This looks like a copy/paste error: the function doesn't reject anything, but instead allows the action count to go through regardless. The remainder of the function's documentation appears correct.
We don't necessarily have `instance_name` for old events (before we
support multiple event persisters). We treat those as if the
`instance_name` was "master".
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
`bump_stamp` corresponds to the `stream_ordering` of the latest `DEFAULT_BUMP_EVENT_TYPES` in the room. This helps clients sort more readily without them needing to pull in a bunch of the timeline to determine the last activity. `bump_event_types` is a thing because for example, we don't want display name changes to mark the room as unread and bump it to the top. For encrypted rooms, we just have to consider any activity as a bump because we can't see the content and the client has to figure it out for themselves.
Outside of Synapse, `bump_stamp` is just a free-form counter so other implementations could use `received_ts`or `origin_server_ts` (see the [*Security considerations* section in MSC3575 about the potential pitfalls of using `origin_server_ts`](https://github.com/matrix-org/matrix-spec-proposals/blob/kegan/sync-v3/proposals/3575-sync.md#security-considerations)). It doesn't have any guarantee about always going up. In the Synapse case, it could go down if an event was redacted/removed (or purged in cases of retention policies).
In the future, we could add `bump_event_types` as [MSC3575](https://github.com/matrix-org/matrix-spec-proposals/pull/3575) mentions if people need to customize the event types.
---
In the Sliding Sync proxy, a similar [`timestamp` field was added](https://github.com/matrix-org/sliding-sync/pull/247) for the same purpose but the name is not obvious what it pertains to or what it's for.
The `timestamp` field was also added to Ruma in https://github.com/ruma/ruma/pull/1622
Follows on from @H-Shay's great work at
https://github.com/matrix-org/synapse/pull/15344 and MSC4026.
Also enables its use for MSC3881, mainly as an easy but concrete example
of how to use it.
This can help ensure that the rooms are eventually purged if the other
local users also forget them. Synapse already clears some of the room
information as part of the `_background_remove_left_rooms` background
task, but this doesn't catch `events`, `event_json`, etc.
Fixes https://github.com/element-hq/synapse/issues/17274, hopefully.
Basically, old versions of Synapse could advance streams without
persisting anything in the DB (fixed in #17229). On restart those
updates would get lost, and so the position of the stream would revert
to an older position. If this happened across an upgrade to a later
Synapse version which included #17215, then sync could get blocked
indefinitely (until the stream advanced to the position in the token).
We fix this by bounding the stream positions we'll wait for to the
maximum position of the underlying stream ID generator.
Fixes https://github.com/element-hq/synapse/issues/17274, hopefully.
Basically, old versions of Synapse could advance streams without
persisting anything in the DB (fixed in #17229). On restart those
updates would get lost, and so the position of the stream would revert
to an older position. If this happened across an upgrade to a later
Synapse version which included #17215, then sync could get blocked
indefinitely (until the stream advanced to the position in the token).
We fix this by bounding the stream positions we'll wait for to the
maximum position of the underlying stream ID generator.
If we leave the `.so` in place it causes the tests to fail, as it gets
picked up (instead of the newly built .so) and so fails with mismatched
GLIBC errors.
Sid now defaults to python3.12, and our pinned version of cffi (1.5.1)
does not have wheels for 3.12. This installing cffi to fail as we did
not have the correct libs installed to build from source.
Fix bug where we don't get new to-device from remote if they resent a
message we've already persisted and have recorded in the DB twice.
`device_federation_inbox` table doesn't have a unique index, and so we
can race and store an entry in there twice. If we do so then
`simple_select_one_txn` will throw an error due to the query returning
more than one row. We should add an unique index, but it doesn't really
matter so lets just handle the case of multiple rows correctly for now.
Fixes up #17333, where we failed to actually send less data (the
`DISTINCT` didn't work due to `stream_id` being different).
We fix this by making it so that every device list outbound poke for a
given user ID has the same stream ID. We can't change the query to only
return e.g. max stream ID as the receivers look up the destinations to
send to by doing `SELECT WHERE stream_id = ?`
This is #17291 (which got reverted), with some added fixups, and change
so that tests actually pick up the error.
The problem was that we were not calculating any new chain IDs due to a
missing `not` in a condition.
Reduce the replication traffic of device lists, by not sending every
destination that needs to be sent the device list update over
replication. Instead a "hosts to send to have been calculated"
notification over replication, and then federation senders read the
destinations from the DB.
For non federation senders this should heavily reduce the impact of a
user in many large rooms changing a device.
The parse_integer function was previously made to reject negative values by
default in https://github.com/element-hq/synapse/pull/16920, but the
documentation stated otherwise. This fixes the documentation and also:
- Removes explicit negative=False parameters from call sites.
- Brings the negative default of parse_integer_from_args in alignment with
parse_integer.
This reverts commit bdf82efea5 (#17291)
This seems to have stopped persisting auth chains for new events, and so
is causing state res to fall back to the slow methods
We calculate the auth chain links outside of the main persist event
transaction to ensure that we do not block other event sending during
the calculation.
This changes the release artefacts workflow to use `macos-12` runners
instead of `macos-11`, as the latter will be fully deprecated in a few
days.
This also updates `cibuildwheel` to a newer version, as it would not
'repair' the macOS wheels correctly
The difference is that now instead of outputting a macOS 11+ compatible
wheel, we output a macOS 12+ compatible one. This is fine, as macOS 11
is considered EOL since September 2023.
We can also expect that macOS 12 will be considered EOL in September
2024, as Apple usually supports the last 3 macOS version, and macOS 15
is scheduled to be released around that time.
Sort is no longer configurable and we always sort rooms by the `stream_ordering` of the last event in the room or the point where the user can see up to in cases of leave/ban/invite/knock.
Add `event.internal_metadata.instance_name` (the worker instance that persisted the event) to go alongside the existing `event.internal_metadata.stream_ordering`.
`instance_name` is useful to properly compare and query for events with a token since you need to compare both the `stream_ordering` and `instance_name` against the vector clock/`instance_map` in the `RoomStreamToken`.
This is pre-requisite work and may be used in https://github.com/element-hq/synapse/pull/17293
Adding `event.internal_metadata.instance_name` was first mentioned in the initial Sliding Sync PR while pairing with @erikjohnston, see 09609cb0db (diff-5cd773fb307aa754bd3948871ba118b1ef0303f4d72d42a2d21e38242bf4e096R405-R410)
PR where this was introduced: https://github.com/matrix-org/synapse/pull/14817
### What does this affect?
`get_last_event_in_room_before_stream_ordering(...)` is used in Sync v2 in a lot of different state calculations.
`get_last_event_in_room_before_stream_ordering(...)` is also used in `/rooms/{roomId}/members`
https://github.com/matrix-org/matrix-spec-proposals/pull/4151
This is intended to be enabled by default for immediate use. When FCP is
complete, the unstable endpoint will be dropped and stable endpoint
supported instead - no backwards compatibility is expected for the
unstable endpoint.
Spawning from https://github.com/element-hq/synapse/pull/17187#discussion_r1619492779 around wanting to put `SlidingSyncBody` (parse the request in the rest layer), `SlidingSyncConfig` (from the rest layer, pass to the handler), `SlidingSyncResponse` (pass the response from the handler back to the rest layer to respond) somewhere that doesn't contaminate the imports and cause circular import issues.
- Moved Pydantic parsing models to `synapse/types/rest`
- Moved handler types to `synapse/types/handlers`
If the stream ID in the unconverted table is ahead of the device lists
ID gen, then it can break all /sync requests that had an ID from ahead
of the table.
The fix is to make sure we add the unconverted table to the list of
tables we check at start up.
Broke in https://github.com/element-hq/synapse/pull/17229
Fixes: #17013
Add logging for whether room keys are replaced
This is motivated by the Crypto team who need to diagnose crypto issues.
The existing opentracing logging is not enough because it is not enabled
for all users.
Based on [MSC3575](https://github.com/matrix-org/matrix-spec-proposals/pull/3575): Sliding Sync
This iteration only focuses on returning the list of room IDs in the sliding window API (without sorting/filtering).
Rooms appear in the Sliding sync response based on:
- `invite`, `join`, `knock`, `ban` membership events
- Kicks (`leave` membership events where `sender` is different from the `user_id`/`state_key`)
- `newly_left` (rooms that were left during the given token range, > `from_token` and <= `to_token`)
- In order for bans/kicks to not show up, you need to `/forget` those rooms. This doesn't modify the event itself though and only adds the `forgotten` flag to `room_memberships` in Synapse. There isn't a way to tell when a room was forgotten at the moment so we can't factor it into the from/to range.
### Example request
`POST http://localhost:8008/_matrix/client/unstable/org.matrix.msc3575/sync`
```json
{
"lists": {
"foo-list": {
"ranges": [ [0, 99] ],
"sort": [ "by_notification_level", "by_recency", "by_name" ],
"required_state": [
["m.room.join_rules", ""],
["m.room.history_visibility", ""],
["m.space.child", "*"]
],
"timeline_limit": 100
}
}
}
```
Response:
```json
{
"next_pos": "s58_224_0_13_10_1_1_16_0_1",
"lists": {
"foo-list": {
"count": 1,
"ops": [
{
"op": "SYNC",
"range": [0, 99],
"room_ids": [
"!MmgikIyFzsuvtnbvVG:my.synapse.linux.server"
]
}
]
}
},
"rooms": {},
"extensions": {}
}
```
Use fully-qualified `PersistedEventPosition` (`instance_name` and `stream_ordering`) when returning `RoomsForUser` to facilitate proper comparisons and `RoomStreamToken` generation.
Spawning from https://github.com/element-hq/synapse/pull/17187 where we want to utilize this change
Otherwise things will get confused.
An alternative would be to make sure that for lagging stream we don't
return anything (and make sure the returned next_batch token doesn't go
backwards). But that is a faff.
We try and deduplicate in two places: 1) really early on, and 2) just
before we persist the event. The first case was broken due to it
occuring before the profile information was added, and so it thought the
event contents were different.
The second case did catch it and handle it correctly, however doing so
creates a redundant state group leading to bloat.
Fixes#3791
Fixes up #17239
We need to keep the spam check within the `try/except` block. Also makes
it so that we don't enter the top span twice.
Also also ensures that we get the right thumbnail length.
There is a problem with `StreamIdGenerator` where it can go backwards
over restarts when a stream ID is requested but then not inserted into
the DB. This is problematic if we want to land #17215, and is generally
a potential cause for all sorts of nastiness.
Instead of trying to fix `StreamIdGenerator`, we may as well move to
`MultiWriterIdGenerator` that does not suffer from this problem (the
latest positions are stored in `stream_positions` table). This involves
adding SQLite support to the class.
This only changes id generators that were already using
`MultiWriterIdGenerator` under postgres, a separate PR will move the
rest of the uses of `StreamIdGenerator` over.
