Create 6032.misc

.buildkite/docker-compose.py35.pg95.yaml

@@ -0,0 +1,22 @@
+version: '3.1'
+
+services:
+
+  postgres:
+    image: postgres:9.5
+    environment:
+      POSTGRES_PASSWORD: postgres
+    command: -c fsync=off
+
+  testenv:
+    image: python:3.5
+    depends_on:
+      - postgres
+    env_file: .env
+    environment:
+      SYNAPSE_POSTGRES_HOST: postgres
+      SYNAPSE_POSTGRES_USER: postgres
+      SYNAPSE_POSTGRES_PASSWORD: postgres
+    working_dir: /src
+    volumes:
+      - ..:/src

.buildkite/docker-compose.py37.pg11.yaml

@@ -0,0 +1,22 @@
+version: '3.1'
+
+services:
+
+  postgres:
+    image: postgres:11
+    environment:
+      POSTGRES_PASSWORD: postgres
+    command: -c fsync=off
+
+  testenv:
+    image: python:3.7
+    depends_on:
+      - postgres
+    env_file: .env
+    environment:
+      SYNAPSE_POSTGRES_HOST: postgres
+      SYNAPSE_POSTGRES_USER: postgres
+      SYNAPSE_POSTGRES_PASSWORD: postgres
+    working_dir: /src
+    volumes:
+      - ..:/src

.buildkite/docker-compose.py37.pg95.yaml

@@ -0,0 +1,22 @@
+version: '3.1'
+
+services:
+
+  postgres:
+    image: postgres:9.5
+    environment:
+      POSTGRES_PASSWORD: postgres
+    command: -c fsync=off
+
+  testenv:
+    image: python:3.7
+    depends_on:
+      - postgres
+    env_file: .env
+    environment:
+      SYNAPSE_POSTGRES_HOST: postgres
+      SYNAPSE_POSTGRES_USER: postgres
+      SYNAPSE_POSTGRES_PASSWORD: postgres
+    working_dir: /src
+    volumes:
+      - ..:/src

.buildkite/format_tap.py

@@ -0,0 +1,48 @@
+# -*- coding: utf-8 -*-
+# Copyright 2019 The Matrix.org Foundation C.I.C.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import sys
+from tap.parser import Parser
+from tap.line import Result, Unknown, Diagnostic
+
+out = ["### TAP Output for " + sys.argv[2]]
+
+p = Parser()
+
+in_error = False
+
+for line in p.parse_file(sys.argv[1]):
+    if isinstance(line, Result):
+        if in_error:
+            out.append("")
+            out.append("</pre></code></details>")
+            out.append("")
+            out.append("----")
+            out.append("")
+        in_error = False
+
+        if not line.ok and not line.todo:
+            in_error = True
+
+            out.append("FAILURE Test #%d: ``%s``" % (line.number, line.description))
+            out.append("")
+            out.append("<details><summary>Show log</summary><code><pre>")
+
+    elif isinstance(line, Diagnostic) and in_error:
+        out.append(line.text)
+
+if out:
+    for line in out[:-3]:
+        print(line)

.buildkite/merge_base_branch.sh

@@ -1,6 +1,6 @@
 #!/usr/bin/env bash
 
-set -e
+set -ex
 
 if [[ "$BUILDKITE_BRANCH" =~ ^(develop|master|dinsic|shhs|release-.*)$ ]]; then
     echo "Not merging forward, as this is a release branch"
@@ -18,8 +18,6 @@ else
     GITBASE=$BUILDKITE_PULL_REQUEST_BASE_BRANCH
 fi
 
-echo "--- merge_base_branch $GITBASE"
-
 # Show what we are before
 git --no-pager show -s
 

.buildkite/postgres-config.yaml

@@ -1,21 +0,0 @@
-# Configuration file used for testing the 'synapse_port_db' script.
-# Tells the script to connect to the postgresql database that will be available in the
-# CI's Docker setup at the point where this file is considered.
-server_name: "localhost:8800"
-
-signing_key_path: "/src/.buildkite/test.signing.key"
-
-report_stats: false
-
-database:
-  name: "psycopg2"
-  args:
-    user: postgres
-    host: postgres
-    password: postgres
-    database: synapse
-
-# Suppress the key server warning.
-trusted_key_servers:
-  - server_name: "matrix.org"
-suppress_key_server_warning: true

.buildkite/scripts/create_postgres_db.py

@@ -1,36 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: utf-8 -*-
-# Copyright 2019 The Matrix.org Foundation C.I.C.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-import logging
-from synapse.storage.engines import create_engine
-
-logger = logging.getLogger("create_postgres_db")
-
-if __name__ == "__main__":
-    # Create a PostgresEngine.
-    db_engine = create_engine({"name": "psycopg2", "args": {}})
-
-    # Connect to postgres to create the base database.
-    # We use "postgres" as a database because it's bound to exist and the "synapse" one
-    # doesn't exist yet.
-    db_conn = db_engine.module.connect(
-        user="postgres", host="postgres", password="postgres", dbname="postgres"
-    )
-    db_conn.autocommit = True
-    cur = db_conn.cursor()
-    cur.execute("CREATE DATABASE synapse;")
-    cur.close()
-    db_conn.close()

.buildkite/scripts/test_old_deps.sh

@@ -1,13 +0,0 @@
-#!/bin/bash
-
-# this script is run by buildkite in a plain `xenial` container; it installs the
-# minimal requirements for tox and hands over to the py35-old tox environment.
-
-set -ex
-
-apt-get update
-apt-get install -y python3.5 python3.5-dev python3-pip libxml2-dev libxslt-dev zlib1g-dev tox
-
-export LANG="C.UTF-8"
-
-exec tox -e py35-old,combine

.buildkite/scripts/test_synapse_port_db.sh

@@ -1,36 +0,0 @@
-#!/bin/bash
-#
-# Test script for 'synapse_port_db', which creates a virtualenv, installs Synapse along
-# with additional dependencies needed for the test (such as coverage or the PostgreSQL
-# driver), update the schema of the test SQLite database and run background updates on it,
-# create an empty test database in PostgreSQL, then run the 'synapse_port_db' script to
-# test porting the SQLite database to the PostgreSQL database (with coverage).
-
-set -xe
-cd `dirname $0`/../..
-
-echo "--- Install dependencies"
-
-# Install dependencies for this test.
-pip install psycopg2 coverage coverage-enable-subprocess
-
-# Install Synapse itself. This won't update any libraries.
-pip install -e .
-
-echo "--- Generate the signing key"
-
-# Generate the server's signing key.
-python -m synapse.app.homeserver --generate-keys -c .buildkite/sqlite-config.yaml
-
-echo "--- Prepare the databases"
-
-# Make sure the SQLite3 database is using the latest schema and has no pending background update.
-scripts-dev/update_database --database-config .buildkite/sqlite-config.yaml
-
-# Create the PostgreSQL database.
-./.buildkite/scripts/create_postgres_db.py
-
-echo "+++ Run synapse_port_db"
-
-# Run the script
-coverage run scripts/synapse_port_db --sqlite-database .buildkite/test_db.db --postgres-config .buildkite/postgres-config.yaml

.buildkite/sqlite-config.yaml

@@ -1,18 +0,0 @@
-# Configuration file used for testing the 'synapse_port_db' script.
-# Tells the 'update_database' script to connect to the test SQLite database to upgrade its
-# schema and run background updates on it.
-server_name: "localhost:8800"
-
-signing_key_path: "/src/.buildkite/test.signing.key"
-
-report_stats: false
-
-database:
-  name: "sqlite3"
-  args:
-    database: ".buildkite/test_db.db"
-
-# Suppress the key server warning.
-trusted_key_servers:
-  - server_name: "matrix.org"
-suppress_key_server_warning: true

.buildkite/worker-blacklist

@@ -5,6 +5,8 @@ Message history can be paginated
 
 Can re-join room if re-invited
 
+/upgrade creates a new room
+
 The only membership state included in an initial sync is for all the senders in the timeline
 
 Local device key changes get to remote servers
@@ -26,16 +28,3 @@ User sees updates to presence from other users in the incremental sync.
 Gapped incremental syncs include all state changes
 
 Old members are included in gappy incr LL sync if they start speaking
-
-# new failures as of https://github.com/matrix-org/sytest/pull/732
-Device list doesn't change if remote server is down
-Remote servers cannot set power levels in rooms without existing powerlevels
-Remote servers should reject attempts by non-creators to set the power levels
-
-# https://buildkite.com/matrix-dot-org/synapse/builds/6134#6f67bf47-e234-474d-80e8-c6e1868b15c5
-Server correctly handles incoming m.device_list_update
-
-# this fails reliably with a torture level of 100 due to https://github.com/matrix-org/synapse/issues/6536
-Outbound federation requests missing prev_events and then asks for /state_ids and resolves the state
-
-Can get rooms/{roomId}/members at a given point

.github/ISSUE_TEMPLATE/BUG_REPORT.md

@@ -7,7 +7,7 @@ about: Create a report to help us improve
 <!--
 
 **IF YOU HAVE SUPPORT QUESTIONS ABOUT RUNNING OR CONFIGURING YOUR OWN HOME SERVER**:
-You will likely get better support more quickly if you ask in ** #synapse:matrix.org ** ;)
+You will likely get better support more quickly if you ask in ** #matrix:matrix.org ** ;)
 
 
 This is a bug report template. By following the instructions below and
@@ -44,26 +44,22 @@ those (please be careful to remove any personal or private data). Please surroun
 <!-- IMPORTANT: please answer the following questions, to help us narrow down the problem -->
 
 <!-- Was this issue identified on matrix.org or another homeserver? -->
-- **Homeserver**:
+- **Homeserver**: 
 
 If not matrix.org:
 
 <!--
- What version of Synapse is running?
-
-You can find the Synapse version with this command:
-
-$ curl http://localhost:8008/_synapse/admin/v1/server_version
-
-(You may need to replace `localhost:8008` if Synapse is not configured to
-listen on that port.)
+What version of Synapse is running?
+You can find the Synapse version by inspecting the server headers (replace matrix.org with
+your own homeserver domain):
+$ curl -v https://matrix.org/_matrix/client/versions 2>&1 | grep "Server:"
 -->
-- **Version**:
+- **Version**: 
 
-- **Install method**:
+- **Install method**: 
 <!-- examples: package manager/git clone/pip  -->
 
-- **Platform**:
+- **Platform**: 
 <!--
 Tell us about the environment in which your homeserver is operating
 distro, hardware, if it's running in a vm/container, etc.

