click is in the window decoration _before_
checking if the event has a child.
Not quite sure why there are so many differences. Perhaps we’ve gotten
out of the habit of running clang-format after every change.
I guess it’d be best to have a travis hook that runs clang-format for us
and reports any problems on pull requests.
Use the default monospace font for the system in the default config.
This should be a bit more portable for systems that do not have the
recommended font installed.
A buffer is introduced for the statusline which will only be copied to the actual statusline
once an entire statusline is parsed. This avoids a race condition where incompletely parsed
statuslines were rendered, causing only some status blocks to be rendered which is visible to
the user as a flickering.
fixes#1480
## i3status/i3lock bug reports and feature requests
Note that bug reports and feature requests for related projects should be filed in the corresponding repositories for [i3status](https://github.com/i3/i3status) and [i3lock](https://github.com/i3/i3lock).
## i3 bug reports
1. Read the [debugging instructions](https://i3wm.org/docs/debugging.html).
2. Make sure you include a link to your logfile in your report (section 3).
3. Make sure you include the i3 version number in your report (section 1).
4. Please be aware that we cannot support compatibility issues with
closed-source software, as digging into compatibility problems without
having access to the source code is too time-consuming. Additionally,
experience has shown that often, the software in question is responsible for
the issue. Please raise an issue with the software in question, not i3.
5. Please note that i3 does not support compositors (e.g. compton). If you
encountered the issue you are about to report while using a compositor,
please try reproducing it without a compositor.
## i3 feature requests
1. Read the [project goals](https://i3wm.org) on the website and make sure that
they are compatible with the feature you want to suggest.
2. We are generally happy with the current feature set of i3 and instead focus
on maintenance such as stability and fixing bugs. New features will rarely
be considered if they require additional configuration and/or commands, or
if they add significant complexity (either through the exposed configuration
or mental complexity) to the project.
3. Explain in detail what problem the feature addresses and why existing
features fall short.
4. Consider whether the feature could instead be implemented using the
[IPC](https://i3wm.org/docs/ipc.html) or other external tooling.
## Pull requests
* Before sending a pull request for new features, please check with us that the
feature is something we want to see in i3 by opening an issue which has
”feature request” or ”enhancement” in its title.
* Use the `next` branch for developing and sending your pull request.
* Use `clang-format` to format your code.
* Run the [testsuite](https://i3wm.org/docs/testsuite.html)
* If your changes should be reported on the next release's changelog, also
add a small single-line file starting with a number (see examples) containing
a short explanation of your change either in the
[changes](../release-notes/changes) or the
[bugfixes](../release-notes/bugfixes/) folder. Example of changes that should
be reported are bug fixes present in the latest stable version of i3 and new
enhancements. Example of changes that should not be reported are minor code
improvements, documentation, regression and fixes for bugs that were
introduced in the `next` branch.
## Finding something to do
* Find a [reproducible bug](https://github.com/i3/i3/issues?utf8=%E2%9C%93&q=is%3Aopen+label%3Areproducible+label%3Abug+) from the issue tracker. These issues have been reviewed and confirmed by a project contributor.
* Find an [accepted enhancement](https://github.com/i3/i3/issues?utf8=%E2%9C%93&q=is%3Aopen+label%3Aaccepted+label%3Aenhancement) from the issue tracker. These have been approved and are ok to start working on.
There's an [overview of the codebase](https://i3wm.org/docs/hacking-howto.html) available to get you started.
PLEASE HELP US PROCESS GITHUB ISSUES FASTER BY PROVIDING THE FOLLOWING INFORMATION.
-->
## I'm submitting a…
<!--
Check one of the following options with "x".
Please note that at this point we focus on maintaining i3 and fixing bugs, and will rarely consider features which require further configuration or significant complexity.
In such cases you should consider and present specific benefits derived from adding this feature such that it can be weighed against the cost of additional complexity and maintenance.
-->
<pre>
[ ] Bug
[ ] Feature Request
[ ] Documentation Request
[ ] Other (Please describe in detail)
</pre>
## Current Behavior
<!--
Describe the current behavior,
e.g., »When pressing Alt+j (focus left), the window above the current window is focused.«
-->
## Expected Behavior
<!--
Describe the desired behavior you expect after mitigation of the issue,
e.g., »The window left next to the current window should be focused.«
-->
## Reproduction Instructions
<!--
For bug reports, please provide detailed instructions on how the bug can be reproduced.
For feature requests you can remove this section.
E.g., »Open three windows in a V[A H[B C]] layout on a new workspace«
-->
## Environment
<!--
Please include your exact i3 version.
Note that we only support the latest major release and the current development version. If you are using an older version of i3, please first update to the current release version and reproduce the issue there.
-->
Output of `i3 --moreversion 2>&-`:
<pre>
i3 version:
</pre>
<!--
For bug reports, please include your (complete) i3 config with which the issue occurs. You can either paste the file directly or provide a link to a service such as pastebin.
If you would like to help debugging the issue, please try to reduce the config such that it is as close to the default config as possible while still reproducing the issue. This can help us bisect the root cause.