Currently sending a to-device message to a user ID with a dodgy
destination is accepted, but then ends up spamming the logs when we try
and send to the destination.
An alternative would be to reject the request, but I'm slightly nervous
that could break things.
When a module rejects a piece of media we end up trying to close the
same logging context twice.
Instead of fixing the existing code we refactor to use an async context
manager, which is easier to write correctly.
The log format is the same as the request log format, except:
- fields that are specific to HTTP requests have been removed
- the task's params are included at the end of the log line.
These log lines are emitted:
- when the task function finishes — both completion and failure (and I
suppose it is possible for a task to become schedulable again?)
- every 5 minutes whilst it is running
Closes#17217.
---------
Signed-off-by: Olivier 'reivilibre <oliverw@matrix.org>
This PR ports the logic from the
[synapse_auto_accept_invite](https://github.com/matrix-org/synapse-auto-accept-invite)
module into synapse.
I went with the naive approach of injecting the "module" next to where
third party modules are currently loaded. If there is a better/preferred
way to handle this, I'm all ears. It wasn't obvious to me if there was a
better location to add this logic that would cleanly apply to all
incoming invite events.
Relies on https://github.com/element-hq/synapse/pull/17166 to fix linter
errors.
Re-introduces #17191, and includes #17197 and #17214
The basic idea is to stop calling `get_rooms_for_user` everywhere, and
instead use the table `device_lists_changes_in_room`.
Commits reviewable one-by-one.
Removed `request_key` from the `SyncConfig` (moved outside as its own function parameter) so it doesn't have to flow into `_generate_sync_entry_for_xxx` methods. This way we can separate the concerns of caching from generating the response and reuse the `_generate_sync_entry_for_xxx` functions as we see fit. Plus caching doesn't really have anything to do with the config of sync.
Split from https://github.com/element-hq/synapse/pull/17167
Spawning from https://github.com/element-hq/synapse/pull/17167#discussion_r1601497279
It's almost always more efficient to query the rooms that have device
list changes, rather than looking at the list of all users whose devices
have changed and then look for shared rooms.
Linter errors are showing up in #17147 that are unrelated to that PR.
The errors do not currently show up on develop.
This PR aims to resolve the linter errors separately from #17147.
This version change requires a migration to a new API. See
https://pyo3.rs/v0.21.2/migration#from-020-to-021
This will fix the annoying warnings added when using the recent rust
nightly:
> warning: non-local `impl` definition, they should be avoided as they
go against expectation
Bumps [jsonschema](https://github.com/python-jsonschema/jsonschema) from
4.21.1 to 4.22.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/python-jsonschema/jsonschema/releases">jsonschema's
releases</a>.</em></p>
<blockquote>
<h2>v4.22.0</h2>
<!-- raw HTML omitted -->
<h2>What's Changed</h2>
<ul>
<li>Improve <code>best_match</code> (and thereby error messages from
<code>jsonschema.validate</code>) in cases where there are multiple
<em>sibling</em> errors from applying <code>anyOf</code> /
<code>allOf</code> -- i.e. when multiple elements of a JSON array have
errors, we now do prefer showing errors from earlier elements rather
than simply showing an error for the full array (<a
href="https://redirect.github.com/python-jsonschema/jsonschema/issues/1250">#1250</a>).</li>
<li>(Micro-)optimize equality checks when comparing for JSON Schema
equality by first checking for object identity, as <code>==</code>
would.</li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/shinnar"><code>@shinnar</code></a> made
their first contribution in <a
href="https://redirect.github.com/python-jsonschema/jsonschema/pull/1224">python-jsonschema/jsonschema#1224</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/python-jsonschema/jsonschema/compare/v4.21.1...v4.22.0">https://github.com/python-jsonschema/jsonschema/compare/v4.21.1...v4.22.0</a></p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/python-jsonschema/jsonschema/blob/main/CHANGELOG.rst">jsonschema's
changelog</a>.</em></p>
<blockquote>
<h1>v4.22.0</h1>
<ul>
<li>Improve <code>best_match</code> (and thereby error messages from
<code>jsonschema.validate</code>) in cases where there are multiple
<em>sibling</em> errors from applying <code>anyOf</code> /
<code>allOf</code> -- i.e. when multiple elements of a JSON array have
errors, we now do prefer showing errors from earlier elements rather
than simply showing an error for the full array (<a
href="https://redirect.github.com/python-jsonschema/jsonschema/issues/1250">#1250</a>).</li>
<li>(Micro-)optimize equality checks when comparing for JSON Schema
equality by first checking for object identity, as <code>==</code>
would.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="9882dbeb1a"><code>9882dbe</code></a>
Add / ignore the new specification test suite property.</li>
<li><a
href="ebc90bb2df"><code>ebc90bb</code></a>
Merge commit '8fcfc3a674a7188a4fcc822b7a91efb3e0422a20'</li>
<li><a
href="8fcfc3a674"><code>8fcfc3a</code></a>
Squashed 'json/' changes from b41167c74..54f3784a8</li>
<li><a
href="30b7537944"><code>30b7537</code></a>
Pin pyenchant to pre from below until <a
href="https://redirect.github.com/pyenchant/pyenchant/issues/302">pyenchant/pyenchant#302</a>
is released.</li>
<li><a
href="c3729db732"><code>c3729db</code></a>
Enable doctests for the rest of the referencing page.</li>
<li><a
href="70a994ceab"><code>70a994c</code></a>
Remove a now-unneeded noqa since apparently this is fixed in new
ruff.</li>
<li><a
href="e6d0ef1cff"><code>e6d0ef1</code></a>
Fix a minor typo in the referencing example docs.</li>
<li><a
href="bceaf41a7d"><code>bceaf41</code></a>
Another placeholder benchmark for future optimization.</li>
<li><a
href="b20234e86c"><code>b20234e</code></a>
Consider errors from earlier indices (in instances) to be better
matches</li>
<li><a
href="41b49c68e5"><code>41b49c6</code></a>
Minor improvement to test failure message when a best match test
fails.</li>
<li>Additional commits viewable in <a
href="https://github.com/python-jsonschema/jsonschema/compare/v4.21.1...v4.22.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
When there have been lots of changes compared with the number of
entities, we can do a fast(er) path.
Locally I ran some benchmarking, and the comparison seems to give the
best determination of which method we use.
This change will apply the `email` & `picture` provided by OIDC to the
new user account when registering a new user via OIDC. If the user is
directed to the account details form, this change makes sure they have
been selected before applying them, otherwise they are omitted. In
particular, this change ensures the values are carried through when
Synapse has consent configured, and the redirect to the consent form/s
are followed.
I have tested everything manually. Including:
- with/without consent configured
- allowing/not allowing the use of email/avatar (via
`sso_auth_account_details.html`)
- with/without automatic account detail population (by un/commenting the
`localpart_template` option in synapse config).
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [X] Pull request is based on the develop branch
* [X] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [X] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
... when workers are unreachable, etc.
Fixes https://github.com/element-hq/synapse/issues/17117.
The general principle is just to make sure that we propagate any
exceptions to the JsonResource, so that we return an error code to the
sending server. That means that the sending server no longer considers
the message safely sent, so it will retry later.
In the issue, Erik mentions that an alternative solution would be to
persist the to-device messages into a table so that they can be retried.
This might be an improvement for performance, but even if we did that,
we still need this mechanism, since we might be unable to reach the
database. So, if we want to do that, it can be a later follow-up.
---------
Co-authored-by: Erik Johnston <erik@matrix.org>
Bumps [types-setuptools](https://github.com/python/typeshed) from
69.0.0.20240125 to 69.5.0.20240423.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/python/typeshed/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [idna](https://github.com/kjd/idna) from 3.6 to 3.7.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/kjd/idna/releases">idna's
releases</a>.</em></p>
<blockquote>
<h2>v3.7</h2>
<h2>What's Changed</h2>
<ul>
<li>Fix issue where specially crafted inputs to encode() could take
exceptionally long amount of time to process. [CVE-2024-3651]</li>
</ul>
<p>Thanks to Guido Vranken for reporting the issue.</p>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/kjd/idna/compare/v3.6...v3.7">https://github.com/kjd/idna/compare/v3.6...v3.7</a></p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/kjd/idna/blob/master/HISTORY.rst">idna's
changelog</a>.</em></p>
<blockquote>
<p>3.7 (2024-04-11)
++++++++++++++++</p>
<ul>
<li>Fix issue where specially crafted inputs to encode() could
take exceptionally long amount of time to process. [CVE-2024-3651]</li>
</ul>
<p>Thanks to Guido Vranken for reporting the issue.</p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="1d365e17e1"><code>1d365e1</code></a>
Release v3.7</li>
<li><a
href="c1b3154939"><code>c1b3154</code></a>
Merge pull request <a
href="https://redirect.github.com/kjd/idna/issues/172">#172</a> from
kjd/optimize-contextj</li>
<li><a
href="0394ec76ff"><code>0394ec7</code></a>
Merge branch 'master' into optimize-contextj</li>
<li><a
href="cd58a23173"><code>cd58a23</code></a>
Merge pull request <a
href="https://redirect.github.com/kjd/idna/issues/152">#152</a> from
elliotwutingfeng/dev</li>
<li><a
href="5beb28b9dd"><code>5beb28b</code></a>
More efficient resolution of joiner contexts</li>
<li><a
href="1b121483ed"><code>1b12148</code></a>
Update ossf/scorecard-action to v2.3.1</li>
<li><a
href="d516b874c3"><code>d516b87</code></a>
Update Github actions/checkout to v4</li>
<li><a
href="c095c75943"><code>c095c75</code></a>