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,12 +1,7 @@
 ### Pull Request Checklist
 
-<!-- Please read CONTRIBUTING.md before submitting your pull request -->
+<!-- Please read CONTRIBUTING.rst before submitting your pull request -->
 
 * [ ] Pull request is based on the develop branch
-* [ ] Pull request includes a [changelog file](https://github.com/matrix-org/synapse/blob/master/CONTRIBUTING.md#changelog). The entry should:
-  - Be a short description of your change which makes sense to users. "Fixed a bug that prevented receiving messages from other servers." instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
-  - Use markdown where necessary, mostly for `code blocks`.
-  - End with either a period (.) or an exclamation mark (!).
-  - Start with a capital letter.
-* [ ] Pull request includes a [sign off](https://github.com/matrix-org/synapse/blob/master/CONTRIBUTING.md#sign-off)
-* [ ] Code style is correct (run the [linters](https://github.com/matrix-org/synapse/blob/master/CONTRIBUTING.md#code-style))
+* [ ] Pull request includes a [changelog file](https://github.com/matrix-org/synapse/blob/master/CONTRIBUTING.rst#changelog)
+* [ ] Pull request includes a [sign off](https://github.com/matrix-org/synapse/blob/master/CONTRIBUTING.rst#sign-off)

.gitignore

@@ -7,11 +7,9 @@
 *.egg-info
 *.lock
 *.pyc
-*.snap
 *.tac
 _trial_temp/
 _trial_temp*/
-/out
 
 # stuff that is likely to exist when you run a server locally
 /*.db

AUTHORS.rst

@@ -1,8 +1,34 @@
-The following is an incomplete list of people outside the core team who have
-contributed to Synapse. It is no longer maintained: more recent contributions
-are listed in the `changelog <CHANGES.md>`_.
+Erik Johnston <erik at matrix.org>
+ * HS core
+ * Federation API impl
 
-----
+Mark Haines <mark at matrix.org>
+ * HS core
+ * Crypto
+ * Content repository
+ * CS v2 API impl
+
+Kegan Dougal <kegan at matrix.org>
+ * HS core
+ * CS v1 API impl
+ * AS API impl
+
+Paul "LeoNerd" Evans <paul at matrix.org>
+ * HS core
+ * Presence
+ * Typing Notifications
+ * Performance metrics and caching layer
+
+Dave Baker <dave at matrix.org>
+ * Push notifications
+ * Auth CS v2 impl
+
+Matthew Hodgson <matthew at matrix.org>
+ * General doc & housekeeping
+ * Vertobot/vertobridge matrix<->verto PoC
+
+Emmanuel Rohee <manu at matrix.org>
+ * Supporting iOS clients (testability and fallback registration)
 
 Turned to Dust <dwinslow86 at gmail.com>
  * ArchLinux installation instructions
@@ -36,16 +62,16 @@ Christoph Witzany <christoph at web.crofting.com>
  * Add LDAP support for authentication
 
 Pierre Jaury <pierre at jaury.eu>
- * Docker packaging
+* Docker packaging
 
 Serban Constantin <serban.constantin at gmail dot com>
  * Small bug fix
 
+Jason Robinson <jasonr at matrix.org>
+ * Minor fixes
+
 Joseph Weston <joseph at weston.cloud>
- * Add admin API for querying HS version
+ + Add admin API for querying HS version
 
 Benjamin Saunders <ben.e.saunders at gmail dot com>
  * Documentation improvements
-
-Werner Sembach <werner.sembach at fau dot de>
- * Automatically remove a group/community when it is empty

CONTRIBUTING.md

@@ -1,224 +0,0 @@
-# Contributing code to Matrix
-
-Everyone is welcome to contribute code to Matrix
-(https://github.com/matrix-org), provided that they are willing to license
-their contributions under the same license as the project itself. We follow a
-simple 'inbound=outbound' model for contributions: the act of submitting an
-'inbound' contribution means that the contributor agrees to license the code
-under the same terms as the project's overall 'outbound' license - in our
-case, this is almost always Apache Software License v2 (see [LICENSE](LICENSE)).
-
-## How to contribute
-
-The preferred and easiest way to contribute changes to Matrix is to fork the
-relevant project on github, and then [create a pull request](
-https://help.github.com/articles/using-pull-requests/) to ask us to pull
-your changes into our repo.
-
-**The single biggest thing you need to know is: please base your changes on
-the develop branch - *not* master.**
-
-We use the master branch to track the most recent release, so that folks who
-blindly clone the repo and automatically check out master get something that
-works. Develop is the unstable branch where all the development actually
-happens: the workflow is that contributors should fork the develop branch to
-make a 'feature' branch for a particular contribution, and then make a pull
-request to merge this back into the matrix.org 'official' develop branch. We
-use github's pull request workflow to review the contribution, and either ask
-you to make any refinements needed or merge it and make them ourselves. The
-changes will then land on master when we next do a release.
-
-We use [Buildkite](https://buildkite.com/matrix-dot-org/synapse) for continuous
-integration. If your change breaks the build, this will be shown in GitHub, so
-please keep an eye on the pull request for feedback.
-
-To run unit tests in a local development environment, you can use:
-
-- ``tox -e py35`` (requires tox to be installed by ``pip install tox``)
-  for SQLite-backed Synapse on Python 3.5.
-- ``tox -e py36`` for SQLite-backed Synapse on Python 3.6.
-- ``tox -e py36-postgres`` for PostgreSQL-backed Synapse on Python 3.6
-  (requires a running local PostgreSQL with access to create databases).
-- ``./test_postgresql.sh`` for PostgreSQL-backed Synapse on Python 3.5
-  (requires Docker). Entirely self-contained, recommended if you don't want to
-  set up PostgreSQL yourself.
-
-Docker images are available for running the integration tests (SyTest) locally,
-see the [documentation in the SyTest repo](
-https://github.com/matrix-org/sytest/blob/develop/docker/README.md) for more
-information.
-
-## Code style
-
-All Matrix projects have a well-defined code-style - and sometimes we've even
-got as far as documenting it... For instance, synapse's code style doc lives
-[here](docs/code_style.md).
-
-To facilitate meeting these criteria you can run `scripts-dev/lint.sh`
-locally. Since this runs the tools listed in the above document, you'll need
-python 3.6 and to install each tool:
-
-```
-# Install the dependencies
-pip install -U black flake8 flake8-comprehensions isort
-
-# Run the linter script
-./scripts-dev/lint.sh
-```
-
-**Note that the script does not just test/check, but also reformats code, so you
-may wish to ensure any new code is committed first**. By default this script
-checks all files and can take some time; if you alter only certain files, you
-might wish to specify paths as arguments to reduce the run-time:
-
-```
-./scripts-dev/lint.sh path/to/file1.py path/to/file2.py path/to/folder
-```
-
-Before pushing new changes, ensure they don't produce linting errors. Commit any
-files that were corrected.
-
-Please ensure your changes match the cosmetic style of the existing project,
-and **never** mix cosmetic and functional changes in the same commit, as it
-makes it horribly hard to review otherwise.
-
-
-## Changelog
-
-All changes, even minor ones, need a corresponding changelog / newsfragment
-entry. These are managed by [Towncrier](https://github.com/hawkowl/towncrier).
-
-To create a changelog entry, make a new file in the `changelog.d` directory named
-in the format of `PRnumber.type`. The type can be one of the following:
-
-* `feature`
-* `bugfix`
-* `docker` (for updates to the Docker image)
-* `doc` (for updates to the documentation)
-* `removal` (also used for deprecations)
-* `misc` (for internal-only changes)
-
-The content of the file is your changelog entry, which should be a short
-description of your change in the same style as the rest of our [changelog](
-https://github.com/matrix-org/synapse/blob/master/CHANGES.md). The file can
-contain Markdown formatting, and should end with a full stop (.) or an
-exclamation mark (!) for consistency.
-
-Adding credits to the changelog is encouraged, we value your
-contributions and would like to have you shouted out in the release notes!
-
-For example, a fix in PR #1234 would have its changelog entry in
-`changelog.d/1234.bugfix`, and contain content like "The security levels of
-Florbs are now validated when received over federation. Contributed by Jane
-Matrix.".
-
-## Debian changelog
-
-Changes which affect the debian packaging files (in `debian`) are an
-exception.
-
-In this case, you will need to add an entry to the debian changelog for the
-next release. For this, run the following command:
-
-```
-dch
-```
-
-This will make up a new version number (if there isn't already an unreleased
-version in flight), and open an editor where you can add a new changelog entry.
-(Our release process will ensure that the version number and maintainer name is
-corrected for the release.)
-
-If your change affects both the debian packaging *and* files outside the debian
-directory, you will need both a regular newsfragment *and* an entry in the
-debian changelog. (Though typically such changes should be submitted as two
-separate pull requests.)
-
-## Sign off
-
-In order to have a concrete record that your contribution is intentional
-and you agree to license it under the same terms as the project's license, we've adopted the
-same lightweight approach that the Linux Kernel
-[submitting patches process](
-https://www.kernel.org/doc/html/latest/process/submitting-patches.html#sign-your-work-the-developer-s-certificate-of-origin>),
-[Docker](https://github.com/docker/docker/blob/master/CONTRIBUTING.md), and many other
-projects use: the DCO (Developer Certificate of Origin:
-http://developercertificate.org/). This is a simple declaration that you wrote
-the contribution or otherwise have the right to contribute it to Matrix:
-
-```
-Developer Certificate of Origin
-Version 1.1
-
-Copyright (C) 2004, 2006 The Linux Foundation and its contributors.
-660 York Street, Suite 102,
-San Francisco, CA 94110 USA
-
-Everyone is permitted to copy and distribute verbatim copies of this
-license document, but changing it is not allowed.
-
-Developer's Certificate of Origin 1.1
-
-By making a contribution to this project, I certify that:
-
-(a) The contribution was created in whole or in part by me and I
-    have the right to submit it under the open source license
-    indicated in the file; or
-
-(b) The contribution is based upon previous work that, to the best
-    of my knowledge, is covered under an appropriate open source
-    license and I have the right under that license to submit that
-    work with modifications, whether created in whole or in part
-    by me, under the same open source license (unless I am
-    permitted to submit under a different license), as indicated
-    in the file; or
-
-(c) The contribution was provided directly to me by some other
-    person who certified (a), (b) or (c) and I have not modified
-    it.
-
-(d) I understand and agree that this project and the contribution
-    are public and that a record of the contribution (including all
-    personal information I submit with it, including my sign-off) is
-    maintained indefinitely and may be redistributed consistent with
-    this project or the open source license(s) involved.
-```
-
-If you agree to this for your contribution, then all that's needed is to
-include the line in your commit or pull request comment:
-
-```
-Signed-off-by: Your Name <your@email.example.org>
-```
-
-We accept contributions under a legally identifiable name, such as
-your name on government documentation or common-law names (names
-claimed by legitimate usage or repute). Unfortunately, we cannot
-accept anonymous contributions at this time.
-
-Git allows you to add this signoff automatically when using the `-s`
-flag to `git commit`, which uses the name and email set in your
-`user.name` and `user.email` git configs.
-
-## Merge Strategy
-
-We use the commit history of develop/master extensively to identify
-when regressions were introduced and what changes have been made.
-
-We aim to have a clean merge history, which means we normally squash-merge
-changes into develop. For small changes this means there is no need to rebase
-to clean up your PR before merging. Larger changes with an organised set of
-commits may be merged as-is, if the history is judged to be useful.
-
-This use of squash-merging will mean PRs built on each other will be hard to 
-merge. We suggest avoiding these where possible, and if required, ensuring
-each PR has a tidy set of commits to ease merging.
-
-## Conclusion
-
-That's it! Matrix is a very open and collaborative project as you might expect
-given our obsession with open communication. If we're going to successfully
-matrix together all the fragmented communication technologies out there we are
-reliant on contributions and collaboration from the community to do so. So
-please get involved - and we hope you have as much fun hacking on Matrix as we
-do!