-->
<pre>
</pre>
<!--
Providing a logfile can help us trace the root cause of an issue much quicker. You can learn how to generate the logfile here:
https://i3wm.org/docs/debugging.html
Providing the logfile is optional.
-->
<pre>
Logfile URL:
</pre>
<!--
Please also answer the questions below to help us process your issue faster. If you have any other information to share, please add it here as well.
-->
<pre>
- Linux Distribution & Version:
- Are you using a compositor (e.g., xcompmgr or compton):
- label:Yes,I'm using the latest major release or the current development version. These are the only supported versions.
required:true
- label:Yes,I've searched similar issues and discussions on GitHub and didn't find any.
required:true
- type:textarea
id:current
attributes:
label:Current Behavior
placeholder:|-
Describe the current behavior,
e.g., »When pressing Alt+j (focus left), the window above the current window is focused.«
validations:
required:true
- type:textarea
id:expected
attributes:
label:Expected Behavior
placeholder:|-
Describe the desired behavior you expect after mitigation of the issue,
e.g., »The window left next to the current window should be focused.«
validations:
required:true
- type:textarea
id:reproduction
attributes:
label:Reproduction Instructions
placeholder:|-
Please provide detailed instructions on how the bug can be reproduced.
E.g., »Open three windows in a V[A H[B C]] layout on a new workspace«
validations:
required:true
- type:textarea
id:version
attributes:
label:i3 version
description:|-
Paste the output of
```
i3 --moreversion 2>&-
```
render:text
validations:
required:true
- type:textarea
id:config
attributes:
label:Config file
description:|-
Please include your (complete) i3 config with which the issue occurs.
If you would like to help debugging the issue, please try to reduce the config such that it is as close to the default config as possible while still reproducing the issue. This can help us bisect the root cause.
render:text
validations:
required:true
- type:input
id:distro
attributes:
label:Linux distribution & Version
validations:
required:true
- type:dropdown
id:compositor
attributes:
label:Are you using a compositor?
description:|-
Try running
```shell
pidof picom
pidof compton
```
If any IDs show up, you are running a compositor
options:
- I don't know
- I am sure I don't run any compositor
- picom
- compton
- Other
validations:
required:true
- type:input
id:verbose-output
attributes:
label:Logfile
description:|-
Providing the URL to a logfile can help us trace the root cause of an issue much quicker. You can learn how to generate the logfile here:
- label:Yes,I've searched similar issues and discussions on GitHub and didn't find any.
required:true
- type:checkboxes
id:impact
attributes:
label:Impact
description:|-
Please note that at this point we focus on maintaining i3 and fixing bugs, and will rarely consider features which require further configuration or significant complexity.
In such cases you should consider and present specific benefits derived from adding this feature such that it can be weighed against the cost of additional complexity and maintenance.
Keep in mind that i3 provides a powerful way to interact with it through its IPC interface: https://i3wm.org/docs/ipc.html.
options:
- label:This feature requires new configuration and/or commands
required:false
- type:textarea
id:current
attributes:
label:Current Behavior
placeholder:|-
Describe the current behavior,
e.g., »When pressing Alt+j (focus left), the window above the current window is focused.«
validations:
required:true
- type:textarea
id:desired
attributes:
label:Desired Behavior
placeholder:|-
Describe the desired behavior you expect after mitigation of the issue,
e.g., »The window left next to the current window should be focused.«
| Type (numeric) | Type (name) | Reply type | Purpose
| 0 | +RUN_COMMAND+ | <<_command_reply,COMMAND>> | Run the payload as an i3 command (like the commands you can bind to keys).
| 1 | +GET_WORKSPACES+ | <<_workspaces_reply,WORKSPACES>> | Get the list of current workspaces.
| 2 | +SUBSCRIBE+ | <<_subscribe_reply,SUBSCRIBE>> | Subscribe this IPC connection to the event types specified in the message payload. See <<events>>.
| 3 | +GET_OUTPUTS+ | <<_outputs_reply,OUTPUTS>> | Get the list of current outputs.
| 4 | +GET_TREE+ | <<_tree_reply,TREE>> | Get the i3 layout tree.
| 5 | +GET_MARKS+ | <<_marks_reply,MARKS>> | Gets the names of all currently set marks.
| 6 | +GET_BAR_CONFIG+ | <<_bar_config_reply,BAR_CONFIG>> | Gets the specified bar configuration or the names of all bar configurations if payload is empty.