Merge branch 'master' into dev</li>
<li><a
href="60a0a4cb61"><code>60a0a4c</code></a>
Fix typo in GitHub Actions workflow key</li>
<li><a
href="5918a0ef80"><code>5918a0e</code></a>
Merge branch 'master' into dev</li>
<li>Additional commits viewable in <a
href="https://github.com/kjd/idna/compare/v3.6...v3.7">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [serde](https://github.com/serde-rs/serde) from 1.0.198 to
1.0.199.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.199</h2>
<ul>
<li>Fix ambiguous associated item when
<code>forward_to_deserialize_any!</code> is used on an enum with
<code>Error</code> variant (<a
href="https://redirect.github.com/serde-rs/serde/issues/2732">#2732</a>,
thanks <a
href="https://github.com/aatifsyed"><code>@aatifsyed</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="1477028717"><code>1477028</code></a>
Release 1.0.199</li>
<li><a
href="789740be0d"><code>789740b</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2732">#2732</a>
from aatifsyed/master</li>
<li><a
href="8fe7539bb2"><code>8fe7539</code></a>
fix: ambiguous associated type in forward_to_deserialize_any!</li>
<li><a
href="f6623a3654"><code>f6623a3</code></a>
Ignore cast_precision_loss pedantic clippy lint</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.198...v1.0.199">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [furo](https://github.com/pradyunsg/furo) from 2024.1.29 to
2024.4.27.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/pradyunsg/furo/blob/main/docs/changelog.md">furo's
changelog</a>.</em></p>
<blockquote>
<h1>Changelog</h1>
<!-- raw HTML omitted -->
<h2>2024.04.27 -- Bold Burgundy</h2>
<ul>
<li>Add a skip to content link.</li>
<li>Add <code>--font-stack--headings</code>.</li>
<li>Add <code>:visited</code> colour and enforce uniform contrast
between light/dark.</li>
<li>Add an offset of <code>:target</code> to reduce back-to-top
overlap.</li>
<li>Improve dark mode colours.</li>
<li>Fix outstanding colour contrast warnings on Firefox.</li>
<li>Fix bad indent in footnotes.</li>
<li>Tweak handling of default configuration options in a more resilient
manner.</li>
<li>Tweak length and sizing of API <code>source</code> links.</li>
<li>Stop search engine indexing on search page.</li>
</ul>
<h2>2024.01.29 -- Amazing Amethyst</h2>
<ul>
<li>Fix canonical url when building with <code>dirhtml</code>.</li>
<li>Relicense the demo module.</li>
</ul>
<h2>2023.09.10 -- Zesty Zaffre</h2>
<ul>
<li>Make asset hash injection idempotent, fixing Sphinx 6
compatibility.</li>
<li>Fix the check for HTML builders, fixing non-HTML Read the Docs
builds.</li>
</ul>
<h2>2023.08.19 -- Xenolithic Xanadu</h2>
<ul>
<li>Fix missing search context with Sphinx 7.2, for dirhtml builds.</li>
<li>Drop support for Python 3.7.</li>
<li>Present configuration errors in a better format -- thanks <a
href="https://github.com/AA-Turner"><code>@AA-Turner</code></a>!</li>
<li>Bump <code>require_sphinx()</code> to Sphinx 6.0, in line with
dependency changes in Unassuming Ultramarine.</li>
</ul>
<h2>2023.08.17 -- Wonderous White</h2>
<ul>
<li>Fix compatiblity with Sphinx 7.2.0 and 7.2.1.</li>
</ul>
<h2>2023.07.26 -- Vigilant Volt</h2>
<ul>
<li>Fix compatiblity with Sphinx 7.1.</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="750fcd77fd"><code>750fcd7</code></a>
Prepare release: 2024.04.27</li>
<li><a
href="c0cb0200f0"><code>c0cb020</code></a>
Update changelog</li>
<li><a
href="3787a7c1f2"><code>3787a7c</code></a>
Patch <code>app.config</code> in a more resilient manner (<a
href="https://redirect.github.com/pradyunsg/furo/issues/783">#783</a>)</li>
<li><a
href="6a3afaba38"><code>6a3afab</code></a>
Indent all children of aside.footnote (<a
href="https://redirect.github.com/pradyunsg/furo/issues/788">#788</a>)</li>
<li><a
href="035b276516"><code>035b276</code></a>
fix: no index content on search page (<a
href="https://redirect.github.com/pradyunsg/furo/issues/784">#784</a>)</li>
<li><a
href="151f523271"><code>151f523</code></a>
[pre-commit.ci] pre-commit autoupdate (<a
href="https://redirect.github.com/pradyunsg/furo/issues/771">#771</a>)</li>
<li><a
href="2eb75aa20e"><code>2eb75aa</code></a>
Bump the github-actions group with 1 update (<a
href="https://redirect.github.com/pradyunsg/furo/issues/777">#777</a>)</li>
<li><a
href="df6f65c819"><code>df6f65c</code></a>
Bump the npm group with 6 updates (<a
href="https://redirect.github.com/pradyunsg/furo/issues/778">#778</a>)</li>
<li><a
href="0b51a5eebd"><code>0b51a5e</code></a>
Add space after period in ToC warning (<a
href="https://redirect.github.com/pradyunsg/furo/issues/776">#776</a>)</li>
<li><a
href="0188705150"><code>0188705</code></a>
Bump the npm group with 5 updates (<a
href="https://redirect.github.com/pradyunsg/furo/issues/770">#770</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/pradyunsg/furo/compare/2024.01.29...2024.04.27">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
This makes it easy to store UNIX sockets with correct permissions. Those
would be located in /run/synapse which is the directory used in many
examples in Synapse configuration manual. Additionally, the directory
and sockets are deleted when Synapse is shut down.
Bumps [serde_json](https://github.com/serde-rs/json) from 1.0.115 to
1.0.116.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.116</h2>
<ul>
<li>Make module structure comprehensible to static analysis (<a
href="https://redirect.github.com/serde-rs/json/issues/1124">#1124</a>,
thanks <a
href="https://github.com/mleonhard"><code>@mleonhard</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="a3f62bb10e"><code>a3f62bb</code></a>
Release 1.0.116</li>
<li><a
href="12c8ee0ce6"><code>12c8ee0</code></a>
Hide "non-exhaustive patterns" errors when crate fails to
compile</li>
<li><a
href="051ce970fe"><code>051ce97</code></a>
Merge pull request 1124 from mleonhard/master</li>
<li><a
href="25dc75050a"><code>25dc750</code></a>
Replace <code>features_check</code> mod with a call to
<code>std::compile_error!</code>. Fixes htt...</li>
<li><a
href="2e15e3d7d5"><code>2e15e3d</code></a>
Revert "Temporarily disable miri on doctests"</li>
<li><a
href="0baba28775"><code>0baba28</code></a>
Resolve legacy_numeric_constants clippy lints</li>
<li>See full diff in <a
href="https://github.com/serde-rs/json/compare/v1.0.115...v1.0.116">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [serde](https://github.com/serde-rs/serde) from 1.0.197 to
1.0.198.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.198</h2>
<ul>
<li>Support serializing and deserializing
<code>Saturating<T></code> (<a
href="https://redirect.github.com/serde-rs/serde/issues/2709">#2709</a>,
thanks <a
href="https://github.com/jbethune"><code>@jbethune</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="c4fb923335"><code>c4fb923</code></a>
Release 1.0.198</li>
<li><a
href="65b7eea775"><code>65b7eea</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2729">#2729</a>
from dtolnay/saturating</li>
<li><a
href="01cd696fd1"><code>01cd696</code></a>
Integrate Saturating<T> deserialization into impl_deserialize_num
macro</li>
<li><a
href="c13b3f7e68"><code>c13b3f7</code></a>
Format PR 2709</li>
<li><a
href="a6571ee0da"><code>a6571ee</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2709">#2709</a>
from jbethune/master</li>
<li><a
href="6e38afff49"><code>6e38aff</code></a>
Revert "Temporarily disable miri on doctests"</li>
<li><a
href="3d1b19ed90"><code>3d1b19e</code></a>
Implement Ser+De for <code>Saturating\<T></code></li>
<li><a
href="5b24f88e73"><code>5b24f88</code></a>
Resolve legacy_numeric_constants clippy lints</li>
<li><a
href="74d06708dd"><code>74d0670</code></a>
Explicitly install a Rust toolchain for cargo-outdated job</li>
<li><a
href="3bfab6ef7f"><code>3bfab6e</code></a>
Temporarily disable miri on doctests</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/serde/compare/v1.0.197...v1.0.198">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [types-bleach](https://github.com/python/typeshed) from 6.1.0.1 to
6.1.0.20240331.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/python/typeshed/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps
[phonenumbers](https://github.com/daviddrysdale/python-phonenumbers)
from 8.13.29 to 8.13.35.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="9369ff4607"><code>9369ff4</code></a>
Prep for 8.13.35 release</li>
<li><a
href="2e1e133890"><code>2e1e133</code></a>
Generated files for metadata</li>
<li><a
href="25a306f670"><code>25a306f</code></a>
Merge metadata changes from upstream 8.13.35</li>
<li><a
href="710529234b"><code>7105292</code></a>
Prep for 8.13.34 release</li>
<li><a
href="e7b328d071"><code>e7b328d</code></a>
Generated files for metadata</li>
<li><a
href="315eb10e00"><code>315eb10</code></a>
Merge metadata changes from upstream 8.13.34</li>
<li><a
href="29dab756ac"><code>29dab75</code></a>
Prep for 8.13.33 release</li>
<li><a
href="f5b9401fdb"><code>f5b9401</code></a>
Generated files for metadata</li>
<li><a
href="aa21158f8d"><code>aa21158</code></a>
Merge metadata changes from upstream 8.13.33</li>
<li><a
href="92c242c2b4"><code>92c242c</code></a>
Prep for 8.13.32 release</li>
<li>Additional commits viewable in <a
href="https://github.com/daviddrysdale/python-phonenumbers/compare/v8.13.29...v8.13.35">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Weakness in auth chain indexing allows DoS from remote room members
through disk fill and high CPU usage.
A remote Matrix user with malicious intent, sharing a room with Synapse
instances before 1.104.1, can dispatch specially crafted events to
exploit a weakness in how the auth chain cover index is calculated. This
can induce high CPU consumption and accumulate excessive data in the
database of such instances, resulting in a denial of service.
Servers in private federations, or those that do not federate, are not
affected.
Bumps [types-pillow](https://github.com/python/typeshed) from
10.2.0.20240406 to 10.2.0.20240415.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/python/typeshed/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [pyasn1-modules](https://github.com/pyasn1/pyasn1-modules) from
0.3.0 to 0.4.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/pyasn1/pyasn1-modules/releases">pyasn1-modules's
releases</a>.</em></p>
<blockquote>
<h2>Release 0.4.0</h2>
<p>It's a major release where we drop Python 2 support entirely.