CONTRIBUTING.rst

@@ -0,0 +1,198 @@
+Contributing code to Matrix
+===========================
+
+Everyone is welcome to contribute code to Matrix
+(https://github.com/matrix-org), provided that they are willing to license
+their contributions under the same license as the project itself. We follow a
+simple 'inbound=outbound' model for contributions: the act of submitting an
+'inbound' contribution means that the contributor agrees to license the code
+under the same terms as the project's overall 'outbound' license - in our
+case, this is almost always Apache Software License v2 (see LICENSE).
+
+How to contribute
+~~~~~~~~~~~~~~~~~
+
+The preferred and easiest way to contribute changes to Matrix is to fork the
+relevant project on github, and then create a pull request to ask us to pull
+your changes into our repo
+(https://help.github.com/articles/using-pull-requests/)
+
+**The single biggest thing you need to know is: please base your changes on
+the develop branch - /not/ master.**
+
+We use the master branch to track the most recent release, so that folks who
+blindly clone the repo and automatically check out master get something that
+works. Develop is the unstable branch where all the development actually
+happens: the workflow is that contributors should fork the develop branch to
+make a 'feature' branch for a particular contribution, and then make a pull
+request to merge this back into the matrix.org 'official' develop branch. We
+use github's pull request workflow to review the contribution, and either ask
+you to make any refinements needed or merge it and make them ourselves. The
+changes will then land on master when we next do a release.
+
+We use `Buildkite <https://buildkite.com/matrix-dot-org/synapse>`_ for
+continuous integration.  Buildkite builds need to be authorised by a
+maintainer. If your change breaks the build, this will be shown in GitHub, so
+please keep an eye on the pull request for feedback.
+
+To run unit tests in a local development environment, you can use:
+
+- ``tox -e py35`` (requires tox to be installed by ``pip install tox``)
+  for SQLite-backed Synapse on Python 3.5.
+- ``tox -e py36`` for SQLite-backed Synapse on Python 3.6.
+- ``tox -e py36-postgres`` for PostgreSQL-backed Synapse on Python 3.6
+  (requires a running local PostgreSQL with access to create databases).
+- ``./test_postgresql.sh`` for PostgreSQL-backed Synapse on Python 3.5
+  (requires Docker). Entirely self-contained, recommended if you don't want to
+  set up PostgreSQL yourself.
+
+Docker images are available for running the integration tests (SyTest) locally,
+see the `documentation in the SyTest repo
+<https://github.com/matrix-org/sytest/blob/develop/docker/README.md>`_ for more
+information.
+
+Code style
+~~~~~~~~~~
+
+All Matrix projects have a well-defined code-style - and sometimes we've even
+got as far as documenting it... For instance, synapse's code style doc lives
+at https://github.com/matrix-org/synapse/tree/master/docs/code_style.rst.
+
+Please ensure your changes match the cosmetic style of the existing project,
+and **never** mix cosmetic and functional changes in the same commit, as it
+makes it horribly hard to review otherwise.
+
+Changelog
+~~~~~~~~~
+
+All changes, even minor ones, need a corresponding changelog / newsfragment
+entry. These are managed by Towncrier
+(https://github.com/hawkowl/towncrier).
+
+To create a changelog entry, make a new file in the ``changelog.d`` file named
+in the format of ``PRnumber.type``. The type can be one of the following:
+
+* ``feature``.
+* ``bugfix``.
+* ``docker`` (for updates to the Docker image).
+* ``doc`` (for updates to the documentation).
+* ``removal`` (also used for deprecations).
+* ``misc`` (for internal-only changes).
+
+The content of the file is your changelog entry, which should be a short
+description of your change in the same style as the rest of our `changelog
+<https://github.com/matrix-org/synapse/blob/master/CHANGES.md>`_. The file can
+contain Markdown formatting, and should end with a full stop ('.') for
+consistency.
+
+Adding credits to the changelog is encouraged, we value your
+contributions and would like to have you shouted out in the release notes!
+
+For example, a fix in PR #1234 would have its changelog entry in
+``changelog.d/1234.bugfix``, and contain content like "The security levels of
+Florbs are now validated when recieved over federation. Contributed by Jane
+Matrix.".
+
+Debian changelog
+----------------
+
+Changes which affect the debian packaging files (in ``debian``) are an
+exception.
+
+In this case, you will need to add an entry to the debian changelog for the
+next release. For this, run the following command::
+
+  dch
+
+This will make up a new version number (if there isn't already an unreleased
+version in flight), and open an editor where you can add a new changelog entry.
+(Our release process will ensure that the version number and maintainer name is
+corrected for the release.)
+
+If your change affects both the debian packaging *and* files outside the debian
+directory, you will need both a regular newsfragment *and* an entry in the
+debian changelog. (Though typically such changes should be submitted as two
+separate pull requests.)
+
+Attribution
+~~~~~~~~~~~
+
+Everyone who contributes anything to Matrix is welcome to be listed in the
+AUTHORS.rst file for the project in question. Please feel free to include a
+change to AUTHORS.rst in your pull request to list yourself and a short
+description of the area(s) you've worked on. Also, we sometimes have swag to
+give away to contributors - if you feel that Matrix-branded apparel is missing
+from your life, please mail us your shipping address to matrix at matrix.org and
+we'll try to fix it :)
+
+Sign off
+~~~~~~~~
+
+In order to have a concrete record that your contribution is intentional
+and you agree to license it under the same terms as the project's license, we've adopted the
+same lightweight approach that the Linux Kernel
+`submitting patches process <https://www.kernel.org/doc/html/latest/process/submitting-patches.html#sign-your-work-the-developer-s-certificate-of-origin>`_, Docker
+(https://github.com/docker/docker/blob/master/CONTRIBUTING.md), and many other
+projects use: the DCO (Developer Certificate of Origin:
+http://developercertificate.org/). This is a simple declaration that you wrote
+the contribution or otherwise have the right to contribute it to Matrix::
+
+    Developer Certificate of Origin
+    Version 1.1
+
+    Copyright (C) 2004, 2006 The Linux Foundation and its contributors.
+    660 York Street, Suite 102,
+    San Francisco, CA 94110 USA
+
+    Everyone is permitted to copy and distribute verbatim copies of this
+    license document, but changing it is not allowed.
+
+    Developer's Certificate of Origin 1.1
+
+    By making a contribution to this project, I certify that:
+
+    (a) The contribution was created in whole or in part by me and I
+        have the right to submit it under the open source license
+        indicated in the file; or
+
+    (b) The contribution is based upon previous work that, to the best
+        of my knowledge, is covered under an appropriate open source
+        license and I have the right under that license to submit that
+        work with modifications, whether created in whole or in part
+        by me, under the same open source license (unless I am
+        permitted to submit under a different license), as indicated
+        in the file; or
+
+    (c) The contribution was provided directly to me by some other
+        person who certified (a), (b) or (c) and I have not modified
+        it.
+
+    (d) I understand and agree that this project and the contribution
+        are public and that a record of the contribution (including all
+        personal information I submit with it, including my sign-off) is
+        maintained indefinitely and may be redistributed consistent with
+        this project or the open source license(s) involved.
+
+If you agree to this for your contribution, then all that's needed is to
+include the line in your commit or pull request comment::
+
+    Signed-off-by: Your Name <your@email.example.org>
+
+We accept contributions under a legally identifiable name, such as
+your name on government documentation or common-law names (names
+claimed by legitimate usage or repute). Unfortunately, we cannot
+accept anonymous contributions at this time.
+
+Git allows you to add this signoff automatically when using the ``-s``
+flag to ``git commit``, which uses the name and email set in your
+``user.name`` and ``user.email`` git configs.
+
+Conclusion
+~~~~~~~~~~
+
+That's it!  Matrix is a very open and collaborative project as you might expect
+given our obsession with open communication.  If we're going to successfully
+matrix together all the fragmented communication technologies out there we are
+reliant on contributions and collaboration from the community to do so.  So
+please get involved - and we hope you have as much fun hacking on Matrix as we
+do!