# If there are multiple scratchpad windows, this command cycles through them.
bindsym Mod1+minus scratchpad show
# Define names for default workspaces for which we configure key bindings later on.
# We use variables to avoid repeating the names in multiple places.
set $ws1 "1"
set $ws2 "2"
set $ws3 "3"
set $ws4 "4"
set $ws5 "5"
set $ws6 "6"
set $ws7 "7"
set $ws8 "8"
set $ws9 "9"
set $ws10 "10"
# switch to workspace
bindsym Mod1+1 workspace 1
bindsym Mod1+2 workspace 2
bindsym Mod1+3 workspace 3
bindsym Mod1+4 workspace 4
bindsym Mod1+5 workspace 5
bindsym Mod1+6 workspace 6
bindsym Mod1+7 workspace 7
bindsym Mod1+8 workspace 8
bindsym Mod1+9 workspace 9
bindsym Mod1+0 workspace 10
bindsym Mod1+1 workspace number $ws1
bindsym Mod1+2 workspace number $ws2
bindsym Mod1+3 workspace number $ws3
bindsym Mod1+4 workspace number $ws4
bindsym Mod1+5 workspace number $ws5
bindsym Mod1+6 workspace number $ws6
bindsym Mod1+7 workspace number $ws7
bindsym Mod1+8 workspace number $ws8
bindsym Mod1+9 workspace number $ws9
bindsym Mod1+0 workspace number $ws10
# move focused container to workspace
bindsym Mod1+Shift+1 move container to workspace 1
bindsym Mod1+Shift+2 move container to workspace 2
bindsym Mod1+Shift+3 move container to workspace 3
bindsym Mod1+Shift+4 move container to workspace 4
bindsym Mod1+Shift+5 move container to workspace 5
bindsym Mod1+Shift+6 move container to workspace 6
bindsym Mod1+Shift+7 move container to workspace 7
bindsym Mod1+Shift+8 move container to workspace 8
bindsym Mod1+Shift+9 move container to workspace 9
bindsym Mod1+Shift+0 move container to workspace 10
bindsym Mod1+Shift+1 move container to workspace number $ws1
bindsym Mod1+Shift+2 move container to workspace number $ws2
bindsym Mod1+Shift+3 move container to workspace number $ws3
bindsym Mod1+Shift+4 move container to workspace number $ws4
bindsym Mod1+Shift+5 move container to workspace number $ws5
bindsym Mod1+Shift+6 move container to workspace number $ws6
bindsym Mod1+Shift+7 move container to workspace number $ws7
bindsym Mod1+Shift+8 move container to workspace number $ws8
bindsym Mod1+Shift+9 move container to workspace number $ws9
bindsym Mod1+Shift+0 move container to workspace number $ws10
# reload the configuration file
bindsym Mod1+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym Mod1+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"
# resize window (you can also use the mouse for that)
# Define names for default workspaces for which we configure key bindings later on.
# We use variables to avoid repeating the names in multiple places.
set $ws1 "1"
set $ws2 "2"
set $ws3 "3"
set $ws4 "4"
set $ws5 "5"
set $ws6 "6"
set $ws7 "7"
set $ws8 "8"
set $ws9 "9"
set $ws10 "10"
# switch to workspace
bindcode $mod+10 workspace 1
bindcode $mod+11 workspace 2
bindcode $mod+12 workspace 3
bindcode $mod+13 workspace 4
bindcode $mod+14 workspace 5
bindcode $mod+15 workspace 6
bindcode $mod+16 workspace 7
bindcode $mod+17 workspace 8
bindcode $mod+18 workspace 9
bindcode $mod+19 workspace 10
bindcode $mod+10 workspace number $ws1
bindcode $mod+11 workspace number $ws2
bindcode $mod+12 workspace number $ws3
bindcode $mod+13 workspace number $ws4
bindcode $mod+14 workspace number $ws5
bindcode $mod+15 workspace number $ws6
bindcode $mod+16 workspace number $ws7
bindcode $mod+17 workspace number $ws8
bindcode $mod+18 workspace number $ws9
bindcode $mod+19 workspace number $ws10
# move focused container to workspace
bindcode $mod+Shift+10 move container to workspace 1
bindcode $mod+Shift+11 move container to workspace 2
bindcode $mod+Shift+12 move container to workspace 3
bindcode $mod+Shift+13 move container to workspace 4
bindcode $mod+Shift+14 move container to workspace 5
bindcode $mod+Shift+15 move container to workspace 6
bindcode $mod+Shift+16 move container to workspace 7
bindcode $mod+Shift+17 move container to workspace 8
bindcode $mod+Shift+18 move container to workspace 9
bindcode $mod+Shift+19 move container to workspace 10
bindcode $mod+Shift+10 move container to workspace number $ws1
bindcode $mod+Shift+11 move container to workspace number $ws2
bindcode $mod+Shift+12 move container to workspace number $ws3
bindcode $mod+Shift+13 move container to workspace number $ws4
bindcode $mod+Shift+14 move container to workspace number $ws5
bindcode $mod+Shift+15 move container to workspace number $ws6
bindcode $mod+Shift+16 move container to workspace number $ws7
bindcode $mod+Shift+17 move container to workspace number $ws8
bindcode $mod+Shift+18 move container to workspace number $ws9
bindcode $mod+Shift+19 move container to workspace number $ws10
# reload the configuration file
bindcode $mod+Shift+54 reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindcode $mod+Shift+27 restart
# exit i3 (logs you out of your X session)
bindcode $mod+Shift+26 exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
bindcode $mod+Shift+26 exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"
# resize window (you can also use the mouse for that)
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