The most significant changes are:</p>
<ul>
<li>Added support for Python 3.11, 3.12</li>
<li>Removed support for EOL Pythons 2.7, 3.6, 3.7</li>
</ul>
<p>A full list of changes can be seen in the <a
href="https://github.com/pyasn1/pyasn1-modules/blob/main/CHANGES.txt">CHANGELOG</a>.</p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/pyasn1/pyasn1-modules/blob/main/CHANGES.txt">pyasn1-modules's
changelog</a>.</em></p>
<blockquote>
<h2>Revision 0.4.0, released 26-03-2024</h2>
<ul>
<li>Added support for Python 3.11, 3.12</li>
<li>Removed support for EOL Pythons 2.7, 3.6, 3.7</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="98b1e268a3"><code>98b1e26</code></a>
Prepare release 0.4.0</li>
<li><a
href="0339532a08"><code>0339532</code></a>
Drop support for EOL Python 3.6 and 3.7 (<a
href="https://redirect.github.com/pyasn1/pyasn1-modules/issues/14">#14</a>)</li>
<li><a
href="9ec5409154"><code>9ec5409</code></a>
Drop support for EOL Python 2.7 (<a
href="https://redirect.github.com/pyasn1/pyasn1-modules/issues/12">#12</a>)</li>
<li><a
href="252ac00bf1"><code>252ac00</code></a>
Add support for Python 3.12 (<a
href="https://redirect.github.com/pyasn1/pyasn1-modules/issues/11">#11</a>)</li>
<li>See full diff in <a
href="https://github.com/pyasn1/pyasn1-modules/compare/v0.3.0...v0.4.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [anyhow](https://github.com/dtolnay/anyhow) from 1.0.81 to 1.0.82.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/anyhow/releases">anyhow's
releases</a>.</em></p>
<blockquote>
<h2>1.0.82</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="074bdea1c7"><code>074bdea</code></a>
Release 1.0.82</li>
<li><a
href="47a4fbfa36"><code>47a4fbf</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/anyhow/issues/360">#360</a>
from dtolnay/docensure</li>
<li><a
href="c5af1db020"><code>c5af1db</code></a>
Make ensure's doc comment apply to the cfg(not(doc)) macro too</li>
<li><a
href="bebc7a2fe4"><code>bebc7a2</code></a>
Revert "Temporarily disable miri on doctests"</li>
<li><a
href="f2c4db9b47"><code>f2c4db9</code></a>
Update ui test suite to nightly-2024-03-31</li>
<li><a
href="028cbeedf5"><code>028cbee</code></a>
Explicitly install a Rust toolchain for cargo-outdated job</li>
<li><a
href="7a4cac5192"><code>7a4cac5</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/anyhow/issues/358">#358</a>
from dtolnay/workspacewrapper</li>
<li><a
href="939db012c2"><code>939db01</code></a>
Apply RUSTC_WORKSPACE_WRAPPER</li>
<li><a
href="9f84a37551"><code>9f84a37</code></a>
Temporarily disable miri on doctests</li>
<li><a
href="45e5a589e9"><code>45e5a58</code></a>
Ignore dead code lint in test</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/anyhow/compare/1.0.81...1.0.82">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
This adds functions to transform a Twisted request to the
`http::Request`, and then to send back an `http::Response` through it.
It also imports the SynapseError exception so that we can throw that
from Rust code directly
Example usage of this would be:
```rust
use crate::http::{http_request_from_twisted, http_response_to_twisted, HeaderMapPyExt};
fn handler(twisted_request: &PyAny) -> PyResult<()> {
let request = http_request_from_twisted(twisted_request)?;
let ua: headers::UserAgent = request.headers().typed_get_required()?;
if whatever {
return Err((crate::errors::SynapseError::new(
StatusCode::UNAUTHORIZED,
"Whatever".to_owned
"M_UNAUTHORIZED",
None,
None,
)));
}
let response = Response::new("hello".as_bytes());
http_response_to_twisted(twisted_request, response)?;
Ok(())
}
```
Resurrecting https://github.com/matrix-org/synapse/pull/13918.
This should reduce IOPs incurred by joining to the events table to
lookup stream ordering, which happens in many receipt handling code
paths. Like the previous PR I believe sufficient time has passed between
the original migration in DB schema 72 and now to merge this as-is. It's
highly unlikely that both the migration is still ongoing AND (active)
users still have any receipts prior to that date.
In the unlikely event there is a receipt without a populated
`event_stream_ordering` synapse will behave just as it does now when
receipts exist for events that don't (yet): for push action calculation
the receipts are just ignored.
I've removed the validation on event IDs as this is already covered
here:
59ceabcb97/synapse/handlers/receipts.py (L189-L192)
PR #16942 removed an invalid optimisation that avoided pulling out state
for non-gappy syncs. This causes a large increase in DB usage. c.f.
#16941 for why that optimisation was wrong.
However, we can still optimise in the simple case where the events in
the timeline are a linear chain without any branching/merging of the
DAG.
cc. @richvdh
Before we were pulling out *all* read receipts for a user for every
event we pushed. Instead let's only pull out the relevant receipts.
This also pulled out the event rows for each receipt, causing load on
the events table.
This PR fixes a very, very niche edge-case, but I've got some more work
coming which will otherwise make the problem worse.
The bug happens when the syncing user leaves a room, and has a sync
filter which includes "left" rooms, but sets the timeline limit to 0. In
that case, the state returned in the `state` section is calculated
incorrectly.
The fix is to pass a token corresponding to the point that the user
leaves the room through to `compute_state_delta`.
Requests may require a User-Agent header, and the change in #16972
accidentally removed it, resulting in requests getting rejected causing
login to fail.
Fixes https://github.com/element-hq/synapse/issues/16680, as well as a
related bug, where servers which we had *never* successfully sent an
event to would not be retried.
In order to fix the case of pending to-device messages, we hook into the
existing `wake_destinations_needing_catchup` process, by extending it to
look for destinations that have pending to-device messages. The
federation transmission loop then attempts to send the pending to-device
messages as normal.
When running unit tests, we patch the database connection pool so that
it runs queries "synchronously". This is ok, except that if any queries
are launched before we do the patching, those queries get left in limbo
and never complete.
To fix this, let's change the way we do the switcheroo, by patching out
the method which creates the connection pool in the first place.
I have a use case where I'd like the Synapse image to start up a
postgres instance that I can use, but don't want to force Synapse to use
postgres as well.
This commit prevents postgres from being started when it has already
been explicitly enabled elsewhere.
When a lot of locks are waiting for a single lock, notifying all locks
independently with `call_later` on each release is really costly and
incurs some kind of async contention, where the CPU is spinning a lot
for not much.
The included test is taking around 30s before the change, and 0.5s
after.
It was found following failing tests with
https://github.com/element-hq/synapse/pull/16827.
Background: we have a `matrixdotorg/synapse-workers` docker image, which
is intended for running multiple workers within the same container. That
image includes a `prefix-log` script which, for each line printed to
stdout or stderr by one of the processes, prepends the name of the
process.
This commit disables buffering in that script, so that lines are logged
quickly after they are printed. This makes it much easier to understand
the output, since they then come out in a natural order.
This PR aims to fix#16895, caused by a regression in #7 and not fixed
by #16903. The PR #16903 only fixes a starvation issue, where the CPU
isn't released. There is a second issue, where the execution is blocked.
This theory is supported by the flame graphs provided in #16895 and the
fact that I see the CPU usage reducing and far below the limit.
Since the changes in #7, the method `check_state_independent_auth_rules`
is called with the additional parameter `batched_auth_events`:
6fa13b4f92/synapse/handlers/federation_event.py (L1741-L1743)
It makes the execution enter this if clause, introduced with #151956fa13b4f92/synapse/event_auth.py (L178-L189)
There are two issues in the above code snippet.
First, there is the blocking issue. I'm not entirely sure if this is a
deadlock, starvation, or something different. In the beginning, I
thought the copy operation was responsible. It wasn't. Then I
investigated the nested `store.get_events` inside the function `update`.
This was also not causing the blocking issue. Only when I replaced the
set difference operation (`-` ) with a list comprehension, the blocking
was resolved. Creating and comparing sets with a very large amount of
events seems to be problematic.
This is how the flamegraph looks now while persisting outliers. As you
can see, the execution no longer locks up in the above function.
Second, the copying here doesn't serve any purpose, because only a
shallow copy is created. This means the same objects from the original
dict are referenced. This fails the intention of protecting these
objects from mutation. The review of the original PR
https://github.com/matrix-org/synapse/pull/15195 had an extensive
discussion about this matter.
Various approaches to copying the auth_events were attempted:
1) Implementing a deepcopy caused issues due to
builtins.EventInternalMetadata not being pickleable.
2) Creating a dict with new objects akin to a deepcopy.
3) Creating a dict with new objects containing only necessary
attributes.
Concluding, there is no easy way to create an actual copy of the
objects. Opting for a deepcopy can significantly strain memory and CPU
resources, making it an inefficient choice. I don't see why the copy is
necessary in the first place. Therefore I'm proposing to remove it
altogether.
After these changes, I was able to successfully join these rooms,
without the main worker locking up:
- #synapse:matrix.org
- #element-android:matrix.org
- #element-web:matrix.org
- #ecips:matrix.org
- #ipfs-chatter:ipfs.io
- #python:matrix.org
- #matrix:matrix.org
Since Synapse 1.76.0, any module which registers a `on_new_event`
callback would brick the ability to join remote rooms.
This is because this callback tried to get the full state of the room,
which would end up in a deadlock.
Related:
https://github.com/matrix-org/synapse-auto-accept-invite/issues/18
The following module would brick the ability to join remote rooms:
```python
from typing import Any, Dict, Literal, Union
import logging
from synapse.module_api import ModuleApi, EventBase
logger = logging.getLogger(__name__)
class MyModule:
def __init__(self, config: None, api: ModuleApi):
self._api = api
self._config = config
self._api.register_third_party_rules_callbacks(
on_new_event=self.on_new_event,
)
async def on_new_event(self, event: EventBase, _state_map: Any) -> None:
logger.info(f"Received new event: {event}")
@staticmethod
def parse_config(_config: Dict[str, Any]) -> None:
return None
```
This is technically a breaking change, as we are now passing partial
state on the `on_new_event` callback.
However, this callback was broken for federated rooms since 1.76.0, and
local rooms have full state anyway, so it's unlikely that it would
change anything.
This adds a counter `synapse_emails_sent_total` for emails sent. They
are broken down by `type`, which are `password_reset`, `registration`,
`add_threepid`, `notification` (matching the methods of `Mailer`).
We do this by adding support to the LRU cache for "extra indices" based
on the cached value. This allows us to efficiently map from room ID to
the cached events and only invalidate those.
List of users not to send out device list updates for when they register
new devices. This is useful to handle bot accounts.
This is undocumented as its mostly a hack to test on matrix.org.
Note: This will still send out device list updates if the device is
later updated, e.g. end to end keys are added.
Bumps [bcrypt](https://github.com/pyca/bcrypt) from 4.0.1 to 4.1.2.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="b9223e61e2"><code>b9223e6</code></a>
Try building py39 wheels to see if that helps with reinitialization
errors (#...</li>
<li><a
href="5049783444"><code>5049783</code></a>
Bump syn from 2.0.40 to 2.0.41 in /src/_bcrypt (<a
href="https://redirect.github.com/pyca/bcrypt/issues/696">#696</a>)</li>
<li><a
href="642d070972"><code>642d070</code></a>
Bump syn from 2.0.39 to 2.0.40 in /src/_bcrypt (<a
href="https://redirect.github.com/pyca/bcrypt/issues/693">#693</a>)</li>
<li><a
href="8b44a1046a"><code>8b44a10</code></a>
Bump libc from 0.2.150 to 0.2.151 in /src/_bcrypt (<a
href="https://redirect.github.com/pyca/bcrypt/issues/692">#692</a>)</li>
<li><a
href="951cc64d0c"><code>951cc64</code></a>
Bump once_cell from 1.18.0 to 1.19.0 in /src/_bcrypt (<a
href="https://redirect.github.com/pyca/bcrypt/issues/690">#690</a>)</li>
<li><a
href="7377c6db3a"><code>7377c6d</code></a>
Bump actions/setup-python from 4.8.0 to 5.0.0 (<a
href="https://redirect.github.com/pyca/bcrypt/issues/689">#689</a>)</li>
<li><a
href="61b32039d4"><code>61b3203</code></a>
Bump actions/setup-python from 4.7.1 to 4.8.0 (<a
href="https://redirect.github.com/pyca/bcrypt/issues/688">#688</a>)</li>
<li><a
href="1c3159a28a"><code>1c3159a</code></a>
Fixed wheels for older versions of macOS (<a
href="https://redirect.github.com/pyca/bcrypt/issues/687">#687</a>)</li>
<li><a
href="1a41437d3a"><code>1a41437</code></a>
Update README.rst (<a
href="https://redirect.github.com/pyca/bcrypt/issues/682">#682</a>)</li>
<li><a
href="7881c5beef"><code>7881c5b</code></a>
Fix building windows abi3 wheels (<a
href="https://redirect.github.com/pyca/bcrypt/issues/681">#681</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/pyca/bcrypt/compare/4.0.1...4.1.2">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
This basically reverts a change that was in
https://github.com/element-hq/synapse/pull/16833, where we reduced the
batching.