INSTALL.md

@@ -2,6 +2,7 @@
 - [Installing Synapse](#installing-synapse)
   - [Installing from source](#installing-from-source)
     - [Platform-Specific Instructions](#platform-specific-instructions)
+    - [Troubleshooting Installation](#troubleshooting-installation)
   - [Prebuilt packages](#prebuilt-packages)
 - [Setting up Synapse](#setting-up-synapse)
   - [TLS certificates](#tls-certificates)
@@ -9,7 +10,6 @@
   - [Registering a user](#registering-a-user)
   - [Setting up a TURN server](#setting-up-a-turn-server)
   - [URL previews](#url-previews)
-- [Troubleshooting Installation](#troubleshooting-installation)
 
 # Choosing your server name
 
@@ -36,7 +36,7 @@ that your email address is probably `user@example.com` rather than
 System requirements:
 
 - POSIX-compliant system (tested on Linux & OS X)
-- Python 3.5.2 or later, up to Python 3.8.
+- Python 3.5, 3.6, or 3.7
 - At least 1GB of free RAM if you want to join large public rooms like #matrix:matrix.org
 
 Synapse is written in Python but some of the libraries it uses are written in
@@ -70,7 +70,7 @@ pip install -U matrix-synapse
 ```
 
 Before you can start Synapse, you will need to generate a configuration
-file. To do this, run (in your virtualenv, as before):
+file. To do this, run (in your virtualenv, as before)::
 
 ```
 cd ~/synapse
@@ -84,24 +84,22 @@ python -m synapse.app.homeserver \
 ... substituting an appropriate value for `--server-name`.
 
 This command will generate you a config file that you can then customise, but it will
-also generate a set of keys for you. These keys will allow your homeserver to
-identify itself to other homeserver, so don't lose or delete them. It would be
+also generate a set of keys for you. These keys will allow your Home Server to
+identify itself to other Home Servers, so don't lose or delete them. It would be
 wise to back them up somewhere safe. (If, for whatever reason, you do need to
-change your homeserver's keys, you may find that other homeserver have the
+change your Home Server's keys, you may find that other Home Servers have the
 old key cached. If you update the signing key, you should change the name of the
 key in the `<server name>.signing.key` file (the second word) to something
 different. See the
 [spec](https://matrix.org/docs/spec/server_server/latest.html#retrieving-server-keys)
-for more information on key management).
+for more information on key management.)
 
 To actually run your new homeserver, pick a working directory for Synapse to
-run (e.g. `~/synapse`), and:
+run (e.g. `~/synapse`), and::
 
-```
-cd ~/synapse
-source env/bin/activate
-synctl start
-```
+    cd ~/synapse
+    source env/bin/activate
+    synctl start
 
 ### Platform-Specific Instructions
 
@@ -111,8 +109,8 @@ Installing prerequisites on Ubuntu or Debian:
 
 ```
 sudo apt-get install build-essential python3-dev libffi-dev \
-                     python3-pip python3-setuptools sqlite3 \
-                     libssl-dev virtualenv libjpeg-dev libxslt1-dev
+                     python-pip python-setuptools sqlite3 \
+                     libssl-dev python-virtualenv libjpeg-dev libxslt1-dev
 ```
 
 #### ArchLinux
@@ -126,32 +124,18 @@ sudo pacman -S base-devel python python-pip \
 
 #### CentOS/Fedora
 
-Installing prerequisites on CentOS 8 or Fedora>26:
-
-```
-sudo dnf install libtiff-devel libjpeg-devel libzip-devel freetype-devel \
-                 libwebp-devel tk-devel redhat-rpm-config \
-                 python3-virtualenv libffi-devel openssl-devel
-sudo dnf groupinstall "Development Tools"
-```
-
-Installing prerequisites on CentOS 7 or Fedora<=25:
+Installing prerequisites on CentOS 7 or Fedora 25:
 
 ```
 sudo yum install libtiff-devel libjpeg-devel libzip-devel freetype-devel \
                  lcms2-devel libwebp-devel tcl-devel tk-devel redhat-rpm-config \
-                 python3-virtualenv libffi-devel openssl-devel
+                 python-virtualenv libffi-devel openssl-devel
 sudo yum groupinstall "Development Tools"
 ```
 
-Note that Synapse does not support versions of SQLite before 3.11, and CentOS 7
-uses SQLite 3.7. You may be able to work around this by installing a more
-recent SQLite version, but it is recommended that you instead use a Postgres
-database: see [docs/postgres.md](docs/postgres.md).
+#### Mac OS X
 
-#### macOS
-
-Installing prerequisites on macOS:
+Installing prerequisites on Mac OS X:
 
 ```
 xcode-select --install
@@ -160,14 +144,6 @@ sudo pip install virtualenv
 brew install pkg-config libffi
 ```
 
-On macOS Catalina (10.15) you may need to explicitly install OpenSSL
-via brew and inform `pip` about it so that `psycopg2` builds:
-
-```
-brew install openssl@1.1
-export LDFLAGS=-L/usr/local/Cellar/openssl\@1.1/1.1.1d/lib/
-```
-
 #### OpenSUSE
 
 Installing prerequisites on openSUSE:
@@ -190,7 +166,7 @@ doas pkg_add python libffi py-pip py-setuptools sqlite3 py-virtualenv \
 There is currently no port for OpenBSD. Additionally, OpenBSD's security
 settings require a slightly more difficult installation process.
 
-(XXX: I suspect this is out of date)
+XXX: I suspect this is out of date.
 
 1. Create a new directory in `/usr/local` called `_synapse`. Also, create a
    new user called `_synapse` and set that directory as the new user's home.
@@ -198,7 +174,7 @@ settings require a slightly more difficult installation process.
    write and execute permissions on the same memory space to be run from
    `/usr/local`.
 2. `su` to the new `_synapse` user and change to their home directory.
-3. Create a new virtualenv: `virtualenv -p python3 ~/.synapse`
+3. Create a new virtualenv: `virtualenv -p python2.7 ~/.synapse`
 4. Source the virtualenv configuration located at
    `/usr/local/_synapse/.synapse/bin/activate`. This is done in `ksh` by
    using the `.` command, rather than `bash`'s `source`.
@@ -219,6 +195,45 @@ be found at https://docs.microsoft.com/en-us/windows/wsl/install-win10 for
 Windows 10 and https://docs.microsoft.com/en-us/windows/wsl/install-on-server
 for Windows Server.
 
+### Troubleshooting Installation
+
+XXX a bunch of this is no longer relevant.
+
+Synapse requires pip 8 or later, so if your OS provides too old a version you
+may need to manually upgrade it::
+
+    sudo pip install --upgrade pip
+
+Installing may fail with `Could not find any downloads that satisfy the requirement pymacaroons-pynacl (from matrix-synapse==0.12.0)`.
+You can fix this by manually upgrading pip and virtualenv::
+
+    sudo pip install --upgrade virtualenv
+
+You can next rerun `virtualenv -p python3 synapse` to update the virtual env.
+
+Installing may fail during installing virtualenv with `InsecurePlatformWarning: A true SSLContext object is not available. This prevents urllib3 from configuring SSL appropriately and may cause certain SSL connections to fail. For more information, see https://urllib3.readthedocs.org/en/latest/security.html#insecureplatformwarning.`
+You can fix this  by manually installing ndg-httpsclient::
+
+    pip install --upgrade ndg-httpsclient
+
+Installing may fail with `mock requires setuptools>=17.1. Aborting installation`.
+You can fix this by upgrading setuptools::
+
+    pip install --upgrade setuptools
+
+If pip crashes mid-installation for reason (e.g. lost terminal), pip may
+refuse to run until you remove the temporary installation directory it
+created. To reset the installation::
+
+    rm -rf /tmp/pip_install_matrix
+
+pip seems to leak *lots* of memory during installation.  For instance, a Linux
+host with 512MB of RAM may run out of memory whilst installing Twisted.  If this
+happens, you will have to individually install the dependencies which are
+failing, e.g.::
+
+    pip install twisted
+
 ## Prebuilt packages
 
 As an alternative to installing from source, prebuilt packages are available
@@ -277,7 +292,7 @@ For `buster` and `sid`, Synapse is available in the Debian repositories and
 it should be possible to install it with simply:
 
 ```
-sudo apt install matrix-synapse
+    sudo apt install matrix-synapse
 ```
 