The smaller batching can cause performance issues on busy servers and
databases.
Partially reverts #16796
This is causing errors of the form:
```
Error: Failed to CreateArtifact: Received non-retryable error: Failed request: (409) Conflict: an artifact with this name already exists on the workflow run
```
for the debs and wheels stages.
There were breaking changes that weren't included in the dependabot
changelog (:/):
https://github.com/actions/upload-artifact#breaking-changes
<!--
Fixes: # <!-- -->
<!--
Supersedes: # <!-- -->
<!--
Follows: # <!-- -->
<!--
Part of: # <!-- -->
Base: `release-v1.100` <!-- git-stack-base-branch:release-v1.100 -->
<!--
This pull request is commit-by-commit review friendly. <!-- -->
<!--
This pull request is intended for commit-by-commit review. <!-- -->
Original commit schedule, with full messages:
<ol>
<li>
Downgrade the `upload-artifact` and `download-artifact` actions to v3
</li>
</ol>
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
During the migration the automated script to update the copyright
headers accidentally got rid of some of the existing copyright lines.
Reinstate them.
Pulled out of #16803 since the drive-by cleanup was maybe not as
drive-by as I had hoped.
<!--
Fixes: # <!-- -->
<!--
Supersedes: # <!-- -->
<!--
Follows: # <!-- -->
<!--
Part of: # <!-- -->
Base: `develop` <!-- git-stack-base-branch:develop -->
<!--
This pull request is commit-by-commit review friendly. <!-- -->
<!--
This pull request is intended for commit-by-commit review. <!-- -->
Original commit schedule, with full messages:
<ol>
<li>
Add a --generate-only option
</li>
</ol>
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
Prior to this PR, if a request to create a public (public as in
published to the rooms directory) room violated the room list
publication rules set in the
[config](https://matrix-org.github.io/synapse/latest/usage/configuration/config_documentation.html#room_list_publication_rules),
the request to create the room was denied and the room was not created.
This PR changes the behavior such that when a request to create a room
published to the directory violates room list publication rules, the
room is still created but the room is not published to the directory.
The current query supports passing in a list of users, which generates a
query using `user_id = ANY(..)`. This is generates a less efficient
query plan that is notably slower than a simple `user_id = ?` condition.
Note: The new function is mostly a copy and paste and then a
simplification of the existing function.
The crux of the change is to try and make the queries simpler and pull
out fewer rows. Before, there were quite a few joins against subqueries,
which caused postgres to pull out more rows than necessary.
Instead, let's simplify the query and do some of the filtering out in
Python instead, letting Postgres do better optimizations now that it
doesn't have to deal with joins against subqueries.
Review note: this is a complete rewrite of the function, so not sure how
useful the diff is.
---------
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
In previous versions of authlib using `client_secret_basic` without a
`client_secret` would result in an invalid auth header. Since authlib
1.3 it throws an exception.
The configuration may be accepted in by very lax servers, so we don't
want to deny it outright. Instead, let's default the
`client_auth_method` to `none`, which does the right thing. If the
config specifies `client_auth_method` and no `client_secret` then that
is going to be bogus and we should reject it
Bumps [types-commonmark](https://github.com/python/typeshed) from
0.9.2.4 to 0.9.2.20240106.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/python/typeshed/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [pyo3](https://github.com/pyo3/pyo3) from 0.20.0 to 0.20.2.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/pyo3/pyo3/releases">pyo3's
releases</a>.</em></p>
<blockquote>
<h2>PyO3 0.20.2</h2>
<p>This release corrects a failure to compile of the <code>either</code>
feature when the <code>experimental-inspect</code> feature is not
enabled.</p>
<p>It also adds backwards-compatibility for <code>pyo3</code> 0.20.0 to
build against <code>pyo3-build-config</code> 0.20.2, as
<code>pyo3</code> 0.20.0 was (unintentionally) not pinned against an
exact patch version <code>pyo3-build-config</code>, and
<code>pyo3</code> 0.20.0 could not build against
<code>pyo3-build-config</code> 0.20.1 due to an internal API
adjustment.</p>
<p>Thank you to the following users for the improvements:</p>
<p><a
href="https://github.com/adamreichold"><code>@adamreichold</code></a>
<a
href="https://github.com/davidhewitt"><code>@davidhewitt</code></a></p>
<h2>PyO3 0.20.1</h2>
<p>This release is a maintenance release to resolve <a
href="https://redirect.github.com/rust-lang/rust-clippy/issues/12039">a
clippy warning</a> which triggers on function arguments of
<code>Py<Self></code>.</p>
<p>This release also contains a few minor API additions, including
optional support for the <code>either</code> and <code>smallvec</code>
crates.</p>
<p>Thank you to the following users for the improvements:</p>
<p><a
href="https://github.com/adamreichold"><code>@adamreichold</code></a>
<a href="https://github.com/aldanor"><code>@aldanor</code></a>
<a href="https://github.com/alex"><code>@alex</code></a>
<a href="https://github.com/daemontus"><code>@daemontus</code></a>
<a href="https://github.com/davidhewitt"><code>@davidhewitt</code></a>
<a href="https://github.com/mejrs"><code>@mejrs</code></a>
<a href="https://github.com/messense"><code>@messense</code></a>
<a href="https://github.com/neachdainn"><code>@neachdainn</code></a>
<a href="https://github.com/orhun"><code>@orhun</code></a>
<a
href="https://github.com/suriya-ganesh"><code>@suriya-ganesh</code></a>
<a href="https://github.com/wyfo"><code>@wyfo</code></a></p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/PyO3/pyo3/blob/main/CHANGELOG.md">pyo3's
changelog</a>.</em></p>
<blockquote>
<h2>[0.20.2] - 2024-01-04</h2>
<h3>Packaging</h3>
<ul>
<li>Pin <code>pyo3</code> and <code>pyo3-ffi</code> dependencies on
<code>pyo3-build-config</code> to require the same patch version, i.e.
<code>pyo3</code> 0.20.2 requires <em>exactly</em>
<code>pyo3-build-config</code> 0.20.2. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3721">#3721</a></li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Fix compile failure when building <code>pyo3</code> 0.20.0 with
latest <code>pyo3-build-config</code> 0.20.X. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3724">#3724</a></li>
<li>Fix docs.rs build. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3722">#3722</a></li>
</ul>
<h2>[0.20.1] - 2023-12-30</h2>
<h3>Added</h3>
<ul>
<li>Add optional <code>either</code> feature to add conversions for
<code>either::Either<L, R></code> sum type. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3456">#3456</a></li>
<li>Add optional <code>smallvec</code> feature to add conversions for
<code>smallvec::SmallVec</code>. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3507">#3507</a></li>
<li>Add <code>take</code> and <code>into_inner</code> methods to
<code>GILOnceCell</code> <a
href="https://redirect.github.com/PyO3/pyo3/pull/3556">#3556</a></li>
<li><code>#[classmethod]</code> methods can now also receive
<code>Py<PyType></code> as their first argument. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3587">#3587</a></li>
<li><code>#[pyfunction(pass_module)]</code> can now also receive
<code>Py<PyModule></code> as their first argument. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3587">#3587</a></li>
<li>Add <code>traverse</code> method to <code>GILProtected</code>. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3616">#3616</a></li>
<li>Added <code>abi3-py312</code> feature <a
href="https://redirect.github.com/PyO3/pyo3/pull/3687">#3687</a></li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Fix minimum version specification for optional <code>chrono</code>
dependency. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3512">#3512</a></li>
<li>Silenced new <code>clippy::unnecessary_fallible_conversions</code>
warning when using a <code>Py<Self></code> <code>self</code>
receiver. <a
href="https://redirect.github.com/PyO3/pyo3/pull/3564">#3564</a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="bcef18b988"><code>bcef18b</code></a>
release: 0.20.2</li>
<li><a
href="fa6d60b77e"><code>fa6d60b</code></a>
Use a definite version specification when depending on
pyo3-build-config.</li>
<li><a
href="f9f0bdde70"><code>f9f0bdd</code></a>
Merge pull request <a
href="https://redirect.github.com/pyo3/pyo3/issues/3724">#3724</a> from
davidhewitt/fix-build-config-issue</li>
<li><a
href="cf213252fa"><code>cf21325</code></a>
re-add emit_pyo3_cfgs for pyo3 0.20.0 compatibility</li>
<li><a
href="f7893858d2"><code>f789385</code></a>
Merge pull request <a
href="https://redirect.github.com/pyo3/pyo3/issues/3722">#3722</a> from
PyO3/fix-doc-build</li>
<li><a
href="9120b35f35"><code>9120b35</code></a>
Include the experimental-inspect feature for the docs.rs build thereby
making...</li>
<li><a
href="2e79c557cc"><code>2e79c55</code></a>
Add CI job to test the equivalent of a docs.rs build.</li>
<li><a
href="2564ca4e75"><code>2564ca4</code></a>
Fix missing feature flags in implementation of Either conversion.</li>
<li><a
href="be4d5627a3"><code>be4d562</code></a>
Merge pull request <a
href="https://redirect.github.com/pyo3/pyo3/issues/3713">#3713</a> from
PyO3/release-0.20.1</li>
<li><a
href="d3f034a80f"><code>d3f034a</code></a>
release: 0.20.1</li>
<li>Additional commits viewable in <a
href="https://github.com/pyo3/pyo3/compare/v0.20.0...v0.20.2">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Sometimes we fail to fetch events during backfill due to missing state,
and we often end up querying the same bad events periodically (as people
backpaginate). In such cases its likely we will continue to fail to get
the state, and therefore we should try *before* loading the state that
we have from the DB (as otherwise it's wasted DB and memory).
---------
Co-authored-by: reivilibre <oliverw@matrix.org>
Bumps [anyhow](https://github.com/dtolnay/anyhow) from 1.0.75 to 1.0.79.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/anyhow/releases">anyhow's
releases</a>.</em></p>
<blockquote>
<h2>1.0.79</h2>
<ul>
<li>Work around improperly cached build script result by sccache (<a
href="https://redirect.github.com/dtolnay/anyhow/issues/340">#340</a>)</li>
</ul>
<h2>1.0.78</h2>
<ul>
<li>Reduce spurious rebuilds under RustRover IDE when using a nightly
toolchain (<a
href="https://redirect.github.com/dtolnay/anyhow/issues/337">#337</a>)</li>
</ul>
<h2>1.0.77</h2>
<ul>
<li>Make <code>anyhow::Error::backtrace</code> available on stable Rust
compilers 1.65+ (<a
href="https://redirect.github.com/dtolnay/anyhow/issues/293">#293</a>,
thanks <a
href="https://github.com/LukasKalbertodt"><code>@LukasKalbertodt</code></a>)</li>
</ul>
<h2>1.0.76</h2>
<ul>
<li>Opt in to <code>unsafe_op_in_unsafe_fn</code> lint (<a
href="https://redirect.github.com/dtolnay/anyhow/issues/329">#329</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="71ab53dd2e"><code>71ab53d</code></a>
Release 1.0.79</li>
<li><a
href="60705a53ce"><code>60705a5</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/anyhow/issues/340">#340</a>
from dtolnay/depinfo</li>
<li><a
href="17e252bfdf"><code>17e252b</code></a>
Include env-dep:RUSTC_BOOTSTRAP in dep-info for sccache</li>
<li><a
href="04774c0894"><code>04774c0</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/anyhow/issues/338">#338</a>
from dtolnay/nightlyci</li>
<li><a
href="1fd290c222"><code>1fd290c</code></a>
Make CI verify that error_generic_member_access works in latest
nightly</li>
<li><a
href="ee414707be"><code>ee41470</code></a>
RUSTC must be set by Cargo for build script</li>
<li><a
href="38c79ef242"><code>38c79ef</code></a>
Release 1.0.78</li>
<li><a
href="ded2295ff5"><code>ded2295</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/anyhow/issues/337">#337</a>
from dtolnay/bootstrap</li>
<li><a
href="ae45b672c9"><code>ae45b67</code></a>
Do not rebuild on RUSTC_BOOTSTRAP changes on nightly compiler</li>
<li><a
href="2d32366f58"><code>2d32366</code></a>
Update crate name used for build script probe</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/anyhow/compare/1.0.75...1.0.79">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [serde_json](https://github.com/serde-rs/json) from 1.0.108 to
1.0.111.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.111</h2>
<ul>
<li>Improve floating point parsing performance on loongarch64 (<a
href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>,
thanks <a
href="https://github.com/heiher"><code>@heiher</code></a>)</li>
</ul>
<h2>v1.0.110</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
<h2>v1.0.109</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="0131ac6821"><code>0131ac6</code></a>
Release 1.0.111</li>
<li><a
href="96ecfadd3f"><code>96ecfad</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>
from heiher/limb-64-la64</li>
<li><a
href="c80dbaf8ff"><code>c80dbaf</code></a>
Set limb width to 64 for loongarch64</li>
<li><a
href="df5cf215b7"><code>df5cf21</code></a>
Release 1.0.110</li>
<li><a
href="c35856a93c"><code>c35856a</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="f88bf1fccb"><code>f88bf1f</code></a>
Release 1.0.109</li>
<li><a
href="bb62c73ece"><code>bb62c73</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1097">#1097</a>
from serde-rs/doccfg</li>
<li><a
href="df36d109fd"><code>df36d10</code></a>
Restore doc cfg on re-exports</li>
<li><a
href="c367091342"><code>c367091</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1095">#1095</a>
from dtolnay/hashtest</li>
<li><a
href="b328ee7df4"><code>b328ee7</code></a>
Eliminate hash closure in favor of calling hash_one directly</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/json/compare/v1.0.108...v1.0.111">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
There are two changes here:
1. Only pull out the required state when handling the request.
2. Change the get filtered state return type to check that we're only
querying state that was requested
---------
Co-authored-by: reivilibre <oliverw@matrix.org>
Bumps [types-jsonschema](https://github.com/python/typeshed) from
4.20.0.0 to 4.20.0.20240105.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/python/typeshed/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Instead of persisting outliers in a bunch of batches, let's just do them
all at once.
This is fine because all `_auth_and_persist_outliers_inner` is doing is
checking the auth rules for each event, which requires the events to be
topologically sorted by the auth graph.
Bumps [authlib](https://github.com/lepture/authlib) from 1.2.1 to 1.3.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/lepture/authlib/releases">authlib's
releases</a>.</em></p>
<blockquote>
<h2>Version 1.3.0</h2>
<p><strong>Bug fixes</strong></p>
<ul>
<li>Restore AuthorizationServer.create_authorization_response behavior,
via <a
href="https://redirect.github.com/lepture/authlib/issues/558">#558</a>
by <a
href="https://github.com/TurnrDev"><code>@TurnrDev</code></a></li>
<li>Include leeway in validate_iat() for JWT, via <a
href="https://redirect.github.com/lepture/authlib/issues/565">#565</a>
by <a href="https://github.com/dhallam"><code>@dhallam</code></a></li>
<li>Fix encode_client_secret_basic, via <a
href="https://redirect.github.com/lepture/authlib/issues/594">#594</a>
by <a href="https://github.com/Prilkop"><code>@Prilkop</code></a></li>
<li>Use single key in JWK if JWS does not specify kid, via <a
href="https://redirect.github.com/lepture/authlib/issues/596">#596</a>
by <a
href="https://github.com/dklimpel"><code>@dklimpel</code></a></li>
<li>Fix error when RFC9068 JWS has no scope field, via <a
href="https://redirect.github.com/lepture/authlib/issues/598">#598</a>
by <a
href="https://github.com/tanguilp"><code>@tanguilp</code></a></li>
<li>Get werkzeug version using importlib, via <a
href="https://redirect.github.com/lepture/authlib/issues/591">#591</a>
by <a
href="https://github.com/Sparrow0hawk"><code>@Sparrow0hawk</code></a></li>
</ul>
<p><strong>Breaking changes</strong></p>
<ul>
<li>RFC9068 implementation, via <a
href="https://redirect.github.com/lepture/authlib/issues/586">#586</a>
by <a href="https://github.com/azmeuk"><code>@azmeuk</code></a>.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/lepture/authlib/blob/master/docs/changelog.rst">authlib's
changelog</a>.</em></p>
<blockquote>
<h2>Version 1.3.0</h2>
<p><strong>Released on Dec 17, 2023</strong></p>
<ul>
<li>Restore
<code>AuthorizationServer.create_authorization_response</code> behavior,
via :PR:<code>558</code></li>
<li>Include <code>leeway</code> in <code>validate_iat()</code> for JWT,
via :PR:<code>565</code></li>
<li>Fix <code>encode_client_secret_basic</code>, via
:PR:<code>594</code></li>
<li>Use single key in JWK if JWS does not specify <code>kid</code>, via
:PR:<code>596</code></li>
<li>Fix error when RFC9068 JWS has no scope field, via
:PR:<code>598</code></li>
<li>Get werkzeug version using importlib, via :PR:<code>591</code></li>
</ul>
<p><strong>New features</strong>:</p>
<ul>
<li>RFC9068 implementation, via :PR:<code>586</code>, by <a
href="https://github.com/azmeuk"><code>@azmeuk</code></a>.</li>
</ul>
<p><strong>Breaking changes</strong>:</p>
<ul>
<li>End support for python 3.7</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="a7d68b4c3b"><code>a7d68b4</code></a>
chore: release 1.3.0</li>
<li><a
href="a26f1d0993"><code>a26f1d0</code></a>
Merge GitHub action for release</li>
<li><a
href="2d66702dec"><code>2d66702</code></a>
Merge pull request <a
href="https://redirect.github.com/lepture/authlib/issues/591">#591</a>
from Sparrow0hawk/patch-2</li>
<li><a
href="0f8e08738b"><code>0f8e087</code></a>
docs: add changelog for 1.3.0</li>
<li><a
href="3ffc950d5b"><code>3ffc950</code></a>
chore: fix pypi release action</li>
<li><a
href="a2543b9ad0"><code>a2543b9</code></a>
chore: add pypi github action</li>
<li><a
href="c7e1b2d41d"><code>c7e1b2d</code></a>
chore: move configuration from setup.cfg to pyproject.toml</li>
<li><a
href="04e83f60ae"><code>04e83f6</code></a>
Merge pull request <a
href="https://redirect.github.com/lepture/authlib/issues/598">#598</a>
from tanguilp/fix-rfc9068-no-scope-in-jws</li>
<li><a
href="092f688b0d"><code>092f688</code></a>
Fix error when RFC9068 JWS has no scope field</li>
<li><a
href="ac58322655"><code>ac58322</code></a>
Get werkzeug version using importlib</li>
<li>Additional commits viewable in <a
href="https://github.com/lepture/authlib/compare/v1.2.1...v1.3.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
The idea here being that the directory server shouldn't advertise rooms
to a requesting server is the requesting server would not be allowed to
join or participate in the room.
<!--
Fixes: # <!-- -->
<!--
Supersedes: # <!-- -->
<!--
Follows: # <!-- -->
<!--
Part of: # <!-- -->
Base: `develop` <!-- git-stack-base-branch:develop -->
<!--
This pull request is commit-by-commit review friendly. <!-- -->
<!--
This pull request is intended for commit-by-commit review. <!-- -->
Original commit schedule, with full messages:
<ol>
<li>
Pass `from_federation_origin` down into room list retrieval code
</li>
<li>
Don't cache /publicRooms response for inbound federated requests
</li>
<li>
fixup! Don't cache /publicRooms response for inbound federated requests
</li>
<li>
Cap the number of /publicRooms entries to 100
</li>
<li>
Simplify code now that you can't request unlimited rooms
</li>
<li>
Filter out rooms from federated requests that don't have the correct ACL
</li>
<li>
Request a handful more when filtering ACLs so that we can try to avoid
shortchanging the requester
</li>
</ol>
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
There are a couple of things we need to be careful of here:
1. The current python code does no validation when loading from the DB,
so we need to be careful to ignore such errors (at least on jki.re there
are some old events with internal metadata fields of the wrong type).
2. We want to be memory efficient, as we often have many hundreds of
thousands of events in the cache at a time.
---------
Co-authored-by: Quentin Gliech <quenting@element.io>
We remove these fields as they're just duplicating data the event
already stores, and (for reasons 🤫) I'd like to simplify
the class to only store simple types.
I'm not entirely convinced that we shouldn't instead add helper methods
to the event class to generate stream tokens, but I don't really think
that's where they belong either
This is an extra response parameter just added to MSC3981. In the
current impl, the recursion depth is always 3, so this just returns a
static 3 if the recurse parameter is supplied.