 There is also a version of `matrix-synapse` in `stretch-backports`. Please see
@@ -334,21 +349,12 @@ sudo pip uninstall py-bcrypt
 sudo pip install py-bcrypt
 ```
 
-### Void Linux
-
-Synapse can be found in the void repositories as 'synapse':
-
-```
-xbps-install -Su
-xbps-install -S synapse
-```
-
 ### FreeBSD
 
 Synapse can be installed via FreeBSD Ports or Packages contributed by Brendan Molloy from:
 
  - Ports: `cd /usr/ports/net-im/py-matrix-synapse && make install clean`
- - Packages: `pkg install py37-matrix-synapse`
+ - Packages: `pkg install py27-matrix-synapse`
 
 
 ### NixOS
@@ -362,17 +368,15 @@ Once you have installed synapse as above, you will need to configure it.
 
 ## TLS certificates
 
-The default configuration exposes a single HTTP port on the local
-interface: `http://localhost:8008`. It is suitable for local testing,
-but for any practical use, you will need Synapse's APIs to be served
-over HTTPS.
+The default configuration exposes a single HTTP port: http://localhost:8008. It
+is suitable for local testing, but for any practical use, you will either need
+to enable a reverse proxy, or configure Synapse to expose an HTTPS port.
 
-The recommended way to do so is to set up a reverse proxy on port
-`8448`. You can find documentation on doing so in
-[docs/reverse_proxy.md](docs/reverse_proxy.md).
+For information on using a reverse proxy, see
+[docs/reverse_proxy.rst](docs/reverse_proxy.rst).
 
-Alternatively, you can configure Synapse to expose an HTTPS port. To do
-so, you will need to edit `homeserver.yaml`, as follows:
+To configure Synapse to expose an HTTPS port, you will need to edit
+`homeserver.yaml`, as follows:
 
 * First, under the `listeners` section, uncomment the configuration for the
   TLS-enabled listener. (Remove the hash sign (`#`) at the start of
@@ -385,39 +389,33 @@ so, you will need to edit `homeserver.yaml`, as follows:
       resources:
         - names: [client, federation]
   ```
-
 * You will also need to uncomment the `tls_certificate_path` and
   `tls_private_key_path` lines under the `TLS` section. You can either
   point these settings at an existing certificate and key, or you can
   enable Synapse's built-in ACME (Let's Encrypt) support. Instructions
   for having Synapse automatically provision and renew federation
-  certificates through ACME can be found at [ACME.md](docs/ACME.md).
-  Note that, as pointed out in that document, this feature will not
-  work with installs set up after November 2019.
-
-  If you are using your own certificate, be sure to use a `.pem` file that
-  includes the full certificate chain including any intermediate certificates
-  (for instance, if using certbot, use `fullchain.pem` as your certificate, not
+  certificates through ACME can be found at [ACME.md](docs/ACME.md). If you
+  are using your own certificate, be sure to use a `.pem` file that includes
+  the full certificate chain including any intermediate certificates (for
+  instance, if using certbot, use `fullchain.pem` as your certificate, not
   `cert.pem`).
 
 For a more detailed guide to configuring your server for federation, see
-[federate.md](docs/federate.md).
+[federate.md](docs/federate.md)
 
 
 ## Email
 
-It is desirable for Synapse to have the capability to send email. This allows
-Synapse to send password reset emails, send verifications when an email address
-is added to a user's account, and send email notifications to users when they
-receive new messages.
+It is desirable for Synapse to have the capability to send email. For example,
+this is required to support the 'password reset' feature.
 
 To configure an SMTP server for Synapse, modify the configuration section
-headed `email`, and be sure to have at least the `smtp_host`, `smtp_port`
-and `notif_from` fields filled out.  You may also need to set `smtp_user`,
-`smtp_pass`, and `require_transport_security`.
+headed ``email``, and be sure to have at least the ``smtp_host``, ``smtp_port``
+and ``notif_from`` fields filled out. You may also need to set ``smtp_user``,
+``smtp_pass``, and ``require_transport_security``.
 
-If email is not configured, password reset, registration and notifications via
-email will be disabled.
+If Synapse is not configured with an SMTP server, password reset via email will
+ be disabled by default.
 
 ## Registering a user
 
@@ -448,7 +446,7 @@ on your server even if `enable_registration` is `false`.
 ## Setting up a TURN server
 
 For reliable VoIP calls to be routed via this homeserver, you MUST configure
-a TURN server. See [docs/turn-howto.md](docs/turn-howto.md) for details.
+a TURN server.  See [docs/turn-howto.rst](docs/turn-howto.rst) for details.
 
 ## URL previews
 
@@ -457,24 +455,10 @@ turn it on you must enable the `url_preview_enabled: True` config parameter
 and explicitly specify the IP ranges that Synapse is not allowed to spider for
 previewing in the `url_preview_ip_range_blacklist` configuration parameter.
 This is critical from a security perspective to stop arbitrary Matrix users
-spidering 'internal' URLs on your network. At the very least we recommend that
+spidering 'internal' URLs on your network.  At the very least we recommend that
 your loopback and RFC1918 IP addresses are blacklisted.
 
-This also requires the optional `lxml` and `netaddr` python dependencies to be
-installed. This in turn requires the `libxml2` library to be available - on
+This also requires the optional lxml and netaddr python dependencies to be
+installed.  This in turn requires the libxml2 library to be available - on
 Debian/Ubuntu this means `apt-get install libxml2-dev`, or equivalent for
 your OS.
-
-# Troubleshooting Installation
-
-`pip` seems to leak *lots* of memory during installation. For instance, a Linux
-host with 512MB of RAM may run out of memory whilst installing Twisted. If this
-happens, you will have to individually install the dependencies which are
-failing, e.g.:
-
-```
-pip install twisted
-```
-
-If you have any other problems, feel free to ask in
-[#synapse:matrix.org](https://matrix.to/#/#synapse:matrix.org).

MANIFEST.in

@@ -8,12 +8,11 @@ include demo/demo.tls.dh
 include demo/*.py
 include demo/*.sh
 
-recursive-include synapse/storage *.sql
-recursive-include synapse/storage *.sql.postgres
-recursive-include synapse/storage *.sql.sqlite
-recursive-include synapse/storage *.py
-recursive-include synapse/storage *.txt
-recursive-include synapse/storage *.md
+recursive-include synapse/storage/schema *.sql
+recursive-include synapse/storage/schema *.sql.postgres
+recursive-include synapse/storage/schema *.sql.sqlite
+recursive-include synapse/storage/schema *.py
+recursive-include synapse/storage/schema *.txt
 
 recursive-include docs *
 recursive-include scripts *
@@ -30,24 +29,25 @@ recursive-include synapse/static *.gif
 recursive-include synapse/static *.html
 recursive-include synapse/static *.js
 
-exclude .codecov.yml
-exclude .coveragerc
-exclude .dockerignore
-exclude .editorconfig
 exclude Dockerfile
-exclude mypy.ini
-exclude sytest-blacklist
+exclude .dockerignore
 exclude test_postgresql.sh
+exclude .editorconfig
+exclude sytest-blacklist
 
 include pyproject.toml
 recursive-include changelog.d *
 
 prune .buildkite
 prune .circleci
+prune .codecov.yml
+prune .coveragerc
 prune .github
-prune contrib
 prune debian
 prune demo/etc
 prune docker
-prune snap
+prune mypy.ini
 prune stubs
+
+exclude jenkins*
+recursive-exclude jenkins *.sh

README.rst

@@ -115,7 +115,7 @@ Registering a new user from a client
 
 By default, registration of new users via Matrix clients is disabled. To enable
 it, specify ``enable_registration: true`` in ``homeserver.yaml``. (It is then
-recommended to also set up CAPTCHA - see `<docs/CAPTCHA_SETUP.md>`_.)
+recommended to also set up CAPTCHA - see `<docs/CAPTCHA_SETUP.rst>`_.)
 
 Once ``enable_registration`` is set to ``true``, it is possible to register a
 user via `riot.im <https://riot.im/app/#/register>`_ or other Matrix clients.
@@ -186,7 +186,7 @@ Almost all installations should opt to use PostreSQL. Advantages include:
   synapse itself.
 
 For information on how to install and use PostgreSQL, please see
-`docs/postgres.md <docs/postgres.md>`_.
+`docs/postgres.rst <docs/postgres.rst>`_.
 
 .. _reverse-proxy:
 
@@ -201,7 +201,7 @@ It is recommended to put a reverse proxy such as
 doing so is that it means that you can expose the default https port (443) to
 Matrix clients without needing to run Synapse with root privileges.
 
-For information on configuring one, see `<docs/reverse_proxy.md>`_.
+For information on configuring one, see `<docs/reverse_proxy.rst>`_.
 
 Identity Servers
 ================
@@ -272,7 +272,7 @@ to install using pip and a virtualenv::
 
     virtualenv -p python3 env
     source env/bin/activate
-    python -m pip install --no-use-pep517 -e ".[all]"
+    python -m pip install --no-use-pep517 -e .[all]
 
 This will run a process of downloading and installing all the needed
 dependencies into a virtual env.
@@ -381,16 +381,3 @@ indicate that your server is also issuing far more outgoing federation
 requests than can be accounted for by your users' activity, this is a
 likely cause. The misbehavior can be worked around by setting
 ``use_presence: false`` in the Synapse config file.
-
-People can't accept room invitations from me
---------------------------------------------
-
-The typical failure mode here is that you send an invitation to someone 
-to join a room or direct chat, but when they go to accept it, they get an
-error (typically along the lines of "Invalid signature"). They might see
-something like the following in their logs::
-
-    2019-09-11 19:32:04,271 - synapse.federation.transport.server - 288 - WARNING - GET-11752 - authenticate_request failed: 401: Invalid signature for server <server> with key ed25519:a_EqML: Unable to verify signature for <server>
-
-This is normally caused by a misconfiguration in your reverse-proxy. See
-`<docs/reverse_proxy.md>`_ and double-check that your settings are correct.

UPGRADE.rst

@@ -2,446 +2,108 @@ Upgrading Synapse
 =================
 
 Before upgrading check if any special steps are required to upgrade from the
-version you currently have installed to the current version of Synapse. The extra
+what you currently have installed to current version of synapse. The extra
 instructions that may be required are listed later in this document.
 
-* If Synapse was installed using `prebuilt packages
-  <INSTALL.md#prebuilt-packages>`_, you will need to follow the normal process
-  for upgrading those packages.
+1. If synapse was installed in a virtualenv then activate that virtualenv before
+   upgrading. If synapse is installed in a virtualenv in ``~/synapse/env`` then
+   run:
 
-* If Synapse was installed from source, then:
-
-  1. Activate the virtualenv before upgrading. For example, if Synapse is
-     installed in a virtualenv in ``~/synapse/env`` then run:
-
-     .. code:: bash
+   .. code:: bash
 
        source ~/synapse/env/bin/activate
 
-  2. If Synapse was installed using pip then upgrade to the latest version by
-     running:
+2. If synapse was installed using pip then upgrade to the latest version by
+   running:
 
-     .. code:: bash
+   .. code:: bash
 
-       pip install --upgrade matrix-synapse
+       pip install --upgrade matrix-synapse[all]
 
-     If Synapse was installed using git then upgrade to the latest version by
-     running:
+       # restart synapse
+       synctl restart
 
-     .. code:: bash
 
+   If synapse was installed using git then upgrade to the latest version by
+   running:
+
+   .. code:: bash
+
+       # Pull the latest version of the master branch.
        git pull
-       pip install --upgrade .
 
-  3. Restart Synapse:
-
-     .. code:: bash
+       # Update synapse and its python dependencies.
+       pip install --upgrade .[all]
 
+       # restart synapse
        ./synctl restart
 
-To check whether your update was successful, you can check the running server
-version with:
+
+To check whether your update was successful, you can check the Server header
+returned by the Client-Server API:
 
 .. code:: bash
 
-    # you may need to replace 'localhost:8008' if synapse is not configured
-    # to listen on port 8008.
-
-    curl http://localhost:8008/_synapse/admin/v1/server_version
-
-Rolling back to older versions
-------------------------------
-
-Rolling back to previous releases can be difficult, due to database schema
-changes between releases. Where we have been able to test the rollback process,
-this will be noted below.
-
-In general, you will need to undo any changes made during the upgrade process,
-for example:
-
-* pip:
-
-  .. code:: bash
-
-     source env/bin/activate
-     # replace `1.3.0` accordingly:
-     pip install matrix-synapse==1.3.0
-
-* Debian:
-
-  .. code:: bash
-
-     # replace `1.3.0` and `stretch` accordingly:
-     wget https://packages.matrix.org/debian/pool/main/m/matrix-synapse-py3/matrix-synapse-py3_1.3.0+stretch1_amd64.deb
-     dpkg -i matrix-synapse-py3_1.3.0+stretch1_amd64.deb
-
-Upgrading to v1.13.0
-====================
-
-
-Incorrect database migration in old synapse versions
-----------------------------------------------------
-
-A bug was introduced in Synapse 1.4.0 which could cause the room directory to
-be incomplete or empty if Synapse was upgraded directly from v1.2.1 or
-earlier, to versions between v1.4.0 and v1.12.x.
-
-This will *not* be a problem for Synapse installations which were:
- * created at v1.4.0 or later,
- * upgraded via v1.3.x, or
- * upgraded straight from v1.2.1 or earlier to v1.13.0 or later.
-
-If completeness of the room directory is a concern, installations which are
-affected can be repaired as follows:
-
-1. Run the following sql from a `psql` or `sqlite3` console:
-
-   .. code:: sql
-
-     INSERT INTO background_updates (update_name, progress_json, depends_on) VALUES
-        ('populate_stats_process_rooms', '{}', 'current_state_events_membership');
-
-     INSERT INTO background_updates (update_name, progress_json, depends_on) VALUES
-        ('populate_stats_process_users', '{}', 'populate_stats_process_rooms');
-
-2. Restart synapse.
-
-New Single Sign-on HTML Templates
----------------------------------
-
-New templates (``sso_auth_confirm.html``, ``sso_auth_success.html``, and
-``sso_account_deactivated.html``) were added to Synapse. If your Synapse is
-configured to use SSO and a custom  ``sso_redirect_confirm_template_dir``
-configuration then these templates will need to be copied from
-`synapse/res/templates <synapse/res/templates>`_ into that directory.
-
-Synapse SSO Plugins Method Deprecation
---------------------------------------
-
-Plugins using the ``complete_sso_login`` method of
-``synapse.module_api.ModuleApi`` should update to using the async/await
-version ``complete_sso_login_async`` which includes additional checks. The
-non-async version is considered deprecated.
-
-Rolling back to v1.12.4 after a failed upgrade
-----------------------------------------------
-
-v1.13.0 includes a lot of large changes. If something problematic occurs, you
-may want to roll-back to a previous version of Synapse. Because v1.13.0 also
-includes a new database schema version, reverting that version is also required
-alongside the generic rollback instructions mentioned above. In short, to roll
-back to v1.12.4 you need to:
-
-1. Stop the server
-2. Decrease the schema version in the database:
-
-   .. code:: sql
-    
-      UPDATE schema_version SET version = 57;
-
-3. Downgrade Synapse by following the instructions for your installation method
-   in the "Rolling back to older versions" section above.
-    
-
-Upgrading to v1.12.0
-====================
-
-This version includes a database update which is run as part of the upgrade,
-and which may take some time (several hours in the case of a large
-server). Synapse will not respond to HTTP requests while this update is taking
-place.
-
-This is only likely to be a problem in the case of a server which is
-participating in many rooms.
-
-0. As with all upgrades, it is recommended that you have a recent backup of
-   your database which can be used for recovery in the event of any problems.
-
-1. As an initial check to see if you will be affected, you can try running the
-   following query from the `psql` or `sqlite3` console. It is safe to run it
-   while Synapse is still running.
-
-   .. code:: sql
-
-      SELECT MAX(q.v) FROM (
-        SELECT (
-          SELECT ej.json AS v
-          FROM state_events se INNER JOIN event_json ej USING (event_id)
-          WHERE se.room_id=rooms.room_id AND se.type='m.room.create' AND se.state_key=''
-          LIMIT 1
-        ) FROM rooms WHERE rooms.room_version IS NULL
-      ) q;
-
-   This query will take about the same amount of time as the upgrade process: ie,
-   if it takes 5 minutes, then it is likely that Synapse will be unresponsive for
-   5 minutes during the upgrade.
-
-   If you consider an outage of this duration to be acceptable, no further
-   action is necessary and you can simply start Synapse 1.12.0.
-
-   If you would prefer to reduce the downtime, continue with the steps below.
-
-2. The easiest workaround for this issue is to manually
-   create a new index before upgrading. On PostgreSQL, his can be done as follows:
-
-   .. code:: sql
-
-      CREATE INDEX CONCURRENTLY tmp_upgrade_1_12_0_index
-      ON state_events(room_id) WHERE type = 'm.room.create';
-
-   The above query may take some time, but is also safe to run while Synapse is
-   running.
-
-   We assume that no SQLite users have databases large enough to be
-   affected. If you *are* affected, you can run a similar query, omitting the
-   ``CONCURRENTLY`` keyword. Note however that this operation may in itself cause
-   Synapse to stop running for some time. Synapse admins are reminded that
-   `SQLite is not recommended for use outside a test
-   environment <https://github.com/matrix-org/synapse/blob/master/README.rst#using-postgresql>`_.
-
-3. Once the index has been created, the ``SELECT`` query in step 1 above should
-   complete quickly. It is therefore safe to upgrade to Synapse 1.12.0.
-
-4. Once Synapse 1.12.0 has successfully started and is responding to HTTP
-   requests, the temporary index can be removed:
-
-   .. code:: sql
-
-      DROP INDEX tmp_upgrade_1_12_0_index;
-
-Upgrading to v1.10.0
-====================
-
-Synapse will now log a warning on start up if used with a PostgreSQL database
-that has a non-recommended locale set.
-
-See `docs/postgres.md <docs/postgres.md>`_ for details.
-
-
-Upgrading to v1.8.0
-===================
-
-Specifying a ``log_file`` config option will now cause Synapse to refuse to
-start, and should be replaced by with the ``log_config`` option. Support for
-the ``log_file`` option was removed in v1.3.0 and has since had no effect.
-
-
-Upgrading to v1.7.0
-===================
-
-In an attempt to configure Synapse in a privacy preserving way, the default
-behaviours of ``allow_public_rooms_without_auth`` and
-``allow_public_rooms_over_federation`` have been inverted. This means that by
-default, only authenticated users querying the Client/Server API will be able
-to query the room directory, and relatedly that the server will not share
-room directory information with other servers over federation.
-
-If your installation does not explicitly set these settings one way or the other
-and you want either setting to be ``true`` then it will necessary to update
-your homeserver configuration file accordingly.
-
-For more details on the surrounding context see our `explainer
-<https://matrix.org/blog/2019/11/09/avoiding-unwelcome-visitors-on-private-matrix-servers>`_.
-
-
-Upgrading to v1.5.0
-===================
-
-This release includes a database migration which may take several minutes to
-complete if there are a large number (more than a million or so) of entries in
-the ``devices`` table. This is only likely to a be a problem on very large
-installations.
-
+    # replace <host.name> with the hostname of your synapse homeserver.
+    # You may need to specify a port (eg, :8448) if your server is not
+    # configured on port 443.
+    curl -kv https://<host.name>/_matrix/client/versions 2>&1 | grep "Server:"
 
 Upgrading to v1.4.0
 ===================
 
-New custom templates
---------------------
+Config options
+--------------
 
-If you have configured a custom template directory with the
-``email.template_dir`` option, be aware that there are new templates regarding
-registration and threepid management (see below) that must be included.
+**Note: Registration by email address or phone number will not work in this release unless
+some config options are changed from their defaults.**
 
-* ``registration.html`` and ``registration.txt``
-* ``registration_success.html`` and ``registration_failure.html``
-* ``add_threepid.html`` and  ``add_threepid.txt``
-* ``add_threepid_failure.html`` and ``add_threepid_success.html``
+This is due to Synapse v1.4.0 now defaulting to sending registration and password reset tokens
+itself. This is for security reasons as well as putting less reliance on identity servers.
+However, currently Synapse only supports sending emails, and does not have support for
+phone-based password reset or account registration. If Synapse is configured to handle these on
+its own, phone-based password resets and registration will be disabled. For Synapse to send
+emails, the ``email`` block of the config must be filled out. If not, then password resets and
+registration via email will be disabled entirely.
 