Previously, the response status of `HTMLResource` was hardcoded as
`200`. However, for proper redirection after the user verifies their
email, we require the status to be `302`. This PR addresses that issue
by using `code` as response status.
Added in https://github.com/matrix-org/synapse/pull/16533, this workflow
was intended to be run once to add the version picker to all historical
versions of the https://matrix-org.github.io/synapse documentation
website.
Note that the latest version of the docs built from this repo now exist
at https://element-hq.github.io/synapse/.
The workflow has been run successfully and the version picker was added
to the documentation. Thus we can now delete this workflow.
---
Note: Do not confuse this PR with
https://github.com/matrix-org/synapse/issues/9453. This PR was made
while we were populating this repo with "Dummy issues" after the
changeover from matrix-org/synapse to element-hq/synapse - therefore
referencing this PR may cause some confusion.
Closes:
- https://github.com/matrix-org/synapse/issues/10397
- #10397
An administrator should know whether he wants to set a password or not.
There are many uses cases where a blank password is required.
- Use of only some users with SSO.
- Use of bots with password, users with SSO
This reverts two commits:
0bb8e418a4
"Fix postgres schema after dropping old tables (#16730)"
and
51e4e35653
"Add a Postgres `REPLICA IDENTITY` to tables that do not have an implicit one. This should allow use of Postgres logical replication. (take 2, now with no added deadlocks!) (#16658)"
and also amends the changelog.
* Add `ALTER TABLE ... REPLICA IDENTITY ...` for individual tables
We can't combine them into one file as it makes it likely to hit a deadlock
if Synapse is running, as it only takes one other transaction to access two
tables in a different order to the schema delta.
* Add notes
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Re-introduce REPLICA IDENTITY test
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
poetry-core 1.8.x includes a fix which properly moves the generate
synapse_rust.abi3.so file to the synapse directory when using an
editable install.
Without this change developers are left with a confusing experience
of the synapse.synapse_rust module not being found after installation.
Implement MSC3860 to follow redirects for federated media downloads.
Note that the Client-Server API doesn't support this (yet) since the media
repository in Synapse doesn't have a way of supporting redirects.
* Describe `insert_client_ip`
* Pull out client_ips and MAU tracking to BaseAuth
* Define HAS_AUTHLIB once in tests
sick of copypasting
* Track ips and token usage when delegating auth
* Test that we track MAU and user_ips
* Don't track `__oidc_admin`
pip was using a vendored setuptools that was incompatible with
Python 3.12. Upgrading cibuildwheels to a version with a newer
version of pip (and thus a newer version of setuptools) fixes
the issue.
Keeping track of a lower bound of stream ID where we've deleted everything below makes the queries much faster. Otherwise, every time we scan for rows to delete we'd re-scan across all the rows that have previously deleted (until the next table VACUUM).
If a worker reconnects to Redis we send out the current positions of all our streams. However, if we're also trying to send out a backlog of RDATA at the same time then we can end up sending a `POSITION` with the current token *before* we've sent all the RDATA before the current token.
This doesn't cause actual bugs as the receiving servers see the POSITION, fetch the relevant rows from the DB, and then ignore the old RDATA as they come in. However, this is inefficient so it'd be better if we didn't send out-of-order positions
* Fix the CI query that did not detect all cases of missing primary keys
* Add more missing REPLICA IDENTITY entries
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Add Postgres replica identities to tables that don't have an implicit one
Fixes#16224
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Move the delta to version 83 as we missed the boat for 82
* Add a test that all tables have a REPLICA IDENTITY
* Extend the test to include when indices are deleted
* isort
* black
* Fully qualify `oid` as it is a 'hidden attribute' in Postgres 11
* Update tests/storage/test_database.py
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* Add missed tables
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
If simple_{insert,upsert,update}_many_txn is called without any data
to modify then return instead of executing the query.
This matches the behavior of simple_{select,delete}_many_txn.
Fetch information needed for push rule evaluation in parallel.
Ideally this would use query pipelining, but this is not
available in psycopg2.
Due to the database thread pool this may result in little
to no parallelization.
Previously only Twisted's EPollReactor was compatible with the
reactor timing metric, notably not working when asyncio was used.
After this change, the following configurations support the reactor
timing metric:
* poll, epoll, or select reactors
* asyncio reactor with a poll, epoll, select, /dev/poll, or kqueue event loop.
The event persistence code used to handle multiple rooms
at a time, but was simplified to only ever be called with a
single room at a time (different rooms are now handled in
parallel). The code is still generic to multiple rooms causing
a lot of work that is unnecessary (e.g. unnecessary loops, and
partitioning data by room).
This strips out the ability to handle multiple rooms at once, greatly
simplifying the code.
Just to standardize on the normal helpers, it might also have
a slight perf improvement on PostgreSQL which will now use
`ANY (?)` instead of `IN (?, ?, ...)`.
* complement: enable dirty runs
* Add changelog
* Set a low connpool limit when running in Complement
Dirty runs can cause many containers to be running concurrently,
which seems to easily exhaust resources on the host. The increased
speedup from dirty runs also seems to use more db connections on
workers, which are misconfigured currently to have
`SUM(workers * cp_max) > max_connections`, causing
```
FATAL: sorry, too many clients already
```
which results in tests failing.
* Try p=2 concurrency to restrict slowness of servers which causes partial state join tests to flake
* Debug logging
* Only run flakey tests
* Only adjust connection pool limits in worker mode
* Move cp vars to somewhere where they get executed in CI
* Move cp values back to where they actually work
* Debug logging
* Try p=1 to see if this makes worker mode happier
* Remove debug logging
This is mostly useful for federated rooms where some users
would get stuck in the invite or knock state when the room
was purged from their homeserver.
This adds a module API which allows a module to update a user's
presence state/status message. This is useful for controlling presence
from an external system.
To fully control presence from the module the presence.enabled config
parameter gains a new state of "untracked" which disables internal tracking
of presence changes via user actions, etc. Only updates from the module will
be persisted and sent down sync properly).
Twisted trunk makes a change to the `TLSMemoryBIOFactory` where
the underlying protocol is changed from `TLSMemoryBIOProtocol` to
`BufferingTLSTransport` to improve performance of TLS code (see
https://github.com/twisted/twisted/issues/11989).
In order to properly hook this code up in tests we need to pass the test
reactor's clock into `TLSMemoryBIOFactory` to avoid the global (trial)
reactor being used by default.
Twisted does something similar internally for tests:
157cd8e659/src/twisted/web/test/test_agent.py (L871-L874)
This reverts commit 5fe76b9434.
I think I had this accidentally commited on my local develop branch, and
so it accidentally got merged into upstream develop.
This should re-land with corrections in #16504.
* Fix bug where a new writer advances their token too quickly
When starting a new writer (for e.g. persisting events), the
`MultiWriterIdGenerator` doesn't have a minimum token for it as there
are no rows matching that new writer in the DB.
This results in the the first stream ID it acquired being announced as
persisted *before* it actually finishes persisting, if another writer
gets and persists a subsequent stream ID. This is due to the logic of
setting the minimum persisted position to the minimum known position of
across all writers, and the new writer starts off not being considered.
* Fix sending out POSITIONs when our token advances without update
Broke in #14820
* For replication HTTP requests, only wait for minimal position
This could happen if the last rows in the account data stream were inserted into `account_data`. After a restart the max account ID would be calculated without looking at the `account_data` table, and so have an old ID.
If using the script remotely, there's no particularly convincing reason
to disable certificate verification, as this makes the connection
interceptible.
If on the other hand, the script is used locally (the most common use
case), you can simply target the HTTP listener and avoid TLS altogether.
This is what the script already attempts to do if passed a homeserver
configuration YAML file.
This splits thinsg into two queries, but most of the time we won't have
new event backwards extremities so this shouldn't actually add an extra
RTT for the majority of cases.
Note this removes the check for events with no prev events, but that was
part of MSC2716 work that has since been removed.
Synapse was incorrectly implemented with a knock_state_events
property on some APIs (instead of knock_room_state). This was
correct in Synapse 1.70.0, but *both* fields were sent to also be
compatible with Synapse versions expecting the wrong field.
Enough time has passed that only the correct field needs to be
included/handled.
This converts the media servlet URLs in the same way as
(most) of the rest of Synapse. This will give more flexibility
in the versions each endpoint exists under.
This avoids calling cursor_to_dict and then immediately
unpacking the values in the dict for other users. By not
creating the intermediate dictionary we can avoid allocating
the dictionary and strings for the keys, which should generally
be more performant.
Additionally this improves type hints by avoid Dict[str, Any]
dictionaries coming out of the database layer.
Co-authored-by: David Robertson <davidr@element.io>
Co-authored-by: Patrick Cloke <patrickc@matrix.org>
Co-authored-by: Erik Johnston <erik@matrix.org>
Assert that the return type of callables wrapped in @cached
and @cachedList are cachable (aka immutable).
This is because if a worker reaches ~100% CPU then everything starts
lagging and we hit the log line a lot. When at error we invoke sentry
and that has a lot of overhead, which then puts even more pressure on
the worker.
There are no known bugs in the message retention code, but
it is possible that there still exists race conditions. Additional
fixes will be made as reported.
This allows maturin >= 0.15 to build the properly named
shared library object.
For now the old configuration is also kept to allow for
older maturin installs to be used.
Also add restore of purge/shutdown rooms after a synapse restart.
Co-authored-by: Eric Eastwood <erice@matrix.org>
Co-authored-by: Erik Johnston <erikj@matrix.org>
Refresh tokens were not correctly moved to the rehydrated
device (similar to how the access token is currently handled).
This resulted in invalid refresh tokens after rehydration.
Adds both the List-Unsubscribe (RFC2369) and List-Unsubscribe-Post (RFC8058)
headers to push notification emails, which together should:
* Show an "Unsubscribe" link in the MUA UI when viewing Synapse notification emails.
* Enable "one-click" unsubscribe (the user never leaves their MUA, which automatically
makes a POST request to the specified endpoint).
Using the new `TaskScheduler` meant that we'ed create lots of new
metrics (due to adding task ID to the desc of background process),
resulting in requests for metrics taking an increasing amount of CPU.
* Allow user_id to be optional for room deletion
* Add module API method to delete a room
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Don't worry about the case block=True && requester_user_id is None
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
Add a (long) timeout to when a "busy" device is considered not online.
This does *not* match MSC3026, but is a reasonable thing for an
implementation to do.
Expands tests for the (unstable) busy presence with multiple devices.
Tracks presence on an individual per-device basis and combine
the per-device state into a per-user state. This should help in
situations where a user has multiple devices with conflicting status
(e.g. one is syncing with unavailable and one is syncing with online).