-Synapse will expect these files to exist inside the configured template
-directory, and **will fail to start** if they are absent.
-To view the default templates, see `synapse/res/templates
-<https://github.com/matrix-org/synapse/tree/master/synapse/res/templates>`_.
+This release also deprecates the ``email.trust_identity_server_for_password_resets`` option and
+replaces it with the ``account_threepid_delegates`` dictionary. This option defines whether the
+homeserver should delegate an external server (typically an `identity server
+<https://matrix.org/docs/spec/identity_service/r0.2.1>`_) to handle sending password reset or
+registration messages via email and SMS.
 
-3pid verification changes
--------------------------
-
-**Note: As of this release, users will be unable to add phone numbers or email
-addresses to their accounts, without changes to the Synapse configuration. This
-includes adding an email address during registration.**
-
-It is possible for a user to associate an email address or phone number
-with their account, for a number of reasons:
-
-* for use when logging in, as an alternative to the user id.
-* in the case of email, as an alternative contact to help with account recovery.
-* in the case of email, to receive notifications of missed messages.
-
-Before an email address or phone number can be added to a user's account,
-or before such an address is used to carry out a password-reset, Synapse must
-confirm the operation with the owner of the email address or phone number.
-It does this by sending an email or text giving the user a link or token to confirm
-receipt. This process is known as '3pid verification'. ('3pid', or 'threepid',
-stands for third-party identifier, and we use it to refer to external
-identifiers such as email addresses and phone numbers.)
-
-Previous versions of Synapse delegated the task of 3pid verification to an
-identity server by default. In most cases this server is ``vector.im`` or
-``matrix.org``.
-
-In Synapse 1.4.0, for security and privacy reasons, the homeserver will no
-longer delegate this task to an identity server by default. Instead,
-the server administrator will need to explicitly decide how they would like the
-verification messages to be sent.
-
-In the medium term, the ``vector.im`` and ``matrix.org`` identity servers will
-disable support for delegated 3pid verification entirely. However, in order to
-ease the transition, they will retain the capability for a limited
-period. Delegated email verification will be disabled on Monday 2nd December
-2019 (giving roughly 2 months notice). Disabling delegated SMS verification
-will follow some time after that once SMS verification support lands in
-Synapse.
-
-Once delegated 3pid verification support has been disabled in the ``vector.im`` and
-``matrix.org`` identity servers, all Synapse versions that depend on those
-instances will be unable to verify email and phone numbers through them. There
-are no imminent plans to remove delegated 3pid verification from Sydent
-generally. (Sydent is the identity server project that backs the ``vector.im`` and
-``matrix.org`` instances).
-
-Email
-~~~~~
-Following upgrade, to continue verifying email (e.g. as part of the
-registration process), admins can either:-
-
-* Configure Synapse to use an email server.
-* Run or choose an identity server which allows delegated email verification
-  and delegate to it.
-
-Configure SMTP in Synapse
-+++++++++++++++++++++++++
-
-To configure an SMTP server for Synapse, modify the configuration section
-headed ``email``, and be sure to have at least the ``smtp_host, smtp_port``
-and ``notif_from`` fields filled out.
-
-You may also need to set ``smtp_user``, ``smtp_pass``, and
-``require_transport_security``.
-
-See the `sample configuration file <docs/sample_config.yaml>`_ for more details
-on these settings.
-
-Delegate email to an identity server
-++++++++++++++++++++++++++++++++++++
-
-Some admins will wish to continue using email verification as part of the
-registration process, but will not immediately have an appropriate SMTP server
-at hand.
-
-To this end, we will continue to support email verification delegation via the
-``vector.im`` and ``matrix.org`` identity servers for two months. Support for
-delegated email verification will be disabled on Monday 2nd December.
-
-The ``account_threepid_delegates`` dictionary defines whether the homeserver
-should delegate an external server (typically an `identity server
-<https://matrix.org/docs/spec/identity_service/r0.2.1>`_) to handle sending
-confirmation messages via email and SMS.
-
-So to delegate email verification, in ``homeserver.yaml``, set
-``account_threepid_delegates.email`` to the base URL of an identity server. For
-example:
-
-.. code:: yaml
-
-   account_threepid_delegates:
-       email: https://example.com     # Delegate email sending to example.com
-
-Note that ``account_threepid_delegates.email`` replaces the deprecated
-``email.trust_identity_server_for_password_resets``: if
-``email.trust_identity_server_for_password_resets`` is set to ``true``, and
+If ``email.trust_identity_server_for_password_resets`` is set to ``true``, and
 ``account_threepid_delegates.email`` is not set, then the first entry in
-``trusted_third_party_id_servers`` will be used as the
-``account_threepid_delegate`` for email. This is to ensure compatibility with
-existing Synapse installs that set up external server handling for these tasks
-before v1.4.0. If ``email.trust_identity_server_for_password_resets`` is
-``true`` and no trusted identity server domains are configured, Synapse will
-report an error and refuse to start.
+``trusted_third_party_id_servers`` will be used as the account threepid delegate for email.
+This is to ensure compatibility with existing Synapse installs that set up external server
+handling for these tasks before v1.4.0. If ``email.trust_identity_server_for_password_resets``
+is ``true`` and no trusted identity server domains are configured, Synapse will throw an error.
 
-If ``email.trust_identity_server_for_password_resets`` is ``false`` or absent
-and no ``email`` delegate is configured in ``account_threepid_delegates``,
-then Synapse will send email verification messages itself, using the configured
-SMTP server (see above).
-that type.
+If ``email.trust_identity_server_for_password_resets`` is ``false`` or absent and a threepid
+type in ``account_threepid_delegates`` is not set to a domain, then Synapse will attempt to
+send password reset and registration messages for that type.
 
-Phone numbers
-~~~~~~~~~~~~~
+Email templates
+---------------
 
-Synapse does not support phone-number verification itself, so the only way to
-maintain the ability for users to add phone numbers to their accounts will be
-by continuing to delegate phone number verification to the ``matrix.org`` and
-``vector.im`` identity servers (or another identity server that supports SMS
-sending).
+If you have configured a custom template directory with the ``email.template_dir`` option, be
+aware that there are new templates regarding registration. ``registration.html`` and
+``registration.txt`` have been added and contain the content that is sent to a client upon
+registering via an email address.
 
-The ``account_threepid_delegates`` dictionary defines whether the homeserver
-should delegate an external server (typically an `identity server
-<https://matrix.org/docs/spec/identity_service/r0.2.1>`_) to handle sending
-confirmation messages via email and SMS.
+``registration_success.html`` and ``registration_failure.html`` are also new HTML templates
+that will be shown to the user when they click the link in their registration emai , either
+showing them a success or failure page (assuming a redirect URL is not configured).
 
-So to delegate phone number verification, in ``homeserver.yaml``, set
-``account_threepid_delegates.msisdn`` to the base URL of an identity
-server. For example:
-
-.. code:: yaml
-
-   account_threepid_delegates:
-       msisdn: https://example.com     # Delegate sms sending to example.com
-
-The ``matrix.org`` and ``vector.im`` identity servers will continue to support
-delegated phone number verification via SMS until such time as it is possible
-for admins to configure their servers to perform phone number verification
-directly. More details will follow in a future release.
-
-Rolling back to v1.3.1
-----------------------
-
-If you encounter problems with v1.4.0, it should be possible to roll back to
-v1.3.1, subject to the following:
-
-* The 'room statistics' engine was heavily reworked in this release (see
-  `#5971 <https://github.com/matrix-org/synapse/pull/5971>`_), including
-  significant changes to the database schema, which are not easily
-  reverted. This will cause the room statistics engine to stop updating when
-  you downgrade.
-
-  The room statistics are essentially unused in v1.3.1 (in future versions of
-  Synapse, they will be used to populate the room directory), so there should
-  be no loss of functionality. However, the statistics engine will write errors
-  to the logs, which can be avoided by setting the following in
-  `homeserver.yaml`:
-
-  .. code:: yaml
-
-    stats:
-      enabled: false
-
-  Don't forget to re-enable it when you upgrade again, in preparation for its
-  use in the room directory!
+Synapse will expect these files to exist inside the configured template directory. To view the
+default templates, see `synapse/res/templates
+<https://github.com/matrix-org/synapse/tree/master/synapse/res/templates>`_.
 
 Upgrading to v1.2.0
 ===================
 
 Some counter metrics have been renamed, with the old names deprecated. See
-`the metrics documentation <docs/metrics-howto.md#renaming-of-metrics--deprecation-of-old-names-in-12>`_
+`the metrics documentation <docs/metrics-howto.rst#renaming-of-metrics--deprecation-of-old-names-in-12>`_
 for details.
 
 Upgrading to v1.1.0

changelog.d/5633.bugfix

@@ -0,0 +1 @@
+Don't create broken room when power_level_content_override.users does not contain creator_id.

changelog.d/5680.misc

@@ -0,0 +1 @@
+Lay the groundwork for structured logging output.

changelog.d/5771.feature

@@ -0,0 +1 @@
+Make Opentracing work in worker mode.

changelog.d/5776.misc

@@ -0,0 +1 @@
+Update opentracing docs to use the unified `trace` method.

changelog.d/5835.feature

@@ -0,0 +1 @@
+Add the ability to send registration emails from the homeserver rather than delegating to an identity server.

changelog.d/5844.misc

@@ -0,0 +1 @@
+Retry well-known lookup before the cache expires, giving a grace period where the remote well-known can be down but we still use the old result.

changelog.d/5845.feature

@@ -0,0 +1 @@
+Add an admin API to purge old rooms from the database.

changelog.d/5850.feature

@@ -0,0 +1 @@
+Add retry to well-known lookups if we have recently seen a valid well-known record for the server.

changelog.d/5852.feature

@@ -0,0 +1 @@
+Pass opentracing contexts between servers when transmitting EDUs.

changelog.d/5853.feature

@@ -0,0 +1 @@
+Opentracing for device list updates.

changelog.d/5855.misc

@@ -0,0 +1 @@
+Opentracing for room and e2e keys.

changelog.d/5856.feature

@@ -0,0 +1 @@
+Add a tag recording a request's authenticated entity and corresponding servlet in opentracing.

changelog.d/5857.bugfix

@@ -0,0 +1 @@
+Fix database index so that different backup versions can have the same sessions.

changelog.d/5859.feature

@@ -0,0 +1 @@
+Add unstable support for MSC2197 (filtered search requests over federation), in order to allow upcoming room directory query performance improvements.

changelog.d/5860.misc

@@ -0,0 +1 @@
+Remove log line for debugging issue #5407.

changelog.d/5863.bugfix

@@ -0,0 +1 @@
+Fix Synapse looking for config options `password_reset_failure_template` and `password_reset_success_template`, when they are actually `password_reset_template_failure_html`, `password_reset_template_success_html`.

changelog.d/5864.feature

@@ -0,0 +1 @@
+Correctly retry all hosts returned from SRV when we fail to connect.

changelog.d/5868.feature

@@ -0,0 +1 @@
+Add `m.require_identity_server` key to `/versions`'s `unstable_features` section.

changelog.d/5875.misc

@@ -0,0 +1 @@
+Deprecate the `trusted_third_party_id_servers` option.

changelog.d/5876.feature

@@ -0,0 +1 @@
+Replace `trust_identity_server_for_password_resets` config option with `account_threepid_delegates`.

changelog.d/5877.removal

@@ -0,0 +1 @@
+Remove shared secret registration from client/r0/register endpoint. Contributed by Awesome Technologies Innovationslabor GmbH.

changelog.d/5878.feature

@@ -0,0 +1 @@
+Add admin API endpoint for setting whether or not a user is a server administrator.

changelog.d/5885.bugfix

@@ -0,0 +1 @@
+Fix stack overflow when recovering an appservice which had an outage.

changelog.d/5886.misc

@@ -0,0 +1 @@
+Refactor the Appservice scheduler code.

changelog.d/5892.misc

@@ -0,0 +1 @@
+Compatibility with v2 Identity Service APIs other than /lookup.

changelog.d/5893.misc

@@ -0,0 +1 @@
+Drop some unused tables.

changelog.d/5894.misc

@@ -0,0 +1 @@
+Add missing index on users_in_public_rooms to improve the performance of directory queries.

changelog.d/5895.feature

@@ -0,0 +1 @@
+Add config option to sign remote key query responses with a separate key.

changelog.d/5896.misc

@@ -0,0 +1 @@
+Improve the logging when we have an error when fetching signing keys.

changelog.d/5897.feature

@@ -0,0 +1 @@
+Switch to using the v2 Identity Service `/lookup` API where available, with fallback to v1. (Implements [MSC2134](https://github.com/matrix-org/matrix-doc/pull/2134) plus id_access_token authentication for v2 Identity Service APIs from [MSC2140](https://github.com/matrix-org/matrix-doc/pull/2140)).

changelog.d/5900.feature

@@ -0,0 +1 @@
+Add support for config templating.

changelog.d/5902.feature

@@ -0,0 +1 @@
+Users with the type of "support" or "bot" are no longer required to consent.

changelog.d/5904.feature

@@ -0,0 +1 @@
+Let synctl accept a directory of config files.

changelog.d/5906.feature

@@ -0,0 +1 @@
+Increase max display name size to 256.

changelog.d/5909.misc

@@ -0,0 +1 @@
+Fix error message which referred to public_base_url instead of public_baseurl. Thanks to @aaronraimist for the fix!

changelog.d/5911.misc

@@ -0,0 +1 @@
+Add support for database engine-specific schema deltas, based on file extension.

changelog.d/5914.feature

@@ -0,0 +1 @@
+Add admin API endpoint for getting whether or not a user is a server administrator.

changelog.d/5915.bugfix

@@ -0,0 +1 @@
+Fix 404 for thumbnail download when `dynamic_thumbnails` is `false` and the thumbnail was dynamically generated. Fix reported by rkfg.

changelog.d/5920.bugfix

@@ -0,0 +1 @@
+Fix a cache-invalidation bug for worker-based deployments.

changelog.d/5922.misc

@@ -0,0 +1 @@
+Update Buildkite pipeline to use plugins instead of buildkite-agent commands.

changelog.d/5926.misc

@@ -0,0 +1 @@
+Add link in sample config to the logging config schema.

changelog.d/5931.misc

@@ -0,0 +1 @@
+Remove unnecessary parentheses in return statements.

changelog.d/5934.feature

@@ -0,0 +1 @@
+Redact events in the database that have been redacted for a month.

changelog.d/5938.misc

@@ -0,0 +1 @@
+Remove unused jenkins/prepare_sytest.sh file.

changelog.d/5940.feature

@@ -0,0 +1 @@
+Add the ability to send registration emails from the homeserver rather than delegating to an identity server.

changelog.d/5943.misc

@@ -0,0 +1 @@
+Move Buildkite pipeline config to the pipelines repo.

changelog.d/5953.misc

@@ -0,0 +1 @@
+Update INSTALL.md to say that Python 2 is no longer supported.

changelog.d/5962.misc

@@ -0,0 +1 @@
+Remove unnecessary return statements in the codebase which were the result of a regex run.

changelog.d/5963.misc

@@ -0,0 +1 @@
+Remove left-over methods from C/S registration API.

changelog.d/5964.feature

@@ -0,0 +1 @@
+Remove `bind_email` and `bind_msisdn` parameters from /register ala MSC2140.

changelog.d/5966.bugfix

@@ -0,0 +1 @@
+Fix admin API for listing media in a room not being available with an external media repo.

changelog.d/5967.bugfix

@@ -0,0 +1 @@
+Fix list media admin API always returning an error.

changelog.d/5969.feature

@@ -0,0 +1 @@
+Replace `trust_identity_server_for_password_resets` config option with `account_threepid_delegates`.

changelog.d/5970.docker

@@ -0,0 +1 @@
+Avoid changing UID/GID if they are already correct.

changelog.d/5971.bugfix

@@ -0,0 +1 @@
+Fix room and user stats tracking.

changelog.d/5975.misc

@@ -0,0 +1 @@
+Cleanup event auth type initialisation.

changelog.d/5980.feature

@@ -0,0 +1 @@
+Add POST /_matrix/client/r0/account/3pid/unbind endpoint from MSC2140 for unbinding a 3PID from an identity server without removing it from the homeserver user account.

changelog.d/5981.feature

@@ -0,0 +1 @@
+Setting metrics_flags.known_servers to True in the configuration will publish the synapse_federation_known_servers metric over Prometheus. This represents the total number of servers your server knows about (i.e. is in rooms with), including itself.

changelog.d/5982.bugfix

@@ -0,0 +1 @@
+Include missing opentracing contexts in outbout replication requests.

changelog.d/5983.feature

@@ -0,0 +1 @@
+Add minimum opentracing for client servlets.

changelog.d/5984.bugfix

@@ -0,0 +1 @@
+Fix sending of EDUs when opentracing is enabled with an empty whitelist.

changelog.d/5985.feature

@@ -0,0 +1 @@
+Check at setup that opentracing is installed if it's enabled in the config.

changelog.d/5986.feature

@@ -0,0 +1 @@
+Trace replication send times.

changelog.d/5988.bugfix

@@ -0,0 +1 @@
+Fix invalid references to None while opentracing if the log context slips.

changelog.d/5989.misc

@@ -0,0 +1 @@
+Clean up dependency checking at setup.

changelog.d/5991.bugfix

@@ -0,0 +1 @@
+Fix invalid references to None while opentracing if the log context slips.

changelog.d/5993.feature

@@ -0,0 +1 @@
+Add the ability to send registration emails from the homeserver rather than delegating to an identity server.

changelog.d/5994.feature

@@ -0,0 +1 @@
+Add the ability to send registration emails from the homeserver rather than delegating to an identity server.

changelog.d/5995.bugfix

@@ -0,0 +1 @@
+Return a M_MISSING_PARAM if `sid` is not provided to `/account/3pid`.

changelog.d/5998.bugfix

@@ -0,0 +1 @@
+Fix room and user stats tracking.

changelog.d/6003.misc

@@ -0,0 +1 @@
+Add opentracing span over HTTP push processing.

changelog.d/6004.bugfix

@@ -0,0 +1 @@
+Only count real users when checking for auto-creation of auto-join room.

changelog.d/6005.feature

@@ -0,0 +1 @@
+The new Prometheus metric `synapse_build_info` exposes the Python version, OS version, and Synapse version of the running server.

changelog.d/6009.misc

@@ -0,0 +1 @@
+Small refactor of function arguments and docstrings in RoomMemberHandler.

changelog.d/6010.misc

@@ -0,0 +1 @@
+Remove unused `origin` argument on FederationHandler.add_display_name_to_third_party_invite.

changelog.d/6011.feature

@@ -0,0 +1 @@
+Use account_threepid_delegate.email and account_threepid_delegate.msisdn for validating threepid sessions.

changelog.d/6012.feature

@@ -0,0 +1 @@
+Add report_stats_endpoint option to configure where stats are reported to, if enabled. Contributed by @Sorunome.