The tie-breaking is done by priority:
BUSY > ONLINE > UNAVAILABLE > OFFLINE
* Fix rare bug that broke looping calls
We can't interact with the reactor from the main thread via looping
call.
Introduced in v1.90.0 / #15791.
* Newsfile
Refactoring to use both the user ID & the device ID when tracking
the currently syncing users in the presence handler.
This is done both locally and over replication. Note that the device
ID is discarded but will be used in a future change.
Refactoring to pass the device ID (in addition to the user ID) through
the presence handler (specifically the `user_syncing`, `set_state`,
and `bump_presence_active_time` methods and their replication
versions).
Simplify some of the presence code by reducing duplicated code between
worker & non-worker modes.
The main change is to push some of the logic from `user_syncing` into
`set_state`. This is done by passing whether the user is setting the presence
via a `/sync` with a new `is_sync` flag to `set_state`. If this is `true` some
additional logic is performed:
* Don't override `busy` presence.
* Update the `last_user_sync_ts`.
* Never update the status message.
* Properly update retry_last_ts when hitting the maximum retry interval
This was broken in 1.87 when the maximum retry interval got changed from
almost infinite to a week (and made configurable).
fixes#16101
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
* Add changelog
* Change fix + add test
* Add comment
---------
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
Co-authored-by: Mathieu Velten <mathieuv@matrix.org>
This should only be called on HomeServer objects which are configured
to run background tasks, which is automatically (and properly) done via
the call to setup().
If we don't have all the auth events in a room then not all state events will have a chain cover index. Even so, we can still use the chain cover index on the events that do have it, rather than bailing and using the slower functions.
This situation should not arise for newly persisted rooms, as we check we have the full auth chain for each event, but can happen for existing rooms.
c.f. #15245
We were seeing serialization errors when taking out multiple read locks.
The transactions were retried, so isn't causing any failures.
Introduced in #15782.
* Fix the method signature of `run_db_interaction` on the module API
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
Misc. clean-ups to:
* Use keyword arguments.
* Return early (reducing indentation) of some functions.
* Removing duplicated / unused code.
* Use wrap_as_background_process.
* Add a module API function to provide `call_later`
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Add comments
* Update version number
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Add a cache invalidation clean-up task
* Run the cache invalidation stream clean-up on the background worker
* Tune down
* call_later is in millis!
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* fixup! Add a cache invalidation clean-up task
* Update synapse/storage/databases/main/cache.py
Co-authored-by: Eric Eastwood <erice@element.io>
* Update synapse/storage/databases/main/cache.py
Co-authored-by: Eric Eastwood <erice@element.io>
* MILLISEC -> MS
* Expand on comment
* Move and tweak comment about Postgres
* Use `wrap_as_background_process`
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
Co-authored-by: Eric Eastwood <erice@element.io>
**IF YOU HAVE SUPPORT QUESTIONS ABOUT RUNNING OR CONFIGURING YOUR OWN HOME SERVER**, please ask in **[#synapse:matrix.org](https://matrix.to/#/#synapse:matrix.org)** (using a matrix.org account if necessary).
If you want to report a security issue, please see https://matrix.org/security-disclosure-policy/
If you want to report a security issue, please see https://element.io/security/security-disclosure-policy
This is a bug report form. By following the instructions below and completing the sections with your information, you will help the us to get all the necessary data to fix your issue.
@@ -86,7 +86,7 @@ body:
If PostgreSQL, please also answer the following:
- are you using a single PostgreSQL server
or [separate servers for `main` and `state`](https://matrix-org.github.io/synapse/latest/usage/configuration/config_documentation.html#databases)?
or [separate servers for `main` and `state`](https://element-hq.github.io/synapse/latest/usage/configuration/config_documentation.html#databases)?
- have you previously ported from SQLite using the Synapse "portdb" script?
- have you previously restored from a backup?
validations:
@@ -97,7 +97,7 @@ body:
label:Workers
description:|
Are you running a single Synapse process, or are you running
[2 or more workers](https://matrix-org.github.io/synapse/latest/workers.html)?
[2 or more workers](https://element-hq.github.io/synapse/latest/workers.html)?
options:
- Single process
- Multiple workers
@@ -121,9 +121,9 @@ body:
Do you have any unusual config options turned on? If so, please provide details.
<!-- Please read https://matrix-org.github.io/synapse/latest/development/contributing_guide.html before submitting your pull request -->
<!-- Please read https://element-hq.github.io/synapse/latest/development/contributing_guide.html before submitting your pull request -->
* [ ] Pull request is based on the develop branch
* [ ] Pull request includes a [changelog file](https://matrix-org.github.io/synapse/latest/development/contributing_guide.html#changelog). The entry should:
* [ ] Pull request includes a [changelog file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog). The entry should:
- Be a short description of your change which makes sense to users. "Fixed a bug that prevented receiving messages from other servers." instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by @github_username." or "Contributed by [Your Name]." to the end of the entry.
* [ ]Pull request includes a [sign off](https://matrix-org.github.io/synapse/latest/development/contributing_guide.html#sign-off)
* [ ] [Code style](https://matrix-org.github.io/synapse/latest/code_style.html) is correct
(run the [linters](https://matrix-org.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
* [ ][Code style](https://element-hq.github.io/synapse/latest/code_style.html) is correct
(run the [linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
giving admins the power to easily manage an organization-wide
deployment. It includes advanced identity management, auditing,
moderation and data retention options as well as Long Term Support and
SLAs. ESS can be used to support any Matrix-based frontend client.
..contents::
Installing and configuration
============================
🛠️ Installing and configuration
===============================
The Synapse documentation describes `how to install Synapse <https://matrix-org.github.io/synapse/latest/setup/installation.html>`_. We recommend using
`Docker images <https://matrix-org.github.io/synapse/latest/setup/installation.html#docker-images-and-ansible-playbooks>`_ or `Debian packages from Matrix.org
The Synapse documentation describes `how to install Synapse <https://element-hq.github.io/synapse/latest/setup/installation.html>`_. We recommend using
`Docker images <https://element-hq.github.io/synapse/latest/setup/installation.html#docker-images-and-ansible-playbooks>`_ or `Debian packages from Matrix.org
Add`org.opencontainers.image.version` labels to Docker containers [published by Matrix.org](https://hub.docker.com/r/matrixdotorg/synapse). Contributed by Mo Balaa.
Add`org.opencontainers.image.version` labels to Docker containers [published by Matrix.org](https://hub.docker.com/r/matrixdotorg/synapse). Contributed by Mo Balaa.
Using the concepts shown here it is possible to create other worker types in Docker Compose. See the [Workers](https://matrix-org.github.io/synapse/latest/workers.html#available-worker-applications) documentation for a list of available workers.
Using the concepts shown here it is possible to create other worker types in Docker Compose. See the [Workers](https://element-hq.github.io/synapse/latest/workers.html#available-worker-applications) documentation for a list of available workers.
0. Set up Prometheus and Grafana. Out of scope for this readme. Useful documentation about using Grafana with Prometheus: http://docs.grafana.org/features/datasources/prometheus/
1. Have your Prometheus scrape your Synapse. https://matrix-org.github.io/synapse/latest/metrics-howto.html
1. Have your Prometheus scrape your Synapse. https://element-hq.github.io/synapse/latest/metrics-howto.html
2. Import dashboard into Grafana. Download `synapse.json`. Import it to Grafana and select the correct Prometheus datasource. http://docs.grafana.org/reference/export_import/
3. Set up required recording rules. [contrib/prometheus](../prometheus)
# Creating multiple stream writers with a bash script
This script creates multiple [stream writer](https://github.com/matrix-org/synapse/blob/develop/docs/workers.md#stream-writers) workers.
This script creates multiple [stream writer](https://github.com/element-hq/synapse/blob/develop/docs/workers.md#stream-writers) workers.
Stream writers require both replication and HTTP listeners.
@@ -8,7 +8,7 @@ It also prints out the example lines for Synapse main configuration file.
Remember to route necessary endpoints directly to a worker associated with it.
If you run the script as-is, it will create workers with the replication listener starting from port 8034 and another, regular http listener starting from 8044. If you don't need all of the stream writers listed in the script, just remove them from the ```STREAM_WRITERS``` array.
If you run the script as-is, it will create workers with the replication listener starting from port 8034 and another, regular http listener starting from 8044. If you don't need all of the stream writers listed in the script, just remove them from the ```STREAM_WRITERS``` array.
Hint: Note that `worker_pid_file` is required if `worker_daemonize` is `true`. Uncomment and/or modify the line if needed.
@@ -71,7 +71,7 @@ cat << EXAMPLECONFIG
# Don't forget to configure your reverse proxy and
# necessary endpoints to their respective worker.
# See https://github.com/matrix-org/synapse/blob/develop/docs/workers.md
# See https://github.com/element-hq/synapse/blob/develop/docs/workers.md
# for more information.
# Remember: Under NO circumstances should the replication
@@ -102,7 +102,7 @@ You should receive an output similar to the following:
# Don't forget to configure your reverse proxy and
# necessary endpoints to their respective worker.
# See https://github.com/matrix-org/synapse/blob/develop/docs/workers.md
# See https://github.com/element-hq/synapse/blob/develop/docs/workers.md
# for more information
# Remember: Under NO circumstances should the replication
@@ -138,14 +138,14 @@ Simply copy-and-paste the output to an appropriate place in your Synapse main co
## Write directly to Synapse configuration file
You could also write the output directly to homeserver main configuration file. **This, however, is not recommended** as even a small typo (such as replacing >> with >) can erase the entire ```homeserver.yaml```.
You could also write the output directly to homeserver main configuration file. **This, however, is not recommended** as even a small typo (such as replacing >> with >) can erase the entire ```homeserver.yaml```.
If you do this, back up your original configuration file first:
The above command will generate a `homeserver.yaml` in (typically)
`/var/lib/docker/volumes/synapse-data/_data`. You should check this file, and
@@ -78,7 +78,7 @@ The following environment variables are supported in `generate` mode:
## Postgres
By default the config will use SQLite. See the [docs on using Postgres](https://github.com/matrix-org/synapse/blob/develop/docs/postgres.md) for more info on how to use Postgres. Until this section is improved [this issue](https://github.com/matrix-org/synapse/issues/8304) may provide useful information.
By default the config will use SQLite. See the [docs on using Postgres](https://github.com/element-hq/synapse/blob/develop/docs/postgres.md) for more info on how to use Postgres. Until this section is improved [this issue](https://github.com/element-hq/synapse/issues/8304) may provide useful information.
## Running synapse
@@ -151,10 +151,10 @@ is suitable for local testing, but for any practical use, you will either need
to use a reverse proxy, or configure Synapse to expose an HTTPS port.
**Note:** This API is disabled when MSC3861 is enabled. [See #15582](https://github.com/matrix-org/synapse/pull/15582)
This API allows a server administrator to manage the validity of an account. To
use it, you must enable the account validity feature (under
`account_validity`) in Synapse's configuration.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